Publications

Enhancement of polyurea grease performance through graphene oxide-functionalized polyurea thickeners: A novel hydrogen-bond network approach
Ren, G.; Zhou, C.; Fan, X.; Dienwiebel, M.; Wang, S.; Li, Y.
2025. Tribology International, 201, 110123. doi:10.1016/j.triboint.2024.110123

Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation
Zhou, Q.; Jiao, Z.; Huang, Z.; Shi, Y.; Li, Y.; Yin, C.; Wang, H.; Pinto, H. C.; Greiner, C.; Liu, W.
2024. Acta Materialia, 279, 120299. doi:10.1016/j.actamat.2024.120299

Premature Damage in Bearing Steel in Relation with Residual Stresses and Hydrogen Trapping
Baur, M.; Khader, I.; Kürten, D.; Schieß, T.; Kailer, A.; Dienwiebel, M.
2024. Lubricants, 12 (9), 311. doi:10.3390/lubricants12090311

Combining simulation and experimental data via surrogate modelling of continuum dislocation dynamics simulations
Katzer, B.; Betsche, D.; von Hoegen, F.; Jochum, B.; Böhm, K.; Schulz, K.
2024. Modelling and Simulation in Materials Science and Engineering, 32 (5), Art.-Nr.: 055026. doi:10.1088/1361-651X/ad4b4c

Applications of Machine Learning in Materials Science. PhD dissertation
Zhao, Y.
2024, June 4. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000171281

Deformationszwillinge unter tribologischer Last. PhD dissertation
Dollmann, A.
2024, May 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000170908

Up- and Down- Conversion in Rare Earth-Doped Fluoride Crystalline Materials for Photovoltaic Applications. PhD dissertation
Madirov, E.
2024, May 29. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000170833

Probing FCC-ee energy calibration through resonant depolarization at KARA
Zimmermann, F.; Keintzel, J.; Müller, A.-S.; Haerer, B.; Blomley, E.; Steinmann, J. L.; Gethmann, J.; Ruprecht, R.; Huttel, E.; Pieloni, T.; Wu, Y.
2024. 15th International Particle Accelerator Conference, Nashville, Tennessee : May 19-24, 2024, Nashville, Tennessee, USA : proceedings. Ed.: F. Pilat, 2516–2519, JACoW Publishing. doi:10.18429/JACoW-IPAC2024-WEPR20

Topology and evolution of dislocation structures mediated by glissile reactions in face-centered cubic metals
Wang, F.; Guo, J.; Weygand, D.; Wang, F.; Rupert, T. J.; Chen, D.; Gianola, D. S.
2024. Acta Materialia, 268, 119748. doi:10.1016/j.actamat.2024.119748

Self-Cleaning and Anti-Reflective Microtextured Fluoropolymer Cover Films for Photovoltaics. PhD dissertation
Roslizar, A.
2024, April 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000169736

Automated identification and tracking of deformation twin structures in molecular dynamics simulations
Ehrich, H. J.; Dollmann, A.; Grützmacher, P. G.; Gachot, C.; Eder, S. J.
2024. Computational Materials Science, 236, Art.-Nr.: 112878. doi:10.1016/j.commatsci.2024.112878

Influence of the Phase Fractions on the Formation of Eutectic Colonies: A Large‐Scale Phase‐Field Study
Kellner, M.; Hierl, H.; Nestler, B.
2024. Advanced Engineering Materials, Art.-Nr.: 2301766. doi:10.1002/adem.202301766

A graph database for feature characterization of dislocation networks
Katzer, B.; Betsche, D.; Böhm, K.; Weygand, D.; Schulz, K.
2024. Scripta Materialia, 240, Art.-Nr.: 115841. doi:10.1016/j.scriptamat.2023.115841

Surface Depassivation via B–O Dative Bonds Affects the Friction Performance of B-Doped Carbon Coatings
Peeters, S.; Kuwahara, T.; Härtwig, F.; Makowski, S.; Weihnacht, V.; Lasagni, A. F.; Dienwiebel, M.; Moseler, M.; Moras, G.
2024. ACS Applied Materials & Interfaces. doi:10.1021/acsami.3c18803

Digital twin of a droplet microarray platform: Evaporation behavior for multiple droplets on patterned chips for cell culture
Wu, Y.; Urrutia Gómez, J. E.; Zhang, H.; Wang, F.; Levkin, P. A.; Popova, A. A.; Nestler, B.
2024. Droplet, 3 (1), Art.-Nr. e94. doi:10.1002/dro2.94

Effect of height waviness on the friction behavior of 100Cr6 steel under mixed or hydrodynamic lubrication
Yue, H.; Vaitkunaite, G.; Li, Y.; Schneider, J.; Greiner, C.; Gumbsch, P.
2023. Tribologie und Schmierungstechnik, 70 (eOnly Son…rausgabe 2), 4–8. doi:10.24053/TuS-2023-0040

Bio-inspired white porous polymers fabricated via supercritical CO foaming. PhD dissertation
Borgmann, L. M.
2023, November 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164652

Graphite lubrication mechanism under high mechanical load. PhD dissertation
Morstein, C. E.
2023, November 6. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000163661

A Framework to Generate, Store, and Publish FAIR Data in Experimental Sciences
Garabedian, N.; Bagov, I.; Flachmann, M.; Ye, N.; Meller, M.; Bresser, F.; Greiner, C.
2023. SEMPDS 2023: Posters and Demos at SEMANTiCS 2023 - 19th International Conference on Semantic Systems (SEMANTICS), Leipzig, 20th-22nd September 2023, 5 S., CEUR-WS

Simulative Determination of Effective Mechanical Properties for Digitally Generated Foam Geometries
Reder, M.; Holland-Cunz, J.; Lorson, P.; August, A.; Nestler, B.
2023. Advanced Engineering Materials. doi:10.1002/adem.202300340

Waviness Affects Friction and Abrasive Wear
Li, Y.; Garabedian, N.; Schneider, J.; Greiner, C.
2023. Tribology Letters, 71 (2), Art.-Nr.: 64. doi:10.1007/s11249-023-01736-1

Influence of atmospheres on the friction and wear of cast iron against chromium plated steel at high temperatures
König, T.; Kimpel, T.; Kürten, D.; Kailer, A.; Dienwiebel, M.
2023. Wear, 522, 204695. doi:10.1016/j.wear.2023.204695

An improved grand-potential phase-field model of solid-state sintering for many particles
Seiz, M.; Hierl, H.; Nestler, B.
2023. Modelling and Simulation in Materials Science and Engineering, 31 (5), Art.-Nr.: 055006. doi:10.1088/1361-651X/acd56d

Temporal sequence of deformation twinning in CoCrNi under tribological load
Dollmann, A.; Rau, J. S.; Bieber, B.; Mantha, L.; Kübel, C.; Kauffmann, A.; Tirunilai, A. S.; Heilmaier, M.; Greiner, C.
2023. Scripta Materialia, 229, Art.-Nr.: 115378. doi:10.1016/j.scriptamat.2023.115378

Qualitative Dissolution Modeling of Etch‐Pit Formation on the K‐Feldspar Surface Through Phase‐Field Approach
Kumar, A.; Prajapati, N.; Späth, M.; Busch, B.; Schneider, D.; Hilgers, C.; Nestler, B.
2023. Journal of Geophysical Research: Solid Earth, 128 (4), e2022JB025749. doi:10.1029/2022JB025749

Multiwall Carbon Nanotubes for Solid Lubrication of Highly Loaded Contacts
MacLucas, T.; Klemenz, A.; Grünewald, P.; Presser, V.; Mayrhofer, L.; Moras, G.; Suarez, S.; Dienwiebel, M.; Mücklich, F.; Moseler, M.
2023. ACS Applied Nano Materials, 6 (3), 1755–1769. doi:10.1021/acsanm.2c04729

Asymptotic analysis of multi-phase-field models: A thorough consideration of junctions
Nani, E. S.; Nestler, B.
2023. Physical Review E, 107 (2), Art.-Nr.: 024803. doi:10.1103/PhysRevE.107.024803

Classification of slip system interaction in microwires under torsion
Zoller, K.; Gruber, P.; Ziemann, M.; Görtz, A.; Gumbsch, P.; Schulz, K.
2023. Computational Materials Science, 216, Art.-Nr.: 111839. doi:10.1016/j.commatsci.2022.111839

Vom Labor in die digitale Welt
Holland-Cunz, J.; Laqua, M.; Wagner, F. N. P. H.; August, A.; Nestler, B.
2023. Forschung aktuell / Hochschule Karlsruhe

Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo
Kellner, M.; Schulz, C.; Kauffmann, A.; Heilmaier, M.; Nestler, B.
2023. Crystals, 13 (7), Article no: 1046. doi:10.3390/cryst13071046

State-of-the-art review of porous polymer membrane formation characterization—How numerical and experimental approaches dovetail to drive innovation
Bohr, S. J.; Wang, F.; Metze, M.; Vukušić, J. L.; Sapalidis, A.; Ulbricht, M.; Nestler, B.; Barbe, S.
2023. Frontiers in Sustainability, 4, Art.-Nr.: 1093911. doi:10.3389/frsus.2023.1093911

Entwicklung und Charakterisierung von Siliziumnitrid-/Siliziumkarbidkompositen für den Einsatz in tribologisch hochbeanspruchten Gleitsystemen. PhD dissertation
Zielonka, P. S.
2023. doi:10.5445/KSP/1000153717

Tribologisch induzierte Verformungsmechanismen und Reibung in Abhängigkeit von der Kristallorientierung in Kupfer. PhD dissertation
Haug, C.
2022, December 16. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000153464

Effect of rigid body motion in phase-field models of solid-state sintering
Seiz, M.
2022. Computational Materials Science, 215, Article no: 111756. doi:10.1016/j.commatsci.2022.111756

Generating FAIR research data in experimental tribology
Garabedian, N. T.; Schreiber, P. J.; Brandt, N.; Zschumme, P.; Blatter, I. L.; Dollmann, A.; Haug, C.; Kümmel, D.; Li, Y.; Meyer, F.; Morstein, C. E.; Rau, J. S.; Weber, M.; Schneider, J.; Gumbsch, P.; Selzer, M.; Greiner, C.
2022. Scientific Data, 9 (1), Art.Nr. 315. doi:10.1038/s41597-022-01429-9

Identification of dislocation reaction kinetics in complex dislocation networks for continuum modelling using data-driven methods
Katzer, B.; Zoller, K.; Weygand, D.; Schulz, K.
2022. Journal of the Mechanics and Physics of Solids, 168, Art.-Nr.: 105042. doi:10.1016/j.jmps.2022.105042

Outstanding Bio-Tribological Performance Induced by the Synergistic Effect of 2D Diamond Nanosheet Coating and Silk Fibroin
Chen, H.; Cai, T.; Ruan, X.; Jiao, C.; Xia, J.; Wei, X.; Wang, Y.; Gong, P.; Li, H.; Atkin, R.; Yin, G.; Zhou, X.; Nishimura, K.; Rosenkranz, A.; Greiner, C.; Wang, B.; Yu, J.; Jiang, N.
2022. ACS Applied Materials and Interfaces, 14 (42), 48091–48105. doi:10.1021/acsami.2c12552

A phase‐field based model for coupling two‐phase flow with the motion of immersed rigid bodies
Reder, M.; Hoffrogge, P. W.; Schneider, D.; Nestler, B.
2022. International Journal for Numerical Methods in Engineering, 123 (16), 3757–3780. doi:10.1002/nme.6988

An Empirical Evaluation of Constrained Feature Selection
Bach, J.; Zoller, K.; Trittenbach, H.; Schulz, K.; Böhm, K.
2022. SN Computer Science, 3 (6), Art.-Nr.: 445. doi:10.1007/s42979-022-01338-z

Role of Nitrogen and Yttrium Contents in Manufacturing (Cr, Y)Nx Film Nanostructures
Apolinario, R. C.; Rodrigues, A. M.; Avila, P. R. T.; Pereira, J. N.; Ramirez, C. A. O.; Daum, P.; Costa, F. P. da; Lira, H. de L.; Neves, G. de A.; Greiner, C.; Pinto, H. C.
2022. Nanomaterials, 12 (14), Art.Nr.: 2410. doi:10.3390/nano12142410

Nonequilibrium plastic roughening of metallic glasses yields self-affine topographies with strain-rate and temperature-dependent scaling exponents
Nöhring, W. G.; Hinkle, A. R.; Pastewka, L.
2022. Physical Review Materials, 6 (7), Art.-Nr.: 075603. doi:10.1103/PhysRevMaterials.6.075603

Electrostatic treatment of charged interfaces in classical atomistic simulations
Tao, C.; Mutter, D.; Urban, D. F.; Elsässer, C.
2022. Modelling and Simulation in Materials Science and Engineering, 30 (5), 055004. doi:10.1088/1361-651X/ac6e79

Entwicklung und Charakterisierung von Siliziumnitrid-/Siliziumkarbidkompositen für den Einsatz in tribologisch hochbeanspruchten Gleitsystemen. PhD dissertation
Zielonka, P. S.
2022, July 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000148109

Materialwissenschaft um Luftlöcher
Holland-Cunz, J.; August, A.; Reder, M.; Nestler, B.
2022. Forschung aktuell, 2022 (Juni), 16–19

3D modeling and experimental investigation on the damage behavior of an interpenetrating metal ceramic composite (IMCC) under compression
Schukraft, J.; Horny, D.; Schulz, K.; Weidenmann, K. A.
2022. Materials Science and Engineering: A, 844, Art.-Nr.: 143147. doi:10.1016/j.msea.2022.143147

Height-Averaged Navier–Stokes Solver for Hydrodynamic Lubrication
Holey, H.; Codrignani, A.; Gumbsch, P.; Pastewka, L.
2022. Tribology Letters, 70 (2), 36. doi:10.1007/s11249-022-01576-5

Untersuchung tribochemischer Adsorptionsprozesse von Schmierstoffadditiven und ihrer synergetischen Wechselwirkungen. PhD dissertation
Eickworth, J.
2022, May 6. Fraunhofer Verlag

Analysis of interpenetrating metal ceramic composite structures using an enhanced random sequential absorption microstructure generation algorithm
Horny, D.; Schulz, K.
2022. Journal of Materials Science, 57 (19), 8869–8889. doi:10.1007/s10853-022-07180-1

