Christian

Prof. Dr. Christian Greiner

Research Focus

  •      „Materials Tribology“, focusing on the elementary mechanisms for the microstructure evolution under tribological loading
  •      High resolution electron and ion microscopy
  •      Contact mechanics; Bio-inspired materials

Publications


2024
Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation
Zhou, Q.; Jiao, Z.; Huang, Z.; Shi, Y.; Li, Y.; Yin, C.; Wang, H.; Pinto, H. C.; Greiner, C.; Liu, W.
2024. Acta Materialia, 279, 120299. doi:10.1016/j.actamat.2024.120299
Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system
Pereira, J. N.; Ott, V.; Afonso, C. R. M.; de Sousa Malafaia, A. M.; Stüber, M.; Greiner, C.; Pinto, H. C.
2024. Surface and Coatings Technology, 477, Art.-Nr.: 130369. doi:10.1016/j.surfcoat.2023.130369
Friction anisotropy and associated surface deformation mechanisms in heterogeneous copper/bronze laminates
Zhang, Q.; Li, Y.; Liang, F.; Zhou, Z.; Li, Y.; Rau, J.; Greiner, C.; Zhao, Y.; Zhu, Y.; Chen, X.
2024. Materials Characterization, 208, 113644. doi:10.1016/j.matchar.2024.113644
Deformation twins as a probe for tribologically induced stress states
Dollmann, A.; Kübel, C.; Tavakkoli, V.; Eder, S. J.; Feuerbacher, M.; Liening, T.; Kauffmann, A.; Rau, J.; Greiner, C.
2024. Communications Materials, 5 (1), Art.-Nr.: 4. doi:10.1038/s43246-023-00442-8
Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature
Ren, Y.; Zhou, Q.; Hua, D.; Huang, Z.; Li, Y.; Jia, Q.; Gumbsch, P.; Greiner, C.; Wang, H.; Liu, W.
2024. Science Bulletin, 69 (2), 227–236. doi:10.1016/j.scib.2023.12.003
2023
Effect of height waviness on the friction behavior of 100Cr6 steel under mixed or hydrodynamic lubrication
Yue, H.; Vaitkunaite, G.; Li, Y.; Schneider, J.; Greiner, C.; Gumbsch, P.
2023. Tribologie und Schmierungstechnik, 70 (eOnly Son…rausgabe 2), 4–8. doi:10.24053/TuS-2023-0040
A Framework to Generate, Store, and Publish FAIR Data in Experimental Sciences
Garabedian, N.; Bagov, I.; Flachmann, M.; Ye, N.; Meller, M.; Bresser, F.; Greiner, C.
2023. SEMPDS 2023: Posters and Demos at SEMANTiCS 2023 - 19th International Conference on Semantic Systems (SEMANTICS), Leipzig, 20th-22nd September 2023, 5 S., CEUR-WS
Waviness Affects Friction and Abrasive Wear
Li, Y.; Garabedian, N.; Schneider, J.; Greiner, C.
2023. Tribology Letters, 71 (2), Art.-Nr.: 64. doi:10.1007/s11249-023-01736-1
Temporal sequence of deformation twinning in CoCrNi under tribological load
Dollmann, A.; Rau, J. S.; Bieber, B.; Mantha, L.; Kübel, C.; Kauffmann, A.; Tirunilai, A. S.; Heilmaier, M.; Greiner, C.
2023. Scripta Materialia, 229, Art.-Nr.: 115378. doi:10.1016/j.scriptamat.2023.115378
2022
Generating FAIR research data in experimental tribology
Garabedian, N. T.; Schreiber, P. J.; Brandt, N.; Zschumme, P.; Blatter, I. L.; Dollmann, A.; Haug, C.; Kümmel, D.; Li, Y.; Meyer, F.; Morstein, C. E.; Rau, J. S.; Weber, M.; Schneider, J.; Gumbsch, P.; Selzer, M.; Greiner, C.
2022. Scientific Data, 9 (1), Art.Nr. 315. doi:10.1038/s41597-022-01429-9
Injection Molding of Magnesium Aluminate Spinel Nanocomposites for High‐Throughput Manufacturing of Transparent Ceramics