Dislocation structure analysis in the strain gradient of torsion loading: a comparison between modelling and experiment
Stricker, M.; Ziemann, M.; Walter, M.; Weygand, S. M.; Gruber, P.; Weygand, D.
2022. Modelling and simulation in materials science and engineering, 30 (3), Art.Nr.: 035007. doi:10.1088/1361-651X/ac4d77

Tight Coupling of Surface and In-Plant Biochemistry and Convection Governs Key Fine Particulate Components over the Amazon Rainforest
Shrivastava, M.; Rasool, Q. Z.; Zhao, B.; Octaviani, M.; Zaveri, R. A.; Zelenyuk, A.; Gaudet, B.; Liu, Y.; Shilling, J. E.; Schneider, J.; Schulz, C.; Zöger, M.; Martin, S. T.; Ye, J.; Guenther, A.; Souza, R. F.; Wendisch, M.; Pöschl, U.
2022. ACS earth and space chemistry, 6 (2), 380–390. doi:10.1021/acsearthspacechem.1c00356

High entropy alloys with hexagonal close-packed structure derived from thin film combinatorial approach
Ter-Isahakyan, A.; Rau, J. S.; Balk, T. J.
2022. Journal of alloys and compounds, 893, 162293. doi:10.1016/j.jallcom.2021.162293

Managing FAIR Tribological Data Using Kadi4Mat
Brandt, N.; Garabedian, N. T.; Schoof, E.; Schreiber, P. J.; Zschumme, P.; Greiner, C.; Selzer, M.
2022. Data, 7 (2), Art.-Nr. 15. doi:10.3390/data7020015

Humidity-dependent lubrication of highly loaded contacts by graphite and a structural transition to turbostratic carbon
Morstein, C. E.; Klemenz, A.; Dienwiebel, M.; Moseler, M.
2022. Nature Communications, 13 (1), Art.Nr. 5958. doi:10.1038/s41467-022-33481-9

Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Srinivasan Tirunilai, A.; Mantha, L. S.; Kübel, C.; Eder, S. J.; Schneider, J.; Greiner, C.
2022. Journal of Materials Science, 57, 17448–17461. doi:10.1007/s10853-022-07661-3

Replicative manufacturing of metal moulds for low surface roughness polymer replication
Kluck, S.; Hambitzer, L.; Luitz, M.; Mader, M.; Sanjaya, M.; Balster, A.; Milich, M.; Greiner, C.; Kotz-Helmer, F.; Rapp, B. E.
2022. Nature Communications, 13 (1), Art.-Nr.: 5048. doi:10.1038/s41467-022-32767-2

Tribological mechanisms of slurry abrasive wear
Li, Y.; Schreiber, P.; Schneider, J.; Greiner, C.
2022. Friction, 11 (6), 1079–1093. doi:10.1007/s40544-022-0654-1

Tailoring the Hybrid Magnetron Sputtering Process (HiPIMS and dcMS) to Manufacture Ceramic Multilayers: Powering Conditions, Target Materials, and Base Layers
de Castilho, B. C. N. M.; de Sousa Mazuco, F.; Rodrigues, A. M.; Avila, P. R. T.; Apolinario, R. C.; Daum, P.; da Costa, F. P.; Menezes, R. R.; de Araújo Neves, G.; Greiner, C.; Pinto, H. C.
2022. Nanomaterials, 12 (14), Art.-Nr.: 2465. doi:10.3390/nano12142465

Programmable gear-based mechanical metamaterials
Fang, X.; Wen, J.; Cheng, L.; Yu, D.; Zhang, H.; Gumbsch, P.
2022. Nature Materials, 21 (8), 869–876. doi:10.1038/s41563-022-01269-3

A wear-resistant metastable CoCrNiCu high-entropy alloy with modulated surface and subsurface structures
Ren, Y.; Jia, Q.; Du, Y.; Zhou, Q.; Greiner, C.; Hua, K.; Wang, H.; Wang, J.
2022. Friction, 10 (10), 1722–1738. doi:10.1007/s40544-022-0606-9

Determination of constitutive friction laws appropriate for simulation of cutting processes
Schulze, V.; Bleicher, F.; Courbon, C.; Gerstenmeyer, M.; Meier, L.; Philipp, J.; Rech, J.; Schneider, J.; Segebade, E.; Steininger, A.; Wegener, K.
2022. CIRP Journal of Manufacturing Science and Technology, 38, 139–158. doi:10.1016/j.cirpj.2022.04.008

A Two-Dimensional Phase-Field Investigation on Unidirectionally Solidified Tip-Splitting Microstructures
Laxmipathy, V. P.; Wang, F.; Selzer, M.; Nestler, B.
2022. Metals, 12 (3), Art.-Nr.: 376. doi:10.3390/met12030376

Role of orientation relationship for the formation of morphology and preferred orientation in NiAl-(Cr,Mo) during directional solidification
Schulz, C.; Kauffmann, A.; Laube, S.; Kellner, M.; Nestler, B.; Heilmaier, M.
2022. Acta Materialia, 231, Art.Nr. 117857. doi:10.1016/j.actamat.2022.117857

Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models
Durmaz, A. R.; Natkowski, E.; Arnaudov, N.; Sonnweber-Ribic, P.; Weihe, S.; Münstermann, S.; Eberl, C.; Gumbsch, P.
2022. International Journal of Fatigue, 160, Art.-Nr.: 106824. doi:10.1016/j.ijfatigue.2022.106824

Explainable Artificial Intelligence for Mechanics: Physics-Explaining Neural Networks for Constitutive Models
Koeppe, A.; Bamer, F.; Selzer, M.; Nestler, B.; Markert, B.
2022. Frontiers in Materials, 8, Art.-Nr.: 824958. doi:10.3389/fmats.2021.824958

Efficient Exploration of Microstructure-Property Spaces via Active Learning
Morand, L.; Link, N.; Iraki, T.; Dornheim, J.; Helm, D.
2022. Frontiers in Materials, 8, Art.-Nr.: 824441. doi:10.3389/fmats.2021.824441

Machine Learning Assisted Design of Experiments for Solid State Electrolyte Lithium Aluminum Titanium Phosphate
Zhao, Y.; Schiffmann, N.; Koeppe, A.; Brandt, N.; Bucharsky, E. C.; Schell, K. G.; Selzer, M.; Nestler, B.
2022. Frontiers in Materials, 9, Art.-Nr.: 821817. doi:10.3389/fmats.2022.821817

Asymptotic analysis of multi-phase-field models: A thorough consideration of binary interfaces
Nani, E. S.; Nestler, B.
2022. Physical Review E, 105 (1), Art.-Nr.: 014802. doi:10.1103/PhysRevE.105.014802

Rotating Directional Solidification of Ternary Eutectic Microstructures in Bi-In-Sn: A Phase-Field Study
Noubary, K. D.; Kellner, M.; Nestler, B.
2022. Materials, 15 (3), Art.-Nr.: 1160. doi:10.3390/ma15031160

Two-dimensional buckling structure induces the ultra-low thermal conductivity: a comparative study of the group GaX (X = N, P, As)
Shen, C.; Hadaeghi, N.; Singh, H. K.; Long, T.; Fan, L.; Qin, G.; Zhang, H.
2022. Journal of materials chemistry / C, 10 (4), 1436–1444. doi:10.1039/d1tc04531h

Gibbs energy and phase-field modeling of ferromagnetic ferrite (α)→ paramagnetic austenite (γ) transformation in Fe–C alloys under an external magnetic field
Zeng, Y.; Mittnacht, T.; Werner, W.; Du, Y.; Schneider, D.; Nestler, B.
2022. Acta Materialia, 225, Art.-Nr.: 117595. doi:10.1016/j.actamat.2021.117595

The role of dissipation regarding the concept of purely mechanical theories in plasticity
Prahs, A.; Böhlke, T.
2022. Mechanics research communications, 119, Art.-Nr. 103832. doi:10.1016/j.mechrescom.2021.103832

Tribologically induced crystal rotation kinematics revealed by electron backscatter diffraction
Haug, C.; Molodov, D.; Gumbsch, P.; Greiner, C.
2022. Acta Materialia, 225, Art.-Nr.: 117566. doi:10.1016/j.actamat.2021.117566

Modellfreies Lernen optimaler zeitdiskreter Regelungsstrategien für Fertigungsprozesse mit endlichem Zeithorizont. PhD dissertation
Dornheim, J.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000141283

Equilibrium droplet shapes on chemically patterned surfaces: theoretical calculation, phase-field simulation, and experiments
Wu, Y.; Kuzina, M.; Wang, F.; Reischl, M.; Selzer, M.; Nestler, B.; Levkin, P. A.
2022. Journal of Colloid and Interface Science, 606, 1077–1086. doi:10.1016/j.jcis.2021.08.029

Mechanische und Strömungsmechanische Topologieoptimierung mit der Phasenfeldmethode. PhD dissertation
Selzer, M.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000049503

Melt-Extrusion-Based Additive Manufacturing of Transparent Fused Silica Glass
Mader, M.; Hambitzer, L.; Schlautmann, P.; Jenne, S.; Greiner, C.; Hirth, F.; Helmer, D.; Kotz-Helmer, F.; Rapp, B. E.
2021. Advanced Science, 8 (23), Art.-Nr. 2103180. doi:10.1002/advs.202103180

3D printing of inherently nanoporous polymers via polymerization-induced phase separation
Dong, Z.; Cui, H.; Zhang, H.; Wang, F.; Zhan, X.; Mayer, F.; Nestler, B.; Wegener, M.; Levkin, P. A.
2021. Nature Communications, 12 (1), Art:nr. 247. doi:10.1038/s41467-020-20498-1

Some Implications of Constraints in Phasefield Models. PhD dissertation
Reiter, A.
2021, November 16. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000139899

Droplet wetting on chemically and mechanically structured surfaces. PhD dissertation
Wu, Y.
2021, November 9. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000139649

Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films
Luo, D.; Zhou, Q.; Ye, W.; Ren, Y.; Greiner, C.; He, Y.; Wang, H.
2021. ACS Applied Materials and Interfaces, 13 (46), 55712–55725. doi:10.1021/acsami.1c16949

Efficient Experimental and Data-Centered Workflow for Microstructure-Based Fatigue Data – Towards a Data Basis for Predictive AI Models
Durmaz, A. R.; Hadzic, N.; Straub, T.; Eberl, C.; Gumbsch, P.
2021. Experimental mechanics, 61 (9), 1489–1502. doi:10.1007/s11340-021-00758-x

Numerische Untersuchung von mechanischen und thermischen Eigenschaften von Gusseisen mit Lamellengraphit. PhD dissertation
Herrmann, C. J.
2021, October 27. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000139258

Correlation of wear behaviour and microstructural evolution in Mg–Zn–Y alloys with long-period stacking ordered phase
Takagi, K.; Hashamova, E.; Dienwiebel, M.; Mine, Y.; Takashima, K.
2021. Wear, 482–483, Art. Nr.: 203983. doi:10.1016/j.wear.2021.203983

A Probabilistic Model for Forging Flaw Crack Nucleation Processes
Radaelli, F.; Amann, C.; Aydin, A.; Varfolomeev, I.; Gumbsch, P.; Kadau, K.
2021. Journal of engineering for gas turbines and power, 143 (10), 101012. doi:10.1115/1.4051426

Kinematics of Crystal Growth in Single‐Seal Syntaxial Veins in Limestone ‐ A Phase‐Field Study
Späth, M.; Spruženiece, L.; Urai, J. L.; Selzer, M.; Arndt, M.; Nestler, B.
2021. Journal of geophysical research / Solid earth, 126 (10), e2021JB022106. doi:10.1029/2021JB022106

Modelling and experimental validation of material deformation at different zones of welded structural-steel under multiaxial loading
Hemmesi, K.; Holey, H.; Elmoghazy, A.; Böhm, R.; Farajian, M.; Schulze, V.
2021. Materials Science and Engineering A, 824, Art.-Nr.: 140826. doi:10.1016/j.msea.2021.140826

The effect of electrochemically inactive Ti substituted for Ru in Li2Ru1-Ti O3 on structure and electrochemical performance
Yao, Y.; Zhang, L.; Sigel, F.; Schwarz, B.; Ehrenberg, H.; Chen, G.; Du, F.; Wang, C.
2021. Journal of Energy Chemistry, 60, 222–228. doi:10.1016/j.jechem.2020.12.037

Simulating mechanical wave propagation within the framework of phase-field modelling
Liu, X.; Schneider, D.; Daubner, S.; Nestler, B.
2021. Computer methods in applied mechanics and engineering, 381, Article: 113842. doi:10.1016/j.cma.2021.113842

Phase-field formulation of a fictitious domain method for particulate flows interacting with complex and evolving geometries
Reder, M.; Schneider, D.; Wang, F.; Daubner, S.; Nestler, B.
2021. International Journal for Numerical Methods in Fluids, 93 (8), 2486–2507. doi:10.1002/fld.4984

Graphite Lubrication Mechanisms Under High Mechanical Load
Morstein, C. E.; Dienwiebel, M.
2021. Wear, 477, Art. Nr.: 203794. doi:10.1016/j.wear.2021.203794

A numerical approach for the determination of graphite deformation behaviour by using microtribological pressure tests
Joerger, A.; Morstein, C.; Dienwiebel, M.; Albers, A.
2021. Wear, 476, Art.-Nr.: 203652. doi:10.1016/j.wear.2021.203652

Modellfreies Lernen optimaler zeitdiskreter Regelungsstrategien für Fertigungsprozesse mit endlichem Zeithorizont. PhD dissertation
Dornheim, J.
2021, July 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000135079

Achieving Ultra-Low Friction with Diamond/Metal Systems in Extreme Environments
Stoyanov, P.; Merz, R.; Stricker, M.; Kopnarski, M.; Dienwiebel, M.
2021. Materials, 14 (14), 3791. doi:10.3390/ma14143791

Phase-field modeling of unidirectionally solidified microstructures under diffusive-convective regime. PhD dissertation
Veluvali, P. L.
2021, July 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134624

Correction to: A phase-field study on polymerization-induced phase separation occasioned by diffusion and capillary flow—a mechanism for the formation of porous microstructures in membranes
Wang, F.; Ratke, L.; Zhang, H.; Altschuh, P.; Nestler, B.
2021. Journal of sol gel science and technology, 99 (1), 273. doi:10.1007/s10971-021-05565-3

Morphological stability of three-dimensional cementite rods in polycrystalline system : A phase-field analysis
Mittnacht, T.; Kubendran Amos, P. G.; Schneider, D.; Nestler, B.
2021. Journal of materials science & technology, 77, 252–268. doi:10.1016/j.jmst.2020.11.019

Some refinements in the phase-field and sharp interface treatments of eutectic growth. PhD dissertation
Enugala, S. N.
2021, June 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134170

Wide-blocky veins explained by dependency of crystal growth rate on fracture surface type: Insights from phase-field modeling
Spruženiece, L.; Späth, M.; Urai, J. L.; Ukar, E.; Selzer, M.; Nestler, B.
2021. Geology, 49 (6), 641–646. doi:10.1130/G48472.1

Quantitative Phase-Field Modeling of Faceted Crystal Dissolution Processes
Prajapati, N.; Späth, M.; Knecht, L.; Selzer, M.; Nestler, B.
2021. Crystal growth & design, 21 (6), 3266–3279. doi:10.1021/acs.cgd.0c01715

Mechanismen tribologisch-induzierter Oxidation in hochreinem Kupfer. PhD dissertation
Rau, J. S.
2021, March 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000130866

On the origin of microstructural discontinuities in sliding contacts: A discrete dislocation plasticity analysis
Xu, Y.; Ruebeling, F.; Balint, D.; Greiner, C.; Dini, D.
2021. International Journal of Plasticity, 138, Article no: 102942. doi:10.1016/j.ijplas.2021.102942

Formation of wide-blocky calcite veins by extreme growth competition
Spruženiece, L.; Späth, M.; Urai, J. L.; Ukar, E.; Selzer, M.; Nestler, B.; Schwedt, A.
2021. Journal of the Geological Society, 178 (2), jgs2020–104. doi:10.1144/jgs2020-104

Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements
Mangolini, F.; Li, Z.; Marcus, M. A.; Schneider, R.; Dienwiebel, M.
2021. Carbon, 173, 557–564. doi:10.1016/j.carbon.2020.11.021

Kadi4Mat : A Research Data Infrastructure for Materials Science
Brandt, N.; Griem, L.; Herrmann, C.; Schoof, E.; Tosato, G.; Zhao, Y.; Zschumme, P.; Selzer, M.
2021. Data science journal, 20 (1), Art.-Nr.: 8. doi:10.5334/dsj-2021-008

Atomically Architected Silicon Pyramid Single-Crystalline Structure Supporting Epitaxial Material Growth and Characteristic Magnetism
Irmikimov, A.; Pamasi, L. N.; Hattori, A. N.; Higashi, T.; Takahashi, S.; Hashamova, E. E.; Shi, X.; Guo, F.; Hosoito, N.; Osaka, A. I.; Tanaka, H.; Hattori, K.
2021. Crystal growth & design, 21 (2), 946–953. doi:10.1021/acs.cgd.0c01286

Phase-field simulations of grain boundary grooving under diffusive-convective conditions
Laxmipathy, V. P.; Wang, F.; Selzer, M.; Nestler, B.
2021. Acta materialia, 204, Art.-Nr.: 116497. doi:10.1016/j.actamat.2020.116497

Characterization of the Microstructure After Composite Peening of Aluminum
Seitz, M.; Dürrschnabel, M.; Kauffmann, A.; Kurpiers, C.; Greiner, C.; Weidenmann, K. A.
2021. Advanced engineering materials, 23 (2), Art.Nr. 2000575. doi:10.1002/adem.202000575

Normal Load and Counter Body Size Influence the Initiation of Microstructural Discontinuities in Copper during Sliding
Ruebeling, F.; Xu, Y.; Richter, G.; Dini, D.; Gumbsch, P.; Greiner, C.
2021. ACS applied materials & interfaces, 13 (3), 4750–4760. doi:10.1021/acsami.0c19736

Tribologische Analysen eines hochbelasteten Rastmechanismus unter unterschiedlichen kinematischen Bedingungen. PhD dissertation
Schimrosczyk, E.
2021, January 21. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000128472

Phase-field modeling on the diffusion-driven processes in metallic conductors and lithium-ion batteries. PhD dissertation
Santoki, J.
2021, January 13. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000128098

How Tribo-Oxidation Alters the Tribological Properties of Copper and Its Oxides
Lehmann, J. S.; Schwaiger, R.; Rinke, M.; Greiner, C.
2021. Advanced materials interfaces, 8 (1), Art.-Nr.: 2001673. doi:10.1002/admi.202001673

An artificial intelligence approach to model nonlinear continua by intelligent meta‐elements
Koeppe, A.; Bamer, F.; Markert, B.
2021. PAMM, 20 (Special Issue), e202000300. doi:10.1002/pamm.202000300

Workflow concepts to model nonlinear mechanics with computational intelligence
Koeppe, A.; Bamer, F.; Selzer, M.; Nestler, B.; Markert, B.
2021. PAMM, 21 (Special Issue), e202100238. doi:10.1002/pamm.202100238

MoMaF Science Data Center für Molekulare Materialforschung
Altschuh, P.; Bach, F.; Bräse, S.; Hartmann, T.; Jung, N.; Krauß, P.; Nestler, B.; Schiefer, G.; Schreiber, C.; Selzer, M.; Terzijska, D.
2021. E-Science-Tage 2021: Share Your Research Data, Heidelberg, 04.03. - 05.03.2021. doi:10.11588/heidok.00029699

pH-Induced Modulation of Vibrio fischeri Population Life Cycle
Silva, A. R.; Sousa, C.; Exner, D.; Schwaiger, R.; Alves, M. M.; Petrovykh, D. Y.; Pereira, L.
2021. Chemosensors, 9 (10), 283. doi:10.3390/chemosensors9100283

A deep learning approach for complex microstructure inference
Durmaz, A. R.; Müller, M.; Lei, B.; Thomas, A.; Britz, D.; Holm, E. A.; Eberl, C.; Mücklich, F.; Gumbsch, P.
2021. Nature Communications, 12 (1), Art.Nr. 6272. doi:10.1038/s41467-021-26565-5

Computational determination of macroscopic mechanical and thermal material properties for different morphological variants of cast iron
Herrmann, C.; Schmid, S.; Schneider, D.; Selzer, M.; Nestler, B.
2021. Metals, 11 (10), Art. Nr.: 1588. doi:10.3390/met11101588

Calibrating a fiber–matrix interface failure model to single fiber push-out tests and numerical simulations
Rohrmüller, B.; Gumbsch, P.; Hohe, J.
2021. Composites Part A: Applied Science and Manufacturing, 150, Art.-Nr.: 106607. doi:10.1016/j.compositesa.2021.106607

Phase-Field Model for the Simulation of Brittle-Anisotropic and Ductile Crack Propagation in Composite Materials
Herrmann, C.; Schneider, D.; Schoof, E.; Schwab, F.; Nestler, B.
2021. Materials, 14 (17), Art.-Nr.: 4956. doi:10.3390/ma14174956

Atomistic calculations of charged point defects at grain boundaries in SrTi O3
Tao, C.; Mutter, D.; Urban, D. F.; Elsässer, C.
2021. Physical Review B, 104 (5), Art.-Nr.: 054114. doi:10.1103/PhysRevB.104.054114

Phase-field investigation on the peritectic transition in Fe-C system
Cai, Y.; Zhang, Z.; Nestler, B.; Fei, W.
2021. Acta Materialia, 219, Art.-Nr.: 117223. doi:10.1016/j.actamat.2021.117223

Development of a new topographical parameter set for characterizing textured rough surfaces
Yue, H.; Deng, J.; Schneider, J.
2021. Surface Topography: Metrology and Properties, 9 (3), 035013. doi:10.1088/2051-672X/ac1723

Thermodynamic Reassessment of the Au-In Binary System Supported with First-Principles Calculations
Shen, C.; Hu, K.; Fan, L.; Zhang, H.
2021. Journal of Phase Equilibria and Diffusion, 42, 479–488. doi:10.1007/s11669-021-00910-z

Subsurface microstructural evolution during scratch testing on Bcc iron
Linsler, D.; Ruebeling, F.; Greiner, C.
2021. Metals, 11 (8), 1258. doi:10.3390/met11081258

Controlling shear band instability by nanoscale heterogeneities in metallic nanoglasses
Nandam, S. H.; Schwaiger, R.; Kobler, A.; Kübel, C.; Wang, C.; Ivanisenko, Y.; Hahn, H.
2021. Journal of materials research, 36, 2903–2914. doi:10.1557/s43578-021-00285-4

The Force Cone Method Applied to Explain Hidden Whirls in Tribology
Mattheck, C.; Greiner, C.; Bethge, K.; Tesari, I.; Weber, K.
2021. Materials, 14 (14), Art.-Nr. 3894. doi:10.3390/ma14143894

Cyclic Deformation Induced Residual Stress Evolution and 3D Short Fatigue Crack Growth Investigated by Advanced Synchrotron Tomography Techniques
Dönges, B.; Syha, M.; Hüsecken, A. K.; Pietsch, U.; Ludwig, W.; Krupp, U.; Christ, H.-J.
2021. Materials, 14 (6), 1562. doi:10.3390/ma14061562

A review of coated nano- and micro-lattice materials
Garcia-Taormina, A. R.; Alwen, A.; Schwaiger, R.; Hodge, A. M.
2021. Journal of materials research, 36, 3607–3627. doi:10.1557/s43578-021-00178-6

Effect of tortuosity, porosity, and particle size on phase-separation dynamics of ellipsoid-like particles of porous electrodes: Cahn-Hilliard-type phase-field simulations
Santoki, J.; Daubner, S.; Schneider, D.; Kamlah, M.; Nestler, B.
2021. Modelling and simulation in materials science and engineering, 29 (6), Art.Nr. 065010. doi:10.1088/1361-651X/ac11bc

DFT Calculations and Thermodynamic Re-Assessment of the Fe-Y Binary System
Fan, L.; Shen, C.; Hu, K.; Liu, H.; Zhang, H.
2021. Journal of Phase Equilibria and Diffusion, 42, 348–362. doi:10.1007/s11669-021-00887-9

Phase-Field Modeling of Multiple Emulsions Via Spinodal Decomposition
Zhang, H.; Wu, Y.; Wang, F.; Guo, F.; Nestler, B.
2021. Langmuir, 37 (17), 5275–5281. doi:10.1021/acs.langmuir.1c00275

The indentation size effect of single-crystalline tungsten revisited
Wang, J.; Volz, T.; Weygand, S. M.; Schwaiger, R.
2021. Journal of Materials Research, 36, 2166–2175. doi:10.1557/s43578-021-00221-6

Kleine Bausteine mit großer Wirkung
Kneer, A.; August, A.; Wirtz, M.; Herrmann, C.; Schneider, D.; Nestler, B.
2021. Forschung aktuell, 44–51

Multiscale Friction Simulation of Dry Polymer Contacts: Reaching Experimental Length Scales by Coupling Molecular Dynamics and Contact Mechanics
Savio, D.; Hamann, J.; Romero, P. A.; Klingshirn, C.; Bactavatchalou, R.; Dienwiebel, M.; Moseler, M.
2021. Tribology letters, 69 (2), 70. doi:10.1007/s11249-021-01444-8

Tribological Performance of Additively Manufactured AISI H13 Steel in Different Surface Conditions
Guenther, E.; Kahlert, M.; Vollmer, M.; Niendorf, T.; Greiner, C.
2021. Materials, 14 (4), 928. doi:10.3390/ma14040928

Microstructure evolution of compressed micropillars investigated by in situ HR-EBSD analysis and dislocation density simulations
Zoller, K.; Kalácska, S.; Ispánovity, P. D.; Schulz, K.
2021. Comptes rendus physique, 22 (S3), 1–27. doi:10.5802/crphys.55

Lustre I/O performance investigations on Hazel Hen: experiments and heuristics
Seiz, M.; Offenhäuser, P.; Andersson, S.; Hötzer, J.; Hierl, H.; Nestler, B.; Resch, M.
2021. The journal of supercomputing, 77, 12508–12536. doi:10.1007/s11227-021-03730-7

Large characteristic lengths in 3D chiral elastic metamaterials
Frenzel, T.; Hahn, V.; Ziemke, P.; Schneider, J. L. G.; Chen, Y.; Kiefer, P.; Gumbsch, P.; Wegener, M.
2021. Communications materials, 2 (1), Art.Nr. 4. doi:10.1038/s43246-020-00107-w

Multiphase-field model for surface diffusion and attachment kinetics in the grand-potential framework
Hoffrogge, P. W.; Mukherjee, A.; Nani, E. S.; Amos, P. G. K.; Wang, F.; Schneider, D.; Nestler, B.
2021. Physical review / E, 103 (3), Article no: 033307. doi:10.1103/PhysRevE.103.033307

Wetting transition and phase separation on flat substrates and in porous structures
Wang, F.; Nestler, B.
2021. Journal of Chemical Physics, 154 (9), Art.-Nr.: 094704. doi:10.1063/5.0044914

Multiphase-field modeling of spinodal decomposition during intercalation in an Allen-Cahn framework
Daubner, S.; Kubendran Amos, P. G.; Schoof, E.; Santoki, J.; Schneider, D.; Nestler, B.
2021. Physical review materials, 5 (3), Article no: 035406. doi:10.1103/PhysRevMaterials.5.035406

Variations in strain affect friction and microstructure evolution in copper under a reciprocating tribological load
Becker, S.; Schulz, K.; Scherhaufer, D.; Gumbsch, P.; Greiner, C.
2021. Journal of Materials Research, 36, 970–981. doi:10.1557/s43578-020-00050-z

A probabilistic model for forging flaw crack nucleation processes
Radaelli, F.; Amann, C.; Aydin, A.; Varfolomeev, I.; Gumbsch, P.; Kadau, K.
2021. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online. Volume 10B: Structures and Dynamics, GT2020–14606, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2020-14606