Mader, M.; Prediger, R.; Schell, K. G.; Schmidt, G.; Dorn, A.; Dorn, A.; Jenne, S.; Kluck, S.; Hambitzer, L.; Luitz, M.; Luitz, M.; Schwarz, C.; Milich, M.; Greiner, C.
2022. Advanced Science, 9 (31), Art.Nr. 2204385. doi:10.1002/advs.202204385
Three regimes in the tribo‐oxidation of high purity copper at temperatures of up to 150°C
Rau, J. S.; Schmidt, O.; Schneider, R.; Debastiani, R.; Greiner, C.
2022. Advanced Engineering Materials, 24 (11), Art.Nr. 2200518. doi:10.1002/adem.202200518
Outstanding Bio-Tribological Performance Induced by the Synergistic Effect of 2D Diamond Nanosheet Coating and Silk Fibroin
Chen, H.; Cai, T.; Ruan, X.; Jiao, C.; Xia, J.; Wei, X.; Wang, Y.; Gong, P.; Li, H.; Atkin, R.; Yin, G.; Zhou, X.; Nishimura, K.; Rosenkranz, A.; Greiner, C.; Wang, B.; Yu, J.; Jiang, N.
2022. ACS Applied Materials and Interfaces, 14 (42), 48091–48105. doi:10.1021/acsami.2c12552
Role of Nitrogen and Yttrium Contents in Manufacturing (Cr, Y)Nx Film Nanostructures
Apolinario, R. C.; Rodrigues, A. M.; Avila, P. R. T.; Pereira, J. N.; Ramirez, C. A. O.; Daum, P.; Costa, F. P. da; Lira, H. de L.; Neves, G. de A.; Greiner, C.; Pinto, H. C.
2022. Nanomaterials, 12 (14), Art.Nr.: 2410. doi:10.3390/nano12142410
Deformation and phase transformation in polycrystalline cementite (FeC) during single- and multi-pass sliding wear
Tsybenko, H.; Tian, C.; Rau, J.; Breitbach, B.; Schreiber, P.; Greiner, C.; Dehm, G.; Brinckmann, S.
2022. Acta Materialia, 227, Art.-Nr.: 117694. doi:10.1016/j.actamat.2022.117694
Managing FAIR Tribological Data Using Kadi4Mat
Brandt, N.; Garabedian, N. T.; Schoof, E.; Schreiber, P. J.; Zschumme, P.; Greiner, C.; Selzer, M.
2022. Data, 7 (2), Art.-Nr. 15. doi:10.3390/data7020015
Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118
Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Srinivasan Tirunilai, A.; Mantha, L. S.; Kübel, C.; Eder, S. J.; Schneider, J.; Greiner, C.
2022. Journal of Materials Science, 57, 17448–17461. doi:10.1007/s10853-022-07661-3
Replicative manufacturing of metal moulds for low surface roughness polymer replication
Kluck, S.; Hambitzer, L.; Luitz, M.; Mader, M.; Sanjaya, M.; Balster, A.; Milich, M.; Greiner, C.; Kotz-Helmer, F.; Rapp, B. E.
2022. Nature Communications, 13 (1), Art.-Nr.: 5048. doi:10.1038/s41467-022-32767-2
Tribological mechanisms of slurry abrasive wear
Li, Y.; Schreiber, P.; Schneider, J.; Greiner, C.
2022. Friction, 11 (6), 1079–1093. doi:10.1007/s40544-022-0654-1
Tailoring the Hybrid Magnetron Sputtering Process (HiPIMS and dcMS) to Manufacture Ceramic Multilayers: Powering Conditions, Target Materials, and Base Layers
de Castilho, B. C. N. M.; de Sousa Mazuco, F.; Rodrigues, A. M.; Avila, P. R. T.; Apolinario, R. C.; Daum, P.; da Costa, F. P.; Menezes, R. R.; de Araújo Neves, G.; Greiner, C.; Pinto, H. C.
2022. Nanomaterials, 12 (14), Art.-Nr.: 2465. doi:10.3390/nano12142465
On the origin of plasticity-induced microstructure change under sliding contacts
Xu, Y.; Balint, D. S.; Greiner, C.; Dini, D.
2022. Friction, 11 (3), 473–488. doi:10.1007/s40544-022-0624-7
A wear-resistant metastable CoCrNiCu high-entropy alloy with modulated surface and subsurface structures
Ren, Y.; Jia, Q.; Du, Y.; Zhou, Q.; Greiner, C.; Hua, K.; Wang, H.; Wang, J.
2022. Friction, 10 (10), 1722–1738. doi:10.1007/s40544-022-0606-9