Modelling and simulation of the freeze casting process with the phase-field method
Seiz, M.; Nestler, B.
2021. Computational materials science, 193, Art.-Nr.: 110410. doi:10.1016/j.commatsci.2021.110410

Effect of conductivity on the electromigration-induced morphological evolution of islands with high symmetries of surface diffusional anisotropy
Santoki, J.; Mukherjee, A.; Schneider, D.; Nestler, B.
2021. Journal of applied physics, 129 (2), Ar. Nr.: 025110. doi:10.1063/5.0033228

A two-dimensional phase-field study on dendritic growth competition under convective conditions
Laxmipathy, V. P.; Wang, F.; Selzer, M.; Nestler, B.
2021. Computational materials science, 186, Art.-Nr.: 109964. doi:10.1016/j.commatsci.2020.109964

Chemomechanische Modellierung der Wärmebehandlung von Stählen mit der Phasenfeldmethode. PhD dissertation
Schoof, E.
2021. KIT Scientific Publishing. doi:10.5445/KSP/1000123341

Modellierung mehrkomponentiger Materialsysteme für die Phasenfeldmethode und Analyse der simulierten Mikrostrukturen. PhD dissertation
Kellner, M.
2021. KIT Scientific Publishing. doi:10.5445/KSP/1000122989

Grand-potential based phase-field model for systems with interstitial sites
Kubendran Amos, P. G.; Nestler, B.
2020. Scientific reports, 10 (1), Art. Nr. 22423. doi:10.1038/s41598-020-79956-x

Initiale Mikrostrukturentwicklung in Kupfer infolge einer tribologischen Belastung. PhD dissertation
Ruebeling, F. M.
2020, December 11. Karlsruher Institut für Technologie (KIT)

Towards programmable friction: control of lubrication with ionic liquid mixtures by automated electrical regulation
Gatti, F.; Amann, T.; Kailer, A.; Baltes, N.; Rühe, J.; Gumbsch, P.
2020. Scientific reports, 10 (1), Art. Nr.: 17634. doi:10.1038/s41598-020-74709-2

Additive laser barcode printing on high reflective stainless steel
Mihalev, M. S.; Hardalov, C. M.; Christov, C. G.; Rinke, M.; Leiste, H.; Schneider, J.
2020. Acta polytechnica, 60 (5), 435–439. doi:10.14311/AP.2020.60.0435

Aspects on numerical integration of dislocation surface traction fields for discrete dislocation dynamics FEM coupling: the case of emerging dislocations
El Achkar, T.; Weygand, D.
2020. Modelling and simulation in materials science and engineering, 28 (8), Art.Nr. 085010. doi:10.1088/1361-651X/abc04d

Extreme Scale Phase-Field Simulation of Sintering Processes
Hierl, H.; Hötzer, J.; Seiz, M.; Reiter, A.; Nestler, B.
2020. 2019 IEEE/ACM 10th Workshop on Latest Advances in Scalable Algorithms for Large-Scale Systems (ScalA), Denver, CO, USA, 18-18 Nov. 2019, 25–32, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ScalA49573.2019.00009

Repulsion leads to coupled dislocation motion and extended work hardening in bcc metals
Srivastava, K.; Weygand, D.; Caillard, D.; Gumbsch, P.
2020. Nature Communications, 11 (1), Art. Nr.: 5098. doi:10.1038/s41467-020-18774-1

Microstructural transition in monotectic alloys: A phase-field study
Laxmipathy, V. P.; Wang, F.; Selzer, M.; Nestler, B.
2020. International journal of heat and mass transfer, 159, Art.-Nr. 120096. doi:10.1016/j.ijheatmasstransfer.2020.120096

Development of synthetic open porous structures for improved heat transfer
August, A.; Jamshidi, F.; Kneer, A.; Wolf, R. H.; Wirtz, M.; Nestler, B.
2020. International journal of heat and mass transfer, 159, Article No.: 120071. doi:10.1016/j.ijheatmasstransfer.2020.120071

Surface engineering of a titanium alloy for tribological applications by nanosecond-pulsed laser
Kümmel, D.; Linsler, D.; Schneider, R.; Schneider, J.
2020. Tribology international, 150, Article no: 106376. doi:10.1016/j.triboint.2020.106376

Studies of Charm Quark Diffusion inside Jets Using Pb-Pb and pp Collisions at √sNN=5.02  TeV
CMS Collaboration; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Ambrogi, F.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Dragicevic, M.; Erö, J.; Escalante Del Valle, A.; Flechl, M.; Frühwirth, R.; Ghete, V. M.; Hrubec, J.; Jeitler, M.; Krammer, N.; Krätschmer, I.; Liko, D.; Madlener, T.; Mikulec, I.; Rad, N.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Spanring, M.; Spitzbart, D.; Taurok, A.; Waltenberger, W.; Wittmann, J.; Wulz, C.-E.; Zarucki, M.; Chekhovsky, V.; Mossolov, V.; Suarez Gonzalez, J.; De Wolf, E. A.; Di Croce, D.; Janssen, X.; Lauwers, J.; Pieters, M.; Van Haevermaet, H.; Mechelen, P. Van; Van Remortel, N.; Abu Zeid, S.; Blekman, F.; D’Hondt, J.; De Bruyn, I.; De Clercq, J.; Deroover, K.; Flouris, G.; Lontkovskyi, D.; Lowette, S.; Marchesini, I.; Moortgat, S.; Moreels, L.; Python, Q.; Skovpen, K.; Tavernier, S.; Doninck, W. Van; Van Mulders, P.; Van Parijs, I.; Beghin, D.; Bilin, B.; Brun, H.; Clerbaux, B.; De Lentdecker, G.; Delannoy, H.; Dorney, B.; Fasanella, G.; Favart, L.; Goldouzian, R.; Grebenyuk, A.; Kalsi, A. K.; Lenzi, T.; Luetic, J.; Postiau, N.; Starling, E.; Thomas, L.; Vander Velde, C.; Vanlaer, P.; Vannerom, D.; Wang, Q.; Cornelis, T.; Dobur, D.; Fagot, A.; Gul, M.; Khvastunov, I.; Poyraz, D.; Roskas, C.; Trocino, D.; Tytgat, M.; Verbeke, W.; Vermassen, B.; Vit, M.; Zaganidis, N.; Bakhshiansohi, H.; Bondu, O.; Brochet, S.; Bruno, G.; Caputo, C.; David, P.; Delaere, C.; Delcourt, M.; Giammanco, A.; Krintiras, G.; Lemaitre, V.; Magitteri, A.; Mertens, A.; Musich, M.; Piotrzkowski, K.; Saggio, A.; Vidal Marono, M.; Wertz, S.; Zobec, J.; Alves, F. L.; Alves, G. A.; Correa Martins Junior, M.; Correia Silva, G.; Hensel, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Coelho, E.; Costa, E. M. Da; Silveira, G. G. Da; De Jesus Damiao, D.; De Oliveira Martins, C.; Fonseca De Souza, S.; Malbouisson, H.; Matos Figueiredo, D.; Melo De Almeida, M.; Mora Herrera, C.; Mundim, L.; Nogima, H.; Prado Da Silva, W. L.; Sanchez Rosas, L. J.; Santoro, A.; Sznajder, A.; Thiel, M.; Tonelli Manganote, E. J.; Torres Da Silva De Araujo, F.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; Calligaris, L.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Novaes, S. F.; Padula, S. S.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Marinov, A.; Misheva, M.; Rodozov, M.; Shopova, M.; Sultanov, G.; Dimitrov, A.; Litov, L.; Pavlov, B.; Petkov, P.; Fang, W.; Gao, X.; Yuan, L.; Wang, Y.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Chen, Y.; Jiang, C. H.; Leggat, D.; Liao, H.; Liu, Z.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, Z.; Yazgan, E.; Zhang, H.; Zhang, S.; Zhao, J.; Ban, Y.; Chen, G.; Levin, A.; Li, J.; Li, L.; Li, Q.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Carrillo Montoya, C. A.; Chaparro Sierra, L. F.; Florez, C.; González Hernández, C. F.; Segura Delgado, M. A.; Courbon, B.; Godinovic, N.; Lelas, D.; Puljak, I.; Sculac, T.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Ferencek, D.; Kadija, K.; Mesic, B.; Starodumov, A.; Susa, T.; Ather, M. W.; Attikis, A.; Kolosova, M.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Finger, M.; Finger, M.; Ayala, E.; Carrera Jarrin, E.; Ellithi Kamel, A.; Mahmoud, M. A.; Mohammed, Y.; Bhowmik, S.; Carvalho Antunes De Oliveira, A.; Dewanjee, R. K.; Ehataht, K.; Kadastik, M.; Raidal, M.; Veelken, C.; Eerola, P.; Kirschenmann, H.; Pekkanen, J.; Voutilainen, M.; Havukainen, J.; Heikkilä, J. K.; Järvinen, T.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Laurila, S.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Siikonen, H.; Tuominen, E.; Tuominiemi, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Faure, J. L.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Leloup, C.; Locci, E.; Malcles, J.; Negro, G.; Rander, J.; Rosowsky, A.; Sahin, M. Ö.; Titov, M.; Abdulsalam, A.; Amendola, C.; Antropov, I.; Beaudette, F.; Busson, P.; Charlot, C.; Granier de Cassagnac, R.; Kucher, I.; Lobanov, A.; Martin Blanco, J.; Martin Perez, C.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Rembser, J.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Stahl Leiton, A. G.; Zabi, A.; Zghiche, A.; Agram, J.-L.; Andrea, J.; Bloch, D.; Brom, J.-M.; Chabert, E. C.; Cherepanov, V.; Collard, C.; Conte, E.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Jansová, M.; Le Bihan, A.-C.; Tonon, N.; Van Hove, P.; Gadrat, S.; Beauceron, S.; Bernet, C.; Boudoul, G.; Chanon, N.; Chierici, R.; Contardo, D.; Depasse, P.; El Mamouni, H.; Fay, J.; Finco, L.; Gascon, S.; Gouzevitch, M.; Grenier, G.; Ille, B.; Lagarde, F.; Laktineh, I. B.; Lattaud, H.; Lethuillier, M.; Mirabito, L.; Perries, S.; Popov, A.; Sordini, V.; Touquet, G.; Vander Donckt, M.; Viret, S.; Toriashvili, T.; Tsamalaidze, Z.; Autermann, C.; Feld, L.; Kiesel, M. K.; Klein, K.; Lipinski, M.; Preuten, M.; Rauch, M. P.; Schomakers, C.; Schulz, J.; Teroerde, M.; Wittmer, B.; Zhukov, V.; Albert, A.; Duchardt, D.; Erdmann, M.; Erdweg, S.; Esch, T.; Fischer, R.; Ghosh, S.; Güth, A.; Hebbeker, T.; Heidemann, C.; Hoepfner, K.; Keller, H.; Mastrolorenzo, L.; Merschmeyer, M.; Meyer, A.; Millet, P.; Mukherjee, S.; Pook, T.; Radziej, M.; Reithler, H.; Rieger, M.; Schmidt, A.; Teyssier, D.; Thüer, S.; Flügge, G.; Hlushchenko, O.; Kress, T.; Künsken, A.; Müller, T.; Nehrkorn, A.; Nowack, A.; Pistone, C.; Pooth, O.; Roy, D.; Sert, H.; Stahl, A.; Aldaya Martin, M.; Arndt, T.; Asawatangtrakuldee, C.; Babounikau, I.; Beernaert, K.; Behnke, O.; Behrens, U.; Bermúdez Martínez, A.; Bertsche, D.; Bin Anuar, A. A.; Borras, K.; Botta, V.; Campbell, A.; Connor, P.; Contreras-Campana, C.; Danilov, V.; De Wit, A.; Defranchis, M. M.; Diez Pardos, C.; Domínguez Damiani, D.; Eckerlin, G.; Eichhorn, T.; Elwood, A.; Eren, E.; Gallo, E.; Geiser, A.; Grohsjean, A.; Guthoff, M.; Haranko, M.; Harb, A.; Hauk, J.; Jung, H.; Kasemann, M.; Keaveney, J.; Kleinwort, C.; Knolle, J.; Krücker, D.; Lange, W.; Lelek, A.; Lenz, T.; Leonard, J.; Lipka, K.; Lohmann, W.; Mankel, R.; Melzer-Pellmann, I.-A.; Meyer, A. B.; Meyer, M.; Missiroli, M.; Mittag, G.; Mnich, J.; Myronenko, V.; Pflitsch, S. K.; Pitzl, D.; Raspereza, A.; Savitskyi, M.; Saxena, P.; Schütze, P.; Schwanenberger, C.; Shevchenko, R.; Singh, A.; Tholen, H.; Turkot, O.; Vagnerini, A.; Van Onsem, G. P.; Walsh, R.; Wen, Y.; Wichmann, K.; Wissing, C.; Zenaiev, O.; Aggleton, R.; Bein, S.; Benato, L.; Benecke, A.; Blobel, V.; Dreyer, T.; Ebrahimi, A.; Garutti, E.; Gonzalez, D.; Gunnellini, P.; Haller, J.; Hinzmann, A.; Karavdina, A.; Kasieczka, G.; Klanner, R.; Kogler, R.; Kovalchuk, N.; Kurz, S.; Kutzner, V.; Lange, J.; Marconi, D.; Multhaup, J.; Niedziela, M.; Niemeyer, C. E. N.; Nowatschin, D.; Perieanu, A.; Reimers, A.; Rieger, O.; Scharf, C.; Schleper, P.; Schumann, S.; Schwandt, J.; Sonneveld, J.; Stadie, H.; Steinbrück, G.; Stober, F. M.; Stöver, M.; Vanhoefer, A.; Vormwald, B.; Zoi, I.; Akbiyik, M.; Barth, C.; Baselga, M.; Baur, S.; Butz, E.; Caspart, R.; Chwalek, T.; Colombo, F.; De Boer, W.; Dierlamm, A.; El Morabit, K.; Faltermann, N.; Freund, B.; Giffels, M.; Harrendorf, M. A.; Hartmann, F.; Heindl, S. M.; Husemann, U.; Kassel, F.; Katkov, I.; Kudella, S.; Mitra, S.; Mozer, M. U.; Müller, T.; Plagge, M.; Quast, G.; Rabbertz, K.; Schröder, M.; Shvetsov, I.; Sieber, G.; Simonis, H. J.; Ulrich, R.; Wayand, S.; Weber, M.; Weiler, T.; Williamson, S.; Wöhrmann, C.; Wolf, R.; Anagnostou, G.; Daskalakis, G.; Geralis, T.; Kyriakis, A.; Loukas, D.; Paspalaki, G.; Topsis-Giotis, I.; Francois, B.; Karathanasis, G.; Kesisoglou, S.; Kontaxakis, P.; Panagiotou, A.; Papavergou, I.; Saoulidou, N.; Tziaferi, E.; Vellidis, K.; Kousouris, K.; Papakrivopoulos, I.; Tsipolitis, G.; Evangelou, I.; Foudas, C.; Gianneios, P.; Katsoulis, P.; Kokkas, P.; Mallios, S.; Manthos, N.; Papadopoulos, I.; Paradas, E.; Strologas, J.; Triantis, F. A.; Tsitsonis, D.; Bartók, M.; Csanad, M.; Filipovic, N.; Major, P.; Nagy, M. I.; Pasztor, G.; Surányi, O.; Veres, G. I.; Bencze, G.; Hajdu, C.; Horvath, D.; Hunyadi, Á.; Sikler, F.; Vámi, T. Á.; Veszpremi, V.; Vesztergombi, G.; Beni, N.; Czellar, S.; Karancsi, J.; Makovec, A.; Molnar, J.; Szillasi, Z.; Raics, P.; Trocsanyi, Z. L.; Ujvari, B.; Choudhury, S.; Komaragiri, J. R.; Tiwari, P. C.; Bahinipati, S.; Kar, C.; Mal, P.; Mandal, K.; Nayak, A.; Sahoo, D. K.; Swain, S. K.; Bansal, S.; Beri, S. B.; Bhatnagar, V.; Chauhan, S.; Chawla, R.; Dhingra, N.; Gupta, R.; Kaur, A.; Kaur, M.; Kaur, S.; Kumar, R.; Kumari, P.; Lohan, M.; Mehta, A.; Sandeep, K.; Sharma, S.; Singh, J. B.; Virdi, A. K.; Walia, G.; Bhardwaj, A.; Choudhary, B. C.; Garg, R. B.; Gola, M.; Keshri, S.; Kumar, A.; Malhotra, S.; Naimuddin, M.; Priyanka, P.; Ranjan, K.; Shah, A.; Sharma, R.; Bhardwaj, R.; Bharti, M.; Bhattacharya, R.; Bhattacharya, S.; Bhawandeep, U.; Bhowmik, D.; Dey, S.; Dutt, S.; Dutta, S.; Ghosh, S.; Mondal, K.; Nandan, S.; Purohit, A.; Rout, P. K.; Roy, A.; Roy Chowdhury, S.; Saha, G.; Sarkar, S.; Sharan, M.; Singh, B.; Thakur, S.; Behera, P. K.; Chudasama, R.; Dutta, D.; Jha, V.; Kumar, V.; Netrakanti, P. K.; Pant, L. M.; Shukla, P.; Aziz, T.; Bhat, M. A.; Dugad, S.; Mohanty, G. B.; Sur, N.; Sutar, B.; Verma, R. K.; Banerjee, S.; Bhattacharya, S.; Chatterjee, S.; Das, P.; Guchait, M.; Jain, S.; Karmakar, S.; Kumar, S.; Maity, M.; Majumder, G.; Mazumdar, K.; Sahoo, N.; Sarkar, T.; Chauhan, S.; Dube, S.; Hegde, V.; Kapoor, A.; Kothekar, K.; Pandey, S.; Rane, A.; Sharma, S.; Chenarani, S.; Eskandari Tadavani, E.; Etesami, S. M.; Khakzad, M.; Mohammadi Najafabadi, M.; Naseri, M.; Rezaei Hosseinabadi, F.; Safarzadeh, B.; Zeinali, M.; Felcini, M.; Grunewald, M.; Abbrescia, M.; Calabria, C.; Colaleo, A.; Creanza, D.; Cristella, L.; Filippis, N. De; De Palma, M.; Di Florio, A.; Errico, F.; Fiore, L.; Gelmi, A.; Iaselli, G.; Ince, M.; Lezki, S.; Maggi, G.; Maggi, M.; Miniello, G.; My, S.; Nuzzo, S.; Pompili, A.; Pugliese, G.; Radogna, R.; Ranieri, A.; Selvaggi, G.; Sharma, A.; Silvestris, L.; Venditti, R.; Verwilligen, P.; Zito, G.; Abbiendi, G.; Battilana, C.; Bonacorsi, D.; Borgonovi, L.; Braibant-Giacomelli, S.; Campanini, R.; Capiluppi, P.; Castro, A.; Cavallo, F. R.; Chhibra, S. S.; Ciocca, C.; Codispoti, G.; Cuffiani, M.; Dallavalle, G. M.; Fabbri, F.; Fanfani, A.; Fontanesi, E.; Giacomelli, P.; Grandi, C.; Guiducci, L.; Lo Meo, S.; Marcellini, S.; Masetti, G.; Montanari, A.; Navarria, F. L.; Perrotta, A.; Primavera, F.; Rossi, A. M.; Rovelli, T.; Siroli, G. P.; Tosi, N.; Albergo, S.; Di Mattia, A.; Potenza, R.; Tricomi, A.; Tuve, C.; Barbagli, G.; Chatterjee, K.; Ciulli, V.; Civinini, C.; D’Alessandro, R.; Focardi, E.; Latino, G.; Lenzi, P.; Meschini, M.; Paoletti, S.; Russo, L.; Sguazzoni, G.; Strom, D.; Viliani, L.; Benussi, L.; Bianco, S.; Fabbri, F.; Piccolo, D.; Ferro, F.; Ravera, F.; Robutti, E.; Tosi, S.; Benaglia, A.; Beschi, A.; Brianza, L.; Brivio, F.; Ciriolo, V.; Di Guida, S.; Dinardo, M. E.; Fiorendi, S.; Gennai, S.; Ghezzi, A.; Govoni, P.; Malberti, M.; Malvezzi, S.; Massironi, A.; Menasce, D.; Monti, F.; Moroni, L.; Paganoni, M.; Pedrini, D.; Ragazzi, S.; Tabarelli de Fatis, T.; Zuolo, D.; Buontempo, S.; Cavallo, N.; De Iorio, A.; Di Crescenzo, A.; Fabozzi, F.; Fienga, F.; Galati, G.; Iorio, A. O. M.; Khan, W. A.; Lista, L.; Meola, S.; Paolucci, P.; Sciacca, C.; Voevodina, E.; Azzi, P.; Bacchetta, N.; Bisello, D.; Boletti, A.; Bragagnolo, A.; Carlin, R.; Checchia, P.; Dall’Osso, M.; De Castro Manzano, P.; Dorigo, T.; Dosselli, U.; Gasparini, F.; Gasparini, U.; Gozzelino, A.; Hoh, S. Y.; Lacaprara, S.; Lujan, P.; Margoni, M.; Meneguzzo, A. T.; Pazzini, J.; Ronchese, P.; Rossin, R.; Simonetto, F.; Tiko, A.; Torassa, E.; Zanetti, M.; Zotto, P.; Zumerle, G.; Braghieri, A.; Magnani, A.; Montagna, P.; Ratti, S. P.; Re, V.; Ressegotti, M.; Riccardi, C.; Salvini, P.; Vai, I.; Vitulo, P.; Biasini, M.; Bilei, G. M.; Cecchi, C.; Ciangottini, D.; Fanò, L.; Lariccia, P.; Leonardi, R.; Manoni, E.; Mantovani, G.; Mariani, V.; Menichelli, M.; Rossi, A.; Santocchia, A.; Spiga, D.; Androsov, K.; Azzurri, P.; Bagliesi, G.; Bianchini, L.; Boccali, T.; Borrello, L.; Castaldi, R.; Ciocci, M. A.; Dell’Orso, R.; Fedi, G.; Fiori, F.; Giannini, L.; Giassi, A.; Grippo, M. T.; Ligabue, F.; Manca, E.; Mandorli, G.; Messineo, A.; Palla, F.; Rizzi, A.; Spagnolo, P.; Tenchini, R.; Tonelli, G.; Venturi, A.; Verdini, P. G.; Barone, L.; Cavallari, F.; Cipriani, M.; Del Re, D.; Di Marco, E.; Diemoz, M.; Gelli, S.; Longo, E.; Marzocchi, B.; Meridiani, P.; Organtini, G.; Pandolfi, F.; Paramatti, R.; Preiato, F.; Rahatlou, S.; Rovelli, C.; Santanastasio, F.; Amapane, N.; Arcidiacono, R.; Argiro, S.; Arneodo, M.; Bartosik, N.; Bellan, R.; Biino, C.; Cartiglia, N.; Cenna, F.; Cometti, S.; Costa, M.; Covarelli, R.; Demaria, N.; Kiani, B.; Mariotti, C.; Maselli, S.; Migliore, E.; Monaco, V.; Monteil, E.; Monteno, M.; Obertino, M. M.; Pacher, L.; Pastrone, N.; Pelliccioni, M.; Pinna Angioni, G. L.; Romero, A.; Ruspa, M.; Sacchi, R.; Shchelina, K.; Sola, V.; Solano, A.; Soldi, D.; Staiano, A.; Belforte, S.; Candelise, V.; Casarsa, M.; Cossutti, F.; Da Rold, A.; Della Ricca, G.; Vazzoler, F.; Zanetti, A.; Kim, D. H.; Kim, G. N.; Kim, M. S.; Lee, J.; Lee, S.; Lee, S. W.; Moon, C. S.; Oh, Y. D.; Pak, S. I.; Sekmen, S.; Son, D. C.; Yang, Y. C.; Kim, H.; Moon, D. H.; Oh, G.; Goh, J.; Kim, T. J.; Cho, S.; Choi, S.; Go, Y.; Gyun, D.; Ha, S.; Hong, B.; Jo, Y.; Lee, K.; Lee, K. S.; Lee, S.; Lim, J.; Park, S. K.; Roh, Y.; Kim, H. S.; Almond, J.; Kim, J.; Kim, J. S.; Lee, H.; Lee, K.; Nam, K.; Oh, S. B.; Radburn-Smith, B. C.; Seo, S. h.; Yang, U. K.; Yoo, H. D.; Yu, G. B.; Jeon, D.; Kim, H.; Kim, J. H.; Lee, J. S. H.; Park, I. C.; Choi, Y.; Hwang, C.; Lee, J.; Yu, I.; Dudenas, V.; Juodagalvis, A.; Vaitkus, J.; Ahmed, I.; Ibrahim, Z. A.; Md Ali, M. A. B.; Mohamad Idris, F.; Wan Abdullah, W. A. T.; Yusli, M. N.; Zolkapli, Z.; Benitez, J. F.; Castaneda Hernandez, A.; Murillo Quijada, J. A.; Castilla-Valdez, H.; De La Cruz-Burelo, E.; Duran-Osuna, M. C.; Heredia-De La Cruz, I.; Lopez-Fernandez, R.; Mejia Guisao, J.; Rabadan-Trejo, R. I.; Ramirez-Garcia, M.; Ramirez-Sanchez, G.; Reyes-Almanza, R.; Sanchez-Hernandez, A.; Carrillo Moreno, S.; Oropeza Barrera, C.; Vazquez Valencia, F.; Eysermans, J.; Pedraza, I.; Salazar Ibarguen, H. A.; Uribe Estrada, C.; Morelos Pineda, A.; Krofcheck, D.; Bheesette, S.; Butler, P. H.; Ahmad, A.; Ahmad, M.; Asghar, M. I.; Hassan, Q.; Hoorani, H. R.; Saddique, A.; Shah, M. A.; Shoaib, M.; Waqas, M.; Bialkowska, H.; Bluj, M.; Boimska, B.; Frueboes, T.; Górski, M.; Kazana, M.; Szleper, M.; Traczyk, P.; Zalewski, P.; Bunkowski, K.; Byszuk, A.; Doroba, K.; Kalinowski, A.; Konecki, M.; Krolikowski, J.; Misiura, M.; Olszewski, M.; Pyskir, A.; Walczak, M.; Araujo, M.; Bargassa, P.; Beirão Da Cruz E Silva, C.; Di