Tribologically induced crystal rotation kinematics revealed by electron backscatter diffraction
Haug, C.; Molodov, D.; Gumbsch, P.; Greiner, C.
2022. Acta Materialia, 225, Art.-Nr.: 117566. doi:10.1016/j.actamat.2021.117566
2021
Melt-Extrusion-Based Additive Manufacturing of Transparent Fused Silica Glass
Mader, M.; Hambitzer, L.; Schlautmann, P.; Jenne, S.; Greiner, C.; Hirth, F.; Helmer, D.; Kotz-Helmer, F.; Rapp, B. E.
2021. Advanced Science, 8 (23), Art.-Nr. 2103180. doi:10.1002/advs.202103180
High diffusivity pathways govern massively enhanced oxidation during tribological sliding
Rau, J. S.; Balachandran, S.; Schneider, R.; Gumbsch, P.; Gault, B.; Greiner, C.
2021. Acta Materialia, 221, Art.-Nr.: 117353. doi:10.1016/j.actamat.2021.117353
Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films
Luo, D.; Zhou, Q.; Ye, W.; Ren, Y.; Greiner, C.; He, Y.; Wang, H.
2021. ACS Applied Materials and Interfaces, 13 (46), 55712–55725. doi:10.1021/acsami.1c16949
On the origin of microstructural discontinuities in sliding contacts: A discrete dislocation plasticity analysis
Xu, Y.; Ruebeling, F.; Balint, D.; Greiner, C.; Dini, D.
2021. International Journal of Plasticity, 138, Article no: 102942. doi:10.1016/j.ijplas.2021.102942
Characterization of the Microstructure After Composite Peening of Aluminum
Seitz, M.; Dürrschnabel, M.; Kauffmann, A.; Kurpiers, C.; Greiner, C.; Weidenmann, K. A.
2021. Advanced engineering materials, 23 (2), Art.Nr. 2000575. doi:10.1002/adem.202000575
Normal Load and Counter Body Size Influence the Initiation of Microstructural Discontinuities in Copper during Sliding
Ruebeling, F.; Xu, Y.; Richter, G.; Dini, D.; Gumbsch, P.; Greiner, C.
2021. ACS applied materials & interfaces, 13 (3), 4750–4760. doi:10.1021/acsami.0c19736
How Tribo-Oxidation Alters the Tribological Properties of Copper and Its Oxides
Lehmann, J. S.; Schwaiger, R.; Rinke, M.; Greiner, C.
2021. Advanced materials interfaces, 8 (1), Art.-Nr.: 2001673. doi:10.1002/admi.202001673
Subsurface microstructural evolution during scratch testing on Bcc iron
Linsler, D.; Ruebeling, F.; Greiner, C.
2021. Metals, 11 (8), 1258. doi:10.3390/met11081258
The Force Cone Method Applied to Explain Hidden Whirls in Tribology
Mattheck, C.; Greiner, C.; Bethge, K.; Tesari, I.; Weber, K.
2021. Materials, 14 (14), Art.-Nr. 3894. doi:10.3390/ma14143894
Tribological Performance of Additively Manufactured AISI H13 Steel in Different Surface Conditions
Guenther, E.; Kahlert, M.; Vollmer, M.; Niendorf, T.; Greiner, C.
2021. Materials, 14 (4), 928. doi:10.3390/ma14040928
Variations in strain affect friction and microstructure evolution in copper under a reciprocating tribological load
Becker, S.; Schulz, K.; Scherhaufer, D.; Gumbsch, P.; Greiner, C.
2021. Journal of Materials Research, 36, 970–981. doi:10.1557/s43578-020-00050-z
2020
Solid solution strengthening and deformation behavior of single-phase Cu-base alloys under tribological load
Laube, S.; Kauffmann, A.; Ruebeling, F.; Freudenberger, J.; Heilmaier, M.; Greiner, C.
2020. Acta materialia, 185, 300–308. doi:10.1016/j.actamat.2019.12.005
Early deformation mechanisms in the shear affected region underneath a copper sliding contact
Haug, C.; Ruebeling, F.; Kashiwar, A.; Gumbsch, P.; Kübel, C.; Greiner, C.
2020. Nature Communications, 11 (1), Art.-Nr. 839. doi:10.1038/s41467-020-14640-2
Variation of the frictional anisotropy on ventral scales of snakes caused by nanoscale steps
Wu, W.; Yu, S.; Schreiber, P.; Dollmann, A.; Lutz, C.; Gomard, G.; Greiner, C.; Hölscher, H.
2020. Bioinspiration & biomimetics, 15 (5), Art.-Nr.: 056014. doi:10.1088/1748-3190/ab9e51
Site-Specific Controlled Growth of Coiled Lambda-Shaped Carbon Nanofibers for Potential Application in Catalyst Support and Nanoelectronics
Lutz, C.; Bog, U.; Thelen, R.; Syurik, J.; Malik, S.; Greiner, C.; Hölscher, H.; Hirtz, M.
2020. ACS applied nano materials, 3 (8), 7899–7907. doi:10.1021/acsanm.0c01374
Tribological performance and microstructural evolution of α-brass alloys as a function of zinc concentration
Liu, Z.; Messer-Hannemann, P.; Laube, S.; Greiner, C.
2020. Friction, 8, 1117–1136. doi:10.1007/s40544-019-0345-8
Microstructural changes in CoCrFeMnNi under mild tribological load
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Haug, C.; Greiner, C.
2020. Journal of materials science, 55 (26), 12353–12372. doi:10.1007/s10853-020-04806-0
2019
Solids Under Extreme Shear: Friction-Mediated Subsurface Structural Transformations
Greiner, C.; Gagel, J.; Gumbsch, P.
2019. Advanced materials, 31 (26), Art.Nr.: 1806705. doi:10.1002/adma.201806705
Carbon Nanofibers: Locally Controlled Growth of Individual Lambda-Shaped Carbon Nanofibers
Lutz, C.; Bog, U.; Loritz, T.; Syurik, J.; Malik, S.; Kumar, C. N. S.; Kübel, C.; Bruns, M.; Greiner, C.; Hirtz, M.; Hölscher, H.
2019. Small, 15 (7), 1970036. doi:10.1002/smll.201970036
Insights into tribology from in situ nanoscale experiments
Jacobs, T. D. B.; Greiner, C.; Wahl, K. J.; Carpick, R. W.
2019. MRS bulletin, 44 (6), 478–486. doi:10.1557/mrs.2019.122
Locally Controlled Growth of Individual Lambda-Shaped Carbon Nanofibers
Lutz, C.; Bog, U.; Loritz, T.; Syurik, J.; Malik, S.; Kumar, C. N. S.; Kübel, C.; Bruns, M.; Greiner, C.; Hirtz, M.; Hölscher, H.
2019. Small, Article no 1803944. doi:10.1002/smll.201803944
2018
The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
2018. Scripta materialia, 153, 63–67. doi:10.1016/j.scriptamat.2018.04.048
Nanocomposites: Glassomer-Processing Fused Silica Glass Like a Polymer (Adv. Mater. 22/2018) [Nur Titelseite]
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), Art.Nr. 1870151. doi:10.1002/adma.201870151
Glassomer-Processing Fused Silica Glass Like a Polymer
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), 1707100. doi:10.1002/adma.201707100
Friction reduction through biologically inspired scale-like laser surface textures
Schneider, J.; Djamiykov, V.; Greiner, C.
2018. Beilstein journal of nanotechnology, 9, 2561–2572. doi:10.3762/bjnano.9.238
Characterization of the microscopic tribological properties of sandfish (Scincus scincus) scales by atomic force microscopy
Wu, W.; Lutz, C.; Mersch, S.; Thelen, R.; Greiner, C.; Gomard, G.; Hölscher, H.
2018. Beilstein journal of nanotechnology, 9, 2618–2627. doi:10.3762/bjnano.9.243
Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
2018. Acta materialia, 161, 138–149. doi:10.1016/j.actamat.2018.09.016