Francesco, A.; Faccioli, P.; Galinhas, B.; Gallinaro, M.; Hollar, J.; Leonardo, N.; Nemallapudi, M. V.; Seixas, J.; Strong, G.; Toldaiev, O.; Vadruccio, D.; Varela, J.; Gavrilenko, M.; Golunov, A.; Golutvin, I.; Kamenev, A.; Karjavine, V.; Korenkov, V.; Kozlov, G.; Lanev, A.; Malakhov, A.; Matveev, V.; Moisenz, P.; Palichik, V.; Perelygin, V.; Shmatov, S.; Shulha, S.; Teryaev, O.; Voytishin, N.; Yuldashev, B. S.; Zarubin, A.; Golovtsov, V.; Ivanov, Y.; Kim, V.; Kuznetsova, E.; Levchenko, P.; Murzin, V.; Oreshkin, V.; Smirnov, I.; Sosnov, D.; Sulimov, V.; Uvarov, L.; Vavilov, S.; Vorobyev, A.; Andreev, Y.; Dermenev, A.; Gninenko, S.; Golubev, N.; Karneyeu, A.; Kirsanov, M.; Krasnikov, N.; Pashenkov, A.; Tlisov, D.; Toropin, A.; Epshteyn, V.; Gavrilov, V.; Lychkovskaya, N.; Popov, V.; Pozdnyakov, I.; Safronov, G.; Spiridonov, A.; Stepennov, A.; Stolin, V.; Toms, M.; Vlasov, E.; Zhokin, A.; Aushev, T.; Chistov, R.; Danilov, M.; Parygin, P.; Philippov, D.; Polikarpov, S.; Tarkovskii, E.; Andreev, V.; Azarkin, M.; Dremin, I.; Kirakosyan, M.; Rusakov, S. V.; Terkulov, A.; Baskakov, A.; Belyaev, A.; Boos, E.; Demiyanov, A.; Ershov, A.; Gribushin, A.; Kodolova, O.; Korotkikh, V.; Lokhtin, I.; Miagkov, I.; Obraztsov, S.; Petrushanko, S.; Savrin, V.; Snigirev, A.; Vardanyan, I.; Barnyakov, A.; Blinov, V.; Dimova, T.; Kardapoltsev, L.; Skovpen, Y.; Azhgirey, I.; Bayshev, I.; Bitioukov, S.; Elumakhov, D.; Godizov, A.; Kachanov, V.; Kalinin, A.; Konstantinov, D.; Mandrik, P.; Petrov, V.; Ryutin, R.; Slabospitskii, S.; Sobol, A.; Troshin, S.; Tyurin, N.; Uzunian, A.; Volkov, A.; Babaev, A.; Baidali, S.; Okhotnikov, V.; Adzic, P.; Cirkovic, P.; Devetak, D.; Dordevic, M.; Milosevic, J.; Alcaraz Maestre, J.; Álvarez Fernández, A.; Bachiller, I.; Barrio Luna, M.; Brochero Cifuentes, J. A.; Cerrada, M.; Colino, N.; De La Cruz, B.; Delgado Peris, A.; Fernandez Bedoya, C.; Fernández Ramos, J. P.; Flix, J.; Fouz, M. C.; Gonzalez Lopez, O.; Goy Lopez, S.; Hernandez, J. M.; Josa, M. I.; Moran, D.; Pérez-Calero Yzquierdo, A.; Puerta Pelayo, J.; Redondo, I.; Romero, L.; Soares, M. S.; Triossi, A.; Albajar, C.; Trocóniz, J. F. de; Cuevas, J.; Erice, C.; Fernandez Menendez, J.; Folgueras, S.; Gonzalez Caballero, I.; González Fernández, J. R.; Palencia Cortezon, E.; Rodríguez Bouza, V.; Sanchez Cruz, S.; Vischia, P.; Vizan Garcia, J. M.; Cabrillo, I. J.; Calderon, A.; Chazin Quero, B.; Duarte Campderros, J.; Fernandez, M.; Fernández Manteca, P. J.; García Alonso, A.; Garcia-Ferrero, J.; Gomez, G.; Lopez Virto, A.; Marco, J.; Martinez Rivero, C.; Martinez Ruiz del Arbol, P.; Matorras, F.; Piedra Gomez, J.; Prieels, C.; Rodrigo, T.; Ruiz-Jimeno, A.; Scodellaro, L.; Trevisani, N.; Vila, I.; Vilar Cortabitarte, R.; Wickramage, N.; Abbaneo, D.; Akgun, B.; Auffray, E.; Auzinger, G.; Baillon, P.; Ball, A. H.; Barney, D.; Bendavid, J.; Bianco, M.; Bocci, A.; Botta, C.; Brondolin, E.; Camporesi, T.; Cepeda, M.; Cerminara, G.; Chapon, E.; Chen, Y.; Cucciati, G.; d’Enterria, D.; Dabrowski, A.; Daci, N.; Daponte, V.; David, A.; De Roeck, A.; Deelen, N.; Dobson, M.; Dünser, M.; Dupont, N.; Elliott-Peisert, A.; Everaerts, P.; Fallavollita, F.; Fasanella, D.; Franzoni, G.; Fulcher, J.; Funk, W.; Gigi, D.; Gilbert, A.; Gill, K.; Glege, F.; Guilbaud, M.; Gulhan, D.; Hegeman, J.; Heidegger, C.; Innocente, V.; Jafari, A.; Janot, P.; Karacheban, O.; Kieseler, J.; Kornmayer, A.; Krammer, M.; Lange, C.; Lecoq, P.; Lourenço, C.; Malgeri, L.; Mannelli, M.; Meijers, F.; Merlin, J. A.; Mersi, S.; Meschi, E.; Milenovic, P.; Moortgat, F.; Mulders, M.; Ngadiuba, J.; Nourbakhsh, S.; Orfanelli, S.; Orsini, L.; Pantaleo, F.; Pape, L.; Perez, E.; Peruzzi, M.; Petrilli, A.; Petrucciani, G.; Pfeiffer, A.; Pierini, M.; Pitters, F. M.; Rabady, D.; Racz, A.; Reis, T.; Rolandi, G.; Rovere, M.; Sakulin, H.; Schäfer, C.; Schwick, C.; Seidel, M.; Selvaggi, M.; Sharma, A.; Silva, P.; Sphicas, P.; Stakia, A.; Steggemann, J.; Tosi, M.; Treille, D.; Tsirou, A.; Veckalns, V.; Verzetti, M.; Zeuner, W. D.; Caminada, L.; Deiters, K.; Erdmann, W.; Horisberger, R.; Ingram, Q.; Kaestli, H. C.; Kotlinski, D.; Langenegger, U.; Rohe, T.; Wiederkehr, S. A.; Backhaus, M.; Bäni, L.; Berger, P.; Chernyavskaya, N.; Dissertori, G.; Dittmar, M.; Donegà, M.; Dorfer, C.; Gómez Espinosa, T. A.; Grab, C.; Hits, D.; Klijnsma, T.; Lustermann, W.; Manzoni, R. A.; Marionneau, M.; Meinhard, M. T.; Micheli, F.; Musella, P.; Nessi-Tedaldi, F.; Pata, J.; Pauss, F.; Perrin, G.; Perrozzi, L.; Pigazzini, S.; Quittnat, M.; Reissel, C.; Ruini, D.; Sanz Becerra, D. A.; Schönenberger, M.; Shchutska, L.; Tavolaro, V. R.; Theofilatos, K.; Vesterbacka Olsson, M. L.; Wallny, R.; Zhu, D. H.; Aarrestad, T. K.; Amsler, C.; Brzhechko, D.; Canelli, M. F.; De Cosa, A.; Del Burgo, R.; Donato, S.; Galloni, C.; Hreus, T.; Kilminster, B.; Leontsinis, S.; Neutelings, I.; Rauco, G.; Robmann, P.; Salerno, D.; Schweiger, K.; Seitz, C.; Takahashi, Y.; Zucchetta, A.; Chang, Y. H.; Cheng, K. y.; Doan, T. H.; Khurana, R.; Kuo, C. M.; Lin, W.; Pozdnyakov, A.; Yu, S. S.; Chang, P.; Chao, Y.; Chen, K. F.; Chen, P. H.; Hou, W.-S.; Kumar, A.; Liu, Y. F.; Lu, R.-S.; Paganis, E.; Psallidas, A.; Steen, A.; Asavapibhop, B.; Srimanobhas, N.; Suwonjandee, N.; Bat, A.; Boran, F.; Cerci, S.; Damarseckin, S.; Demiroglu, Z. S.; Dolek, F.; Dozen, C.; Dumanoglu, I.; Eskut, E.; Girgis, S.; Gokbulut, G.; Guler, Y.; Gurpinar, E.; Hos, I.; Isik, C.; Kangal, E. E.; Kara, O.; Kayis Topaksu, A.; Kiminsu, U.; Oglakci, M.; Onengut, G.; Ozdemir, K.; Polatoz, A.; Tali, B.; Tok, U. G.; Turkcapar, S.; Zorbakir, I. S.; Zorbilmez, C.; Isildak, B.; Karapinar, G.; Yalvac, M.; Zeyrek, M.; Atakisi, I. O.; Gülmez, E.; Kaya, M.; Kaya, O.; Tekten, S.; Yetkin, E. A.; Agaras, M. N.; Cakir, A.; Cankocak, K.; Komurcu, Y.; Sen, S.; Grynyov, B.; Levchuk, L.; Ball, F.; Beck, L.; Brooke, J. J.; Burns, D.; Clement, E.; Cussans, D.; Davignon, O.; Flacher, H.; Goldstein, J.; Heath, G. P.; Heath, H. F.; Kreczko, L.; Newbold, D. M.; Paramesvaran, S.; Penning, B.; Sakuma, T.; Smith, D.; Smith, V. J.; Taylor, J.; Titterton, A.; Belyaev, A.; Brew, C.; Brown, R. M.; Cieri, D.; Cockerill, D. J. A.; Coughlan, J. A.; Harder, K.; Harper, S.; Linacre, J.; Olaiya, E.; Petyt, D.; Shepherd-Themistocleous, C. H.; Thea, A.; Tomalin, I. R.; Williams, T.; Womersley, W. J.; Bainbridge, R.; Bloch, P.; Borg, J.; Breeze, S.; Buchmuller, O.; Bundock, A.; Colling, D.; Dauncey, P.; Davies, G.; Della Negra, M.; Di Maria, R.; Haddad, Y.; Hall, G.; Iles, G.; James, T.; Komm, M.; Laner, C.; Lyons, L.; Magnan, A.-M.; Malik, S.; Martelli, A.; Nash, J.; Nikitenko, A.; Palladino, V.; Pesaresi, M.; Raymond, D. M.; Richards, A.; Rose, A.; Scott, E.; Seez, C.; Shtipliyski, A.; Singh, G.; Stoye, M.; Strebler, T.; Summers, S.; Tapper, A.; Uchida, K.; Virdee, T.; Wardle, N.; Winterbottom, D.; Wright, J.; Zenz, S. C.; Cole, J. E.; Hobson, P. R.; Khan, A.; Kyberd, P.; Mackay, C. K.; Morton, A.; Reid, I. D.; Teodorescu, L.; Zahid, S.; Call, K.; Dittmann, J.; Hatakeyama, K.; Liu, H.; Madrid, C.; Mcmaster, B.; Pastika, N.; Smith, C.; Bartek, R.; Dominguez, A.; Buccilli, A.; Cooper, S. I.; Henderson, C.; Rumerio, P.; West, C.; Arcaro, D.; Bose, T.; Gastler, D.; Pinna, D.; Rankin, D.; Richardson, C.; Rohlf, J.; Sulak, L.; Zou, D.; Benelli, G.; Coubez, X.; Cutts, D.; Hadley, M.; Hakala, J.; Heintz, U.; Hogan, J. M.; Kwok, K. H. M.; Laird, E.; Landsberg, G.; Lee, J.; Mao, Z.; Narain, M.; Sagir, S.; Syarif, R.; Usai, E.; Yu, D.; Band, R.; Brainerd, C.; Breedon, R.; Burns, D.; Calderon De La Barca Sanchez, M.; Chertok, M.; Conway, J.; Conway, R.; Cox, P. T.; Erbacher, R.; Flores, C.; Funk, G.; Ko, W.; Kukral, O.; Lander, R.; Mulhearn, M.; Pellett, D.; Pilot, J.; Shalhout, S.; Shi, M.; Stolp, D.; Taylor, D.; Tos, K.; Tripathi, M.; Wang, Z.; Zhang, F.; Bachtis, M.; Bravo, C.; Cousins, R.; Dasgupta, A.; Florent, A.; Hauser, J.; Ignatenko, M.; Mccoll, N.; Regnard, S.; Saltzberg, D.; Schnaible, C.; Valuev, V.; Bouvier, E.; Burt, K.; Clare, R.; Gary, J. W.; Ghiasi Shirazi, S. M. A.; Hanson, G.; Karapostoli, G.; Kennedy, E.; Lacroix, F.; Long, O. R.; Olmedo Negrete, M.; Paneva, M. I.; Si, W.; Wang, L.; Wei, H.; Wimpenny, S.; Yates, B. R.; Branson, J. G.; Chang, P.; Cittolin, S.; Derdzinski, M.; Gerosa, R.; Gilbert, D.; Hashemi, B.; Holzner, A.; Klein, D.; Kole, G.; Krutelyov, V.; Letts, J.; Masciovecchio, M.; Olivito, D.; Padhi, S.; Pieri, M.; Sani, M.; Sharma, V.; Simon, S.; Tadel, M.; Vartak, A.; Wasserbaech, S.; Wood, J.; Würthwein, F.; Yagil, A.; Zevi Della Porta, G.; Amin, N.; Bhandari, R.; Bradmiller-Feld, J.; Campagnari, C.; Citron, M.; Dishaw, A.; Dutta, V.; Franco Sevilla, M.; Gouskos, L.; Heller, R.; Incandela, J.; Ovcharova, A.; Qu, H.; Richman, J.; Stuart, D.; Suarez, I.; Wang, S.; Yoo, J.; Anderson, D.; Bornheim, A.; Lawhorn, J. M.; Newman, H. B.; Nguyen, T. Q.; Spiropulu, M.; Vlimant, J. R.; Wilkinson, R.; Xie, S.; Zhang, Z.; Zhu, R. Y.; Andrews, M. B.; Ferguson, T.; Mudholkar, T.; Paulini, M.; Sun, M.; Vorobiev, I.; Weinberg, M.; Cumalat, J. P.; Ford, W. T.; Jensen, F.; Johnson, A.; Krohn, M.; MacDonald, E.; Mulholland, T.; Patel, R.; Perloff, A.; Stenson, K.; Ulmer, K. A.; Wagner, S. R.; Alexander, J.; Chaves, J.; Cheng, Y.; Chu, J.; Datta, A.; Mcdermott, K.; Mirman, N.; Patterson, J. R.; Quach, D.; Rinkevicius, A.; Ryd, A.; Skinnari, L.; Soffi, L.; Tan, S. M.; Tao, Z.; Thom, J.; Tucker, J.; Wittich, P.; Zientek, M.; Abdullin, S.; Albrow, M.; Alyari, M.; Apollinari, G.; Apresyan, A.; Apyan, A.; Banerjee, S.; Bauerdick, L. A. T.; Beretvas, A.; Berryhill, J.; Bhat, P. C.; Burkett, K.; Butler, J. N.; Canepa, A.; Cerati, G. B.; Cheung, H. W. K.; Chlebana, F.; Cremonesi, M.; Duarte, J.; Elvira, V. D.; Freeman, J.; Gecse, Z.; Gottschalk, E.; Gray, L.; Green, D.; Grünendahl, S.; Gutsche, O.; Hanlon, J.; Harris, R. M.; Hasegawa, S.; Hirschauer, J.; Hu, Z.; Jayatilaka, B.; Jindariani, S.; Johnson, M.; Joshi, U.; Klima, B.; Kortelainen, M. J.; Kreis, B.; Lammel, S.; Lincoln, D.; Lipton, R.; Liu, M.; Liu, T.; Lykken, J.; Maeshima, K.; Marraffino, J. M.; Mason, D.; McBride, P.; Merkel, P.; Mrenna, S.; Nahn, S.; O’Dell, V.; Pedro, K.; Pena, C.; Prokofyev, O.; Rakness, G.; Ristori, L.; Savoy-Navarro, A.; Schneider, B.; Sexton-Kennedy, E.; Soha, A.; Spalding, W. J.; Spiegel, L.; Stoynev, S.; Strait, J.; Strobbe, N.; Taylor, L.; Tkaczyk, S.; Tran, N. V.; Uplegger, L.; Vaandering, E. W.; Vernieri, C.; Verzocchi, M.; Vidal, R.; Wang, M.; Weber, H. A.; Whitbeck, A.; Acosta, D.; Avery, P.; Bortignon, P.; Bourilkov, D.; Brinkerhoff, A.; Cadamuro, L.; Carnes, A.; Carver, M.; Curry, D.; Field, R. D.; Gleyzer, S. V.; Joshi, B. M.; Konigsberg, J.; Korytov, A.; Lo, K. H.; Ma, P.; Matchev, K.; Mei, H.; Mitselmakher, G.; Rosenzweig, D.; Shi, K.; Sperka, D.; Wang, J.; Wang, S.; Zuo, X.; Joshi, Y. R.; Linn, S.; Ackert, A.; Adams, T.; Askew, A.; Hagopian, S.; Hagopian, V.; Johnson, K. F.; Kolberg, T.; Martinez, G.; Perry, T.; Prosper, H.; Saha, A.; Schiber, C.; Yohay, R.; Baarmand, M. M.; Bhopatkar, V.; Colafranceschi, S.; Hohlmann, M.; Noonan, D.; Rahmani, M.; Roy, T.; Yumiceva, F.; Adams, M. R.; Apanasevich, L.; Berry, D.; Betts, R. R.; Cavanaugh, R.; Chen, X.; Dittmer, S.; Evdokimov, O.; Gerber, C. E.; Hangal, D. A.; Hofman, D. J.; Jung, K.; Kamin, J.; Mills, C.; Sandoval Gonzalez, I. D.; Tonjes, M. B.; Trauger, H.; Varelas, N.; Wang, H.; Wang, X.; Wu, Z.; Zhang, J.; Alhusseini, M.; Bilki, B.; Clarida, W.; Dilsiz, K.; Durgut, S.; Gandrajula, R. P.; Haytmyradov, M.; Khristenko, V.; Merlo, J.-P.; Mestvirishvili, A.; Moeller, A.; Nachtman, J.; Ogul, H.; Onel, Y.; Ozok, F.; Penzo, A.; Snyder, C.; Tiras, E.; Wetzel, J.; Blumenfeld, B.; Cocoros, A.; Eminizer, N.; Fehling, D.; Feng, L.; Gritsan, A. V.; Hung, W. T.; Maksimovic, P.; Roskes, J.; Sarica, U.; Swartz, M.; Xiao, M.; You, C.; Al-bataineh, A.; Baringer, P.; Bean, A.; Boren, S.; Bowen, J.; Bylinkin, A.; Castle, J.; Khalil, S.; Kropivnitskaya, A.; Majumder, D.; Mcbrayer, W.; Murray, M.; Rogan, C.; Sanders, S.; Schmitz, E.; Tapia Takaki, J. D.; Wang, Q.; Duric, S.; Ivanov, A.; Kaadze, K.; Kim, D.; Maravin, Y.; Mendis, D. R.; Mitchell, T.; Modak, A.; Mohammadi, A.; Saini, L. K.; Skhirtladze, N.; Rebassoo, F.; Wright, D.; Baden, A.; Baron, O.; Belloni, A.; Eno, S. C.; Feng, Y.; Ferraioli, C.; Hadley, N. J.; Jabeen, S.; Jeng, G. Y.; Kellogg, R. G.; Kunkle, J.; Mignerey, A. C.; Nabili, S.; Ricci-Tam, F.; Shin, Y. H.; Skuja, A.; Tonwar, S. C.; Wong, K.; Abercrombie, D.; Allen, B.; Azzolini, V.; Baty, A.; Bauer, G.; Bi, R.; Brandt, S.; Busza, W.; Cali, I. A.; D’Alfonso, M.; Demiragli, Z.; Gomez Ceballos, G.; Goncharov, M.; Harris, P.; Hsu, D.; Hu, M.; Iiyama, Y.; Innocenti, G. M.; Klute, M.; Kovalskyi, D.; Lee, Y.-J.; Luckey, P. D.; Maier, B.; Marini, A. C.; Mcginn, C.; Mironov, C.; Narayanan, S.; Niu, X.; Paus, C.; Roland, C.; Roland, G.; Stephans, G. S. F.; Sumorok, K.; Tatar, K.; Velicanu, D.; Wang, J.; Wang, T. W.; Wyslouch, B.; Zhaozhong, S.; Benvenuti, A. C.; Chatterjee, R. M.; Evans, A.; Hansen, P.; Jain, S.; Kalafut, S.; Kubota, Y.; Lesko, Z.; Mans, J.; Ruckstuhl, N.; Rusack, R.; Turkewitz, J.; Wadud, M. A.; Acosta, J. G.; Oliveros, S.; Avdeeva, E.; Bloom, K.; Claes, D. R.; Fangmeier, C.; Golf, F.; Gonzalez Suarez, R.; Kamalieddin, R.; Kravchenko, I.; Monroy, J.; Siado, J. E.; Snow, G. R.; Stieger, B.; Godshalk, A.; Harrington, C.; Iashvili, I.; Kharchilava, A.; Mclean, C.; Nguyen, D.; Parker, A.; Rappoccio, S.; Roozbahani, B.; Alverson, G.; Barberis, E.; Freer, C.; Hortiangtham, A.; Morse, D. M.; Orimoto, T.; Teixeira De Lima, R.; Wamorkar, T.; Wang, B.; Wisecarver, A.; Wood, D.; Bhattacharya, S.; Charaf, O.; Hahn, K. A.; Mucia, N.; Odell, N.; Schmitt, M. H.; Sung, K.; Trovato, M.; Velasco, M.; Bucci, R.; Dev, N.; Hildreth, M.; Hurtado Anampa, K.; Jessop, C.; Karmgard, D. J.; Kellams, N.; Lannon, K.; Li, W.; Loukas, N.; Marinelli, N.; Meng, F.; Mueller, C.; Musienko, Y.; Planer, M.; Reinsvold, A.; Ruchti, R.; Siddireddy, P.; Smith, G.; Taroni, S.; Wayne, M.; Wightman, A.; Wolf, M.; Woodard, A.; Alimena, J.; Antonelli, L.; Bylsma, B.; Durkin, L. S.; Flowers, S.; Francis, B.; Hart, A.; Hill, C.; Ji, W.; Ling, T. Y.; Luo, W.; Winer, B. L.; Cooperstein, S.; Elmer, P.; Hardenbrook, J.; Higginbotham, S.; Kalogeropoulos, A.; Lange, D.; Lucchini, M. T.; Luo, J.; Marlow, D.; Mei, K.; Ojalvo, I.; Olsen, J.; Palmer, C.; Piroué, P.; Salfeld-Nebgen, J.; Stickland, D.; Tully, C.; Malik, S.; Norberg, S.; Barker, A.; Barnes, V. E.; Das, S.; Gutay, L.; Jones, M.; Jung, A. W.; Khatiwada, A.; Mahakud, B.; Miller, D. H.; Neumeister, N.; Peng, C. C.; Piperov, S.; Qiu, H.; Schulte, J. F.; Sun, J.; Wang, F.; Xiao, R.; Xie, W.; Cheng, T.; Dolen, J.; Parashar, N.; Chen, Z.; Ecklund, K. M.; Freed, S.; Geurts, F. J. M.; Kilpatrick, M.; Li, W.; Padley, B. P.; Redjimi, R.; Roberts, J.; Rorie, J.; Shi, W.; Tu, Z.; Zabel, J.; Zhang, A.; Bodek, A.; Barbaro, P. de; Demina, R.; Duh, Y. t.; Dulemba, J. L.; Fallon, C.; Ferbel, T.; Galanti, M.; Garcia-Bellido, A.; Han, J.; Hindrichs, O.; Khukhunaishvili, A.; Tan, P.; Taus, R.; Agapitos, A.; Chou, J. P.; Gershtein, Y.; Halkiadakis, E.; Heindl, M.; Hughes, E.; Kaplan, S.; Kunnawalkam Elayavalli, R.; Kyriacou, S.; Lath, A.; Montalvo, R.; Nash, K.; Osherson, M.; Saka, H.; Salur, S.; Schnetzer, S.; Sheffield, D.; Somalwar, S.; Stone, R.; Thomas, S.; Thomassen, P.; Walker, M.; Delannoy, A. G.; Heideman, J.; Riley, G.; Spanier, S.; Bouhali, O.; Celik, A.; Dalchenko, M.; De Mattia, M.; Delgado, A.; Dildick, S.; Eusebi, R.; Gilmore, J.; Huang, T.; Kamon, T.; Luo, S.; Mueller, R.; Overton, D.; Perniè, L.; Rathjens, D.; Safonov, A.; Akchurin, N.; Damgov, J.; De Guio, F.; Dudero, P. R.; Kunori, S.; Lamichhane, K.; Lee, S. W.; Mengke, T.; Muthumuni, S.; Peltola, T.; Undleeb, S.; Volobouev, I.; Wang, Z.; Greene, S.; Gurrola, A.; Janjam, R.; Johns, W.; Maguire, C.; Melo, A.; Ni, H.; Padeken, K.; Ruiz Alvarez, J. D.; Sheldon, P.; Tuo, S.; Velkovska, J.; Verweij, M.; Xu, Q.; Arenton, M. W.; Barria, P.; Cox, B.; Hirosky, R.; Joyce, M.; Ledovskoy, A.; Li, H.; Neu, C.; Sinthuprasith, T.; Wang, Y.; Wolfe, E.; Xia, F.; Harr, R.; Karchin, P. E.; Poudyal, N.; Sturdy, J.; Thapa, P.; Zaleski, S.; Brodski, M.; Buchanan, J.; Caillol, C.; Carlsmith, D.; Dasu, S.; Dodd, L.; Gomber, B.; Grothe, M.; Herndon, M.; Hervé, A.; Hussain, U.; Klabbers, P.; Lanaro, A.; Long, K.; Loveless, R.; Ruggles, T.; Savin, A.; Sharma, V.; Smith, N.; Smith, W. H.; Woods, N.
2020. Physical review letters, 125 (10), Art-Nr. 102001. doi:10.1103/PhysRevLett.125.102001

Influence of Interstitial Oxygen on the Tribology of Ti6Al4V
Kümmel, D.; Schneider, J.; Gumbsch, P.
2020. Tribology letters, 68 (3), Art. Nr.: 96. doi:10.1007/s11249-020-01327-4

Calibrating micro-computed tomography data to permeability experiments and petrography – insights from Digital Rocks
Monsees, A. C.; Subhedar, A.; Busch, B.; Nestler, B.; Hilgers, C.
2020. Oil gas, (3/2020), 28–33. doi:10.19225/200908

Data-driven exploration and continuum modeling of dislocation networks
Sudmanns, M.; Bach, J.; Weygand, D.; Schulz, K.
2020. Modelling and simulation in materials science and engineering, 28 (6), Art. Nr.: 065001. doi:10.1088/1361-651X/ab97ef

A continuum damage mechanics model for fatigue and degradation of fiber reinforced materials
Hohe, J.; Gall, M.; Fliegener, S.; Hamid, Z. M. A.
2020. Journal of composite materials, 54 (21), 2837–2852. doi:10.1177/0021998320904142

Computational modeling of syntaxial overgrowth cementation and fracture propagation in sedimentary rocks. PhD dissertation
Prajapati, N.
2020, August 27. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000122917

Skalenübergreifende Analyse makroporöser Membranen im Kontext digitaler Zwillinge. PhD dissertation
Altschuh, P.
2020, August 26. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000122904

A digital workflow for learning the reduced-order structure-property linkages for permeability of porous membranes
Yabansu, Y. C.; Altschuh, P.; Hötzer, J.; Selzer, M.; Nestler, B.; Kalidindi, S. R.
2020. Acta materialia, 195, 668–680. doi:10.1016/j.actamat.2020.06.003

Distinguishing interstitial and substitutional diffusion in grand-potential based phase-field model
Kubendran Amos, P. G.; Nestler, B.
2020. Materialia, 12, Art.Nr. 100820. doi:10.1016/j.mtla.2020.100820

How do chemical patterns affect equilibrium droplet shapes?
Wu, Y.; Wang, F.; Ma, S.; Selzer, M.; Nestler, B.
2020. Soft matter, 16 (26), 6115–6127. doi:10.1039/d0sm00196a

Critical issues for the ground control of shallow roadways in weak ground: a case study
Ma, S.; Liu, X.; Gutierrez, M.
2020. Arabian journal of geosciences, 13 (14), Art.-Nr.: 623. doi:10.1007/s12517-020-05639-6

Influence of topological structure and chemical segregation on the thermal and mechanical properties of Pd–Si nanoglasses
Nandam, S. H.; Adjaoud, O.; Schwaiger, R.; Ivanisenko, Y.; Chellali, M. R.; Wang, D.; Albe, K.; Hahn, H.
2020. Acta materialia, 193, 252–260. doi:10.1016/j.actamat.2020.03.021

Numerical and Experimental Characterization of Elastic Properties of a Novel, Highly Homogeneous Interpenetrating Metal Ceramic Composite
Horny, D.; Schukraft, J.; Weidenmann, K. A.; Schulz, K.
2020. Advanced engineering materials, 22 (7), Art.Nr. 1901556. doi:10.1002/adem.201901556

Einfluss laserinduzierter Veränderungen der lokalen Materialchemie auf das tribologische Verhalten von Ti6Al4V. PhD dissertation
Kümmel, D.
2020, June 26. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000120420

Elementare Ermüdungsmechanismen in Metallen zur Lebensdauervorhersage mittels Versetzungsdynamiksimulation. PhD dissertation
El-Achkar, T.
2020, June 18. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000120240