Stages in the tribologically-induced oxidation of high-purity copper
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
2018. Scripta materialia, 153, 114–117. doi:10.1016/j.scriptamat.2018.05.008
2017
Transparent, abrasion-insensitive superhydrophobic coatings for real-world applications
Helmer, D.; Keller, N.; Kotz, F.; Stolz, F.; Greiner, C.; Nargang, T. M.; Sachsenheimer, K.; Rapp, B. E.
2017. Scientific reports, 7, Art.Nr. 15078. doi:10.1038/s41598-017-15287-8
Laser textured surfaces for mixed lubrication: Influence of aspect ratio, textured area and dimple arrangement
Schneider, J.; Braun, D. A.; Greiner, C.
2017. Lubricants, 5 (3), Art. Nr.: 32. doi:10.3390/lubricants5030032
2016
Sequence of Stages in the Microstructure Evolution in Copper under Mild Reciprocating Tribological Loading
Greiner, C.; Liu, Z.; Strassberger, L.; Gumbsch, P.
2016. ACS applied materials & interfaces, 8 (24), 15809–15819. doi:10.1021/acsami.6b04035
A reciprocating optical in situ tribometer with high-speed data acquisition
Becker, S.; Popp, U.; Greiner, C.
2016. Review of scientific instruments, 87 (8), 085101. doi:10.1063/1.4959883
Haften wie ein Gecko
Greiner, C.; Hölscher, H.
2016. Physik in unserer Zeit, 47 (3), 116–122. doi:10.1002/piuz.201601422
Chronology of the microstructure evolution for pearlitic steel under unidirectional tribological loading
Wolff, K.; Liu, Z.; Braun, D.; Schneider, J.; Greiner, C.
2016. Tribology international, 102, 540–545. doi:10.1016/j.triboint.2016.06.016
Liquid Glass: A Facile Soft Replication Method for Structuring Glass
Kotz, F.; Plewa, K.; Bauer, W.; Schneider, N.; Keller, N.; Nargang, T.; Helmer, D.; Sachsenheimer, K.; Schäfer, M.; Worgull, M.; Greiner, C.; Richter, C.; Rapp, B.
2016. Advanced materials, 28 (23), 4646–4650. doi:10.1002/adma.201506089
2015
Bio-inspired scale-like surface textures and their tribological properties
Schaefer, M.; Greiner, C.
2015. Bioinspiration & biomimetics, 10 (4), Art.Nr.:044001. doi:10.1088/1748-3190/10/4/044001
Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient
Greiner, C.; Merz, T.; Braun, D.; Codrignani, A.; Magagnato, F.
2015. Surface topography, 3 (4). doi:10.1088/2051-672X/3/4/044001
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032
2014
Contact Splitting and the Effect of Dimple Depth on Static Friction of Textured Surfaces
Greiner, C.; Schäfer, M.; Popp, U.; Gumbsch, P.
2014. ACS Applied Materials & Interfaces, 6 (11), 7986–7990. doi:10.1021/am500879m
Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
Braun, D.; Greiner, C.; Schneider, J.; Gumbsch, P.
2014. Tribology International, 77, 142–147. doi:10.1016/j.triboint.2014.04.012
A Phase-Field Approach for Wetting Phenomena of Multiphase Droplets on Solid Surfaces
Ben Said, M.; Selzer, M.; Nestler, B.; Braun, D.; Greiner, C.; Garcke, H.
2014. Langmuir, 30 (14), 4033–4039. doi:10.1021/la500312q
2012
Controlling Nanoscale Friction through the Competition between Capillary Adsorption and Thermally Activated Sliding
Greiner, C.; Felts, J. R.; Dai, Z.; King, W. P.; Carpick, R. W.
2012. ACS Nano, 6 (5), 4305–4313. doi:10.1021/nn300869w
2010
Bioinspired fibrillar adhesives
Boesel, L. F.; Greiner, C.; Arzt, E.; Campo, A. del
2010. Advanced materials, 22 (19), 2125–2137