Morphological stability of rod-shaped continuous phases
Wang, F.; Tschukin, O.; Leisner, T.; Zhang, H.; Nestler, B.; Selzer, M.; Cadilha Marques, G.; Aghassi-Hagmann, J.
2020. Acta materialia, 192, 20–29. doi:10.1016/j.actamat.2020.04.028

Quadrijunctions-stunted grain growth in duplex microstructure: A multiphase-field analysis
Perumal, R.; Kubendran Amos, P. G.; Selzer, M.; Nestler, B.
2020. Scripta materialia, 182, 16–20. doi:10.1016/j.scriptamat.2020.02.041

Analysis of single crystalline microwires under torsion using a dislocation-based continuum formulation
Zoller, K.; Schulz, K.
2020. Acta materialia, 191, 198–210. doi:10.1016/j.actamat.2020.03.057

Modellierung mehrkomponentiger Materialsysteme für die Phasenfeldmethode und Analyse der simulierten Mikrostrukturen. PhD dissertation
Kellner, M.
2020, May 20. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119330

Multiphase-field modelling of concurrent grain growth and coarsening in complex multicomponent systems
Kubendran Amos, P. G.; Perumal, R.; Selzer, M.; Nestler, B.
2020. Journal of materials science & technology, 45, 215–229. doi:10.1016/j.jmst.2019.11.011

Model-free Adaptive Optimal Control of Episodic Fixed-horizon Manufacturing Processes Using Reinforcement Learning
Dornheim, J.; Link, N.; Gumbsch, P.
2020. International journal of control, automation, and systems, 18 (5). doi:10.1007/s12555-019-0120-7

A phase-field study on polymerization-induced phase separation occasioned by diffusion and capillary flow - a mechanism for the formation of porous microstructures in membranes
Wang, F.; Ratke, L.; Zhang, H.; Altschuh, P.; Nestler, B.
2020. Journal of sol gel science and technology, 94 (1), 356–374. doi:10.1007/s10971-020-05238-7

Chemomechanische Modellierung der Wärmebehandlung von Stählen mit der Phasenfeldmethode. PhD dissertation
Schoof, E.
2020, April 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000117917

Fundamentals of lubricated friction in deep drawing of zinc coated sheet metal considering contacting surface morphology and chemistry. PhD dissertation
Rakotomahefa, M.
2020, March 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000117585

Discrete and continuum modelling of size effects in architectured unstable metamaterials
Findeisen, C.; Forest, S.; Hohe, J.; Gumbsch, P.
2020. Continuum mechanics and thermodynamics, 32 (2), 1629–1645. doi:10.1007/s00161-020-00870-8

Effect of Environment on Microstructure Evolution and Friction of Au–Ni Multilayers
Cihan, E.; Jungjohann, K.; Argibay, N.; Chandross, M.; Dienwiebel, M.
2020. Tribology letters, 68 (1), Art. Nr.: 30. doi:10.1007/s11249-019-1245-9

Numerical evaluation of surface welding residual stress behavior under multiaxial mechanical loading and experimental validations
Hemmesi, K.; Mallet, P.; Farajian, M.
2020. International journal of mechanical sciences, 168, Art. Nr.: 105127. doi:10.1016/j.ijmecsci.2019.105127

Solid solution strengthening and deformation behavior of single-phase Cu-base alloys under tribological load
Laube, S.; Kauffmann, A.; Ruebeling, F.; Freudenberger, J.; Heilmaier, M.; Greiner, C.
2020. Acta materialia, 185, 300–308. doi:10.1016/j.actamat.2019.12.005

Influence of stress-free transformation strain on the autocatalytic growth of bainite: A multiphase-field analysis
Schoof, E.; Kubendran Amos, P. G.; Schneider, D.; Nestler, B.
2020. Materialia, 9, Article: 100620. doi:10.1016/j.mtla.2020.100620

Early deformation mechanisms in the shear affected region underneath a copper sliding contact
Haug, C.; Ruebeling, F.; Kashiwar, A.; Gumbsch, P.; Kübel, C.; Greiner, C.
2020. Nature Communications, 11 (1), Art.-Nr. 839. doi:10.1038/s41467-020-14640-2

SuLMaSS - Sustainable Lifecycle Management for Scientific Software
Loewe, A.; Seemann, G.; Wülfers, E. M.; Huang, Y.-L.; Sánchez, J.; Bach, F.; Ulrich, R.; Selzer, M.
2020. E-Science-Tage 2019 : data to knowledge. Hrsg.: V. Heuveline, 238–240, Universitätsbibliothek Heidelberg

Application of Random Forests in ToF-SIMS Data
Zhao, Y.; Otto, S.-K.; Brandt, N.; Selzer, M.; Nestler, B.
2020. Procedia computer science, 176, 410–419. doi:10.1016/j.procs.2020.08.042

Development of an Openfoam Solver for Numerical Simulation of Carbonization of Biomasses in Rotary Kilns
Tavakkol, S.; Zirwes, T.; Denev, J. A.; Jamshidi, F.; Bockhorn, H.
2020. OpenFOAM Workshop, June 22 - 25, 2020, Arlington, Virginia, USA

Phase-inherent linear visco-elasticity model for infinitesimal deformations in the multiphase-field context
Schwab, F. K.; Reiter, A.; Herrmann, C.; Schneider, D.; Nestler, B.
2020. Advanced modeling and simulation in engineering sciences, 7 (1), Art.-Nr.: 47. doi:10.1186/s40323-020-00178-x

Programming Viscosity in Silicone Oils: Reversible Tuning of Rheological Properties in 9-Anthracene Ester-Terminated Polydimethylsiloxanes
Gäbert, C.; Rosenstingl, T.; Linsler, D.; Dienwiebel, M.; Reinicke, S.
2020. ACS applied polymer materials, 2 (12), 5460–5468. doi:10.1021/acsapm.0c00794

Multiphase-field modelling of crack propagation in geological materials and porous media with Drucker-Prager plasticity
Späth, M.; Herrmann, C.; Prajapati, N.; Schneider, D.; Schwab, F.; Selzer, M.; Nestler, B.
2020. Computational geosciences, 25 (1), 325–343. doi:10.1007/s10596-020-10007-0

Traceable Lateral Force Calibration (TLFC) for Atomic Force Microscopy
Bhattacharjee, A.; Garabedian, N. T.; Evans, C. L.; Burris, D. L.
2020. Tribology letters, 68 (4), Art.-Nr.: 111. doi:10.1007/s11249-020-01349-y

Electrochemical Performance of Carbon Modified LiNiPO as Li-Ion Battery Cathode: A Combined Experimental and Theoretical Study
Nasir, M. H.; Janjua, N. K.; Santoki, J.
2020. Journal of the Electrochemical Society, 167 (13), 130526. doi:10.1149/1945-7111/abb83d

Variation of the frictional anisotropy on ventral scales of snakes caused by nanoscale steps
Wu, W.; Yu, S.; Schreiber, P.; Dollmann, A.; Lutz, C.; Gomard, G.; Greiner, C.; Hölscher, H.
2020. Bioinspiration & biomimetics, 15 (5), Art.-Nr.: 056014. doi:10.1088/1748-3190/ab9e51

Bad Nodes Considered Harmful: How to Find and Fix the Problem
Seiz, M.; Hötzer, J.; Hierl, H.; Andersson, S.; Nestler, B.
2020. Sustained Simulation Performance 2018 and 2019 – Proceedings of the Joint Workshops on Sustained Simulation Performance, University of Stuttgart (HLRS) and Tohoku University, 2018 and 2019. Ed.: M. Resch, 123–130, Springer International Publishing. doi:10.1007/978-3-030-39181-2_11

Automated Quantitative Analyses of Fatigue-Induced Surface Damage by Deep Learning
Thomas, A.; Durmaz, A. R.; Straub, T.; Eberl, C.
2020. Materials, 13 (15), Article: 3298. doi:10.3390/ma13153298

Tribological performance and microstructural evolution of α-brass alloys as a function of zinc concentration
Liu, Z.; Messer-Hannemann, P.; Laube, S.; Greiner, C.
2020. Friction, 8, 1117–1136. doi:10.1007/s40544-019-0345-8

Microstructural changes in CoCrFeMnNi under mild tribological load
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Haug, C.; Greiner, C.
2020. Journal of materials science, 55 (26), 12353–12372. doi:10.1007/s10853-020-04806-0

Weakly supervised one shot segmentation
Raza, H.; Ravanbakhsh, M.; Klein, T.; Nabi, M.
2020. 2019 IEEE/CVF International Conference on Computer Vision Workshop (ICCVW), 1401–1406, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICCVW.2019.00176

Brittle anisotropic fracture propagation in quartz sandstone: insights from phase-field simulations
Prajapati, N.; Herrmann, C.; Späth, M.; Schneider, D.; Selzer, M.; Nestler, B.
2020. Computational geosciences, 24, 1361–1376. doi:10.1007/s10596-020-09956-3

On counting cells in open pore foams
August, A.; Nestler, B.
2020. Engineering Research Express, 2 (2), Art. Nr.: 025029. doi:10.1088/2631-8695/ab8c94

Nondestructive evaluation of 3D microstructure evolution in strontium titanate
Trenkle, A.; Syha, M.; Rheinheimer, W.; Callahan, P. G.; Nguyen, L.; Ludwig, W.; Lenthe, W.; Echlin, M. P.; Pollock, T. M.; Weygand, D.; Graef, M.; Hoffmann, M. J.; Gumbsch, P.
2020. Journal of applied crystallography, 53, 349–359. doi:10.1107/S160057672000093X

Pattern formation during deformation of metallic nanolaminates
Gola, A.; Schwaiger, R.; Gumbsch, P.; Pastewka, L.
2020. Physical review materials, 4 (1), Art.-Nr. 013603. doi:10.1103/PhysRevMaterials.4.013603

Synergistic effects of antiwear and friction modifier additives
Eickworth, J.; Aydin, E.; Dienwiebel, M.; Rühle, T.; Wilke, P.; Umbach, T. R.
2020. Industrial lubrication & tribology, 72 (8), 1019–1025. doi:10.1108/ILT-07-2019-0293

Morphological characterization and photocatalytic efficiency measurements of pure silica transparent open‐cell sponges coated with TiO₂
Löffler, F. B.; Altermann, F. J.; Bucharsky, E. C.; Schell, K. G.; Vera, M. L.; Traid, H.; Dwojak, A.; Litter, M. I.
2020. International journal of applied ceramic technology, 17 (4), 1930–1939. doi:10.1111/ijac.13504

Interface tracking characteristics of color-gradient lattice Boltzmann model for immiscible fluids
Subhedar, A.; Reiter, A.; Selzer, M.; Varnik, F.; Nestler, B.
2020. Physical review / E, 101 (1), Article: 013313. doi:10.1103/PhysRevE.101.013313

About the surface area to volume relations of open cell foams
August, A.; Nestler, B.
2020. Engineering Research Express, 2 (1), Article No.015021. doi:10.1088/2631-8695/ab6ac6

Microstructural coarsening of multicomponent multiphase polycrystalline materials. PhD dissertation
Perumal, R.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000105110

The non-steady-state growth of divergent pearlite in Fe–C–Mn steels: a phase-field investigation
Mushongera, L. T.; Amos, P. G. K.; Schoof, E.; Kumar, P.; Nestler, B.
2020. Journal of materials science, 55, 5280–5295. doi:10.1007/s10853-019-04307-9

Limitations of preserving volume in Allen-Cahn framework for microstructural analysis
Kubendran Amos, P. G.; Schoof, E.; Santoki, J.; Schneider, D.; Nestler, B.
2020. Computational materials science, 173, Article No.109388. doi:10.1016/j.commatsci.2019.109388

Entwicklung einer Kontinuumsbeschreibung für die Versetzungsmobilität in Versetzungsnetzwerken. PhD dissertation
Sudmanns, M.
2020. KIT Scientific Publishing. doi:10.5445/KSP/1000100534

Phase-field study of eutectic colony formation in NiAl-34Cr
Kellner, M.; Hötzer, J.; Schoof, E.; Nestler, B.
2020. Acta materialia, 182, 267–277. doi:10.1016/j.actamat.2019.10.028

Structure evolution in tribological interfaces studied by multilayer model alloys. PhD dissertation
Cihan, E.
2020. KIT Scientific Publishing. doi:10.5445/KSP/1000100033

Recrystallisation towards a single texture component in heavily cold rolled tungsten (W) sheets and its impact on micromechanics
Reiser, J.; Bonnekoh, C.; Karcher, T.; Pfleging, W.; Weygand, D.; Hoffmann, A.
2020. International journal of refractory metals & hard materials, 86, Article: 105084. doi:10.1016/j.ijrmhm.2019.105084

A Stochastic Study of Flow Anisotropy and Channelling in Open Rough Fractures
Marchand, S.; Mersch, O.; Selzer, M.; Nitschke, F.; Schoenball, M.; Schmittbuhl, J.; Nestler, B.; Kohl, T.
2020. Rock mechanics and rock engineering, 53, 233–249. doi:10.1007/s00603-019-01907-4

Influence of melt convection on the morphological evolution of seaweed structures: Insights from phase-field simulations
Pavan Laxmipathy, V.; Wang, F.; Selzer, M.; Nestler, B.; Ankit, K.
2019. Computational materials science, 170, Art.-Nr. 109196. doi:10.1016/j.commatsci.2019.109196

Structural and elastic properties of amorphous carbon from simulated quenching at low rates
Jana, R.; Savio, D.; Deringer, V. L.; Pastewka, L.
2019. Modelling and simulation in materials science and engineering, 27 (8), Art.-Nr. 085009. doi:10.1088/1361-651X/ab45da

Formation of the third bodies of steel sliding against brass under lubricated conditions
Liu, L.; Sheng, Y.; Liu, M.; Dienwiebel, M.; Zhang, Z.; Dastan, D.
2019. Tribology international, 140, Article no: 105727. doi:10.1016/j.triboint.2019.04.011

Low friction of metallic multilayers by formation of a shear-induced alloy
Cihan, E.; Störmer, H.; Leiste, H.; Stüber, M.; Dienwiebel, M.