Bio-inspired deposition of TiO2 thin films induced by hydrophobines
Santhiya, D.; Burkhard, Z.; Greiner, C.; Juergens, L. P. H.; Aken, P. A. van; Bill, J.
2010. Langmuir, 26 (9), 6494–6502. doi:10.1021/la9039557
Temperature dependence of nanoscale friction investigated with thermal AFM probes
Greiner, C.; Felts, J.; Dai, Z.; King, W. P.; Carpick, R. W.
2010. Mechanochemistry in materials science : November 30 - December 4, 2009, Boston, Massachussetts, USA, 13–20, Curran
Local nanoscale heating modulates single-asperity friction
Greiner, C.; Felts, J.; Dai, Z.; King, W. P.; Carpick, R. W.
2010. Nano Letters, 10 (11), 4640–4645. doi:10.1021/nl102809k
2009
Adhesion design maps for fibrillar adhesives: The effect of shape
Greiner, C.; Spolenak, R.; Arzt, E.
2009. Acta Biomaterialia, 5 (2), 597–606
Experimental Parameters Controlling Adhesion of Biomimetic Fibrillar Surfaces
Greiner, C.; Buhl, S.; Campo, A. del; Arzt, E.
2009. The Journal of Adhesion, 85 (9), 646–661
Humidity influence on the adhesion of biomimetic fibrillar surfaces
Buhl, S.; Greiner, C.; Campo, A. del; Arzt, E.
2009. The International Journal of Materials Research, 100 (8), 1119–1126
Hierarchical Gecko-Like Adhesives
Greiner, C.; Arzt, E.; Campo, A. del
2009. Advanced Materials, 21 (4), 479–482
2008
A Gecko-Inspired Reversible Adhesive
Northern, M. T.; Greiner, C.; Arzt, E.; Turner, K. L.
2008. Advanced Materials, 20 (20), 3905–3909
2007
Gecko-Inspired Nanomaterials
Greiner, C.
2007. Bio-mimetic and Bio-inspired Nanomaterials for Life Sciences, Wiley-VCH Verlag. doi:10.1002/9783527610419.ntls0203
A hierarchical gecko-inspired switchable adhesive
Northen, M. T.; Turner, K. L.; Greiner, C.; Arzt, E.
2007. Proceedings of the Hilton Head 2006 - A Solid State Sensors, Actuators and Microsystems Workshop, Hilton Head Island, SC, USA, June 4 - 8, 2006; 1 CD-Rom, 43–46, Transducer Research Foundation
Adhesion of Bioinspired Micropatterned Surfaces: Effects of Pillar Radius, Aspect Ratio, and Preload
Greiner, C.; Campo, A. del; Arzt, E.
2007. Langmuir, 23 (7), 3495–3502
SU-8: A photoresist for high-aspect-ratio and 3D submicron lithography
Campo, A. del; Greiner, C.
2007. Journal of Micromechanics and Microengineering, 17 (6), R81-R95
Designing model systems for enhanced adhesion
Chan, E. P.; Greiner, C.; Arzt, E.; Crosby, A. J.
2007. MRS Bulletin, 32 (6), 496–503
Patterned Surfaces with Pillars with Controlled 3D Tip Geometry Mimicking Bioattachment Devices
Campo, A. del; Greiner, C.; Alvarez, I.; Arzt, E.
2007. Advanced Materials, 19 (15), 1973–1977
Contact Shape Controls Adhesion of Bioinspired Fibrillar Surfaces
Campo, A. del; Greiner, C.; Arzt, E.
2007. Langmuir, 23 (20), 10235–10243
2006
Polymeric structured surfaces for adhesion enhancement
Greiner, C.; Arzt, E.; Campo, A. del
2006. Proceedings of the 29th Annual Meeting of the Adhesion Society, Inc., Jacksonville, Florida, USA, February 19 - 22, 2006. Ed.: Gregory Anderson, 319–338, Adhesion Society
2005
High strength, low stiffness, porous NiTi with superelastic properties
Greiner, C.; Oppenheimer, S. M.; Dunand, D. C.
2005. Acta Biomaterialia, 1 (6), 705–716
Veröffentlichungen
Titel Autor Quelle
SU-8: A photoresist for high-aspect-ratio and 3D submicron lithography

A. del Campo, C. Greiner

Journal of Micromechanics and Microengineering, 17(6), R81-R95 (2007)
Contact shape controls adhesion of bioinspired fibrillar surfaces

A. del Campo, C. Greiner, E. Arzt

Langmuir, 23 (20), 10235-10243 (2007)
Patterned surfaces with pillars with 3D tip geometry mimicking bioattachment devices

A. del Campo, C. Greiner, I. Alvarez, E. Arzt

Advanced Materials, 19(15), 1973-1977 (2007)
Adhesion of bioinspired micropatterned surfaces: Effects of pillar radius, aspect ratio, and preload

C. Greiner, A. del Campo, E. Arzt

Langmuir, 23 (7), 3495-3502 (2007)
Hierachical gecko-like adhesives

C. Greiner, E. Arzt, A. del Campo

Advanced Materials, 21 (4), 479-482 (2009)
Locale nanoscale heating modulates single-asperity friction

C. Greiner, J. Felts, Z. Dai, W. P. King, R. W. Carpick

Nano Letters, 10 (11) 4640-4645 (2010)
Temperature dependence of nanoscale friction investigated with thermal AFM probes

C. Greiner, J. Felts, Z. Dai, W. P. King, R. W. Carpick

Mater. Res. Soc. Symp. Proc. Vol. 1226, 1226-II05-02 (2010)
Adhesion design maps for fibrillar systems: The effect of shape

C. Greiner, R. Spolenak, E. Arzt

Acta Biomaterialia, 5 (2), 597-606 (2009)
Important experimental parameters when measuring adhesion on structured elastomer surfaces

C. Greiner, S. Buhl, A. del Campo, E. Arzt

The Journal of Adhesion, 85 (9), 646-661 (2009)
 
Polymeric structured surfaces for adhesion enhancement

C. Greiner, E. Arzt, A. del Campo

Proceedings of the 29th Annual Meeting of The Adhesion Society, (Jacksonville, Florida), p. 318 (2006)
Controlling Nanoscale Friction through the Competition between Capillary Adsorption and Thermally Activated Sliding

C. Greiner, J.R. Felts, Z. Dai,
W.P. King, R.W. Carpick

ACS Nano, Band 6, Seiten 4305-4313
(2012)
High strength, low stiffness, porous NiTi with superelastic properties

C. Greiner, S.M. Oppenheimer, D.C. Dunand

Acta Biomaterialia, 1 (6), 705-716 (2005)
Bio-inspired deposition of TiO2 thin films induced by hydrophobines

D. Santhiya, Z. Burkhard, C. Greiner, L.P.H. Juergens, P.A. van Aken, J. Bill

Langmuir, 26 (9), 6494-6502 (2010)
Designing model systems for enhanced adhesion

E.P. Chan, C. Greiner, E. Arzt, A. J. Crosby

MRS Bulletin, 32 (6), 496-503 (2007)
Bioinspired fibrillar adhesives

L. F. Boesel, C. Greiner, E. Arzt, A. del Campo

Advanced Materials, 22 (19), 2125-2137 (2010)
Hierarchical gecko-inspired switchable adhesive

M. T. Northen, K. L. Turner, C. Greiner, E. Arzt

A Solid-State Sensor, Actuator, and Microsystems Workshop, (Hilton Head, SC), pp. 43-46 (2006)
A gecko-inspired reversible adhesive

M. T. Northern, C. Greiner, E. Arzt, K. L. Turner

Advanced Materials, 20 (20), 3905-3909 (2008)
Humidity influence on the adhesion of microstructured elastomer surfaces

S. Buhl, C. Greiner, A. del Campo, E. Arzt

The International Journal of Materials Research, 100 (8) 1119-1126 (2009)
Buchbeiträge
Titel Quelle
Gecko-inspired Nanomaterials

book series Nanomaterials for the Life Sciences, volume 7, Bio-mimetic and Bio-inspired Nanomaterials for Life Sciences published by Wiley-VCH

Weitere Informationen zur Nachwuchsgruppe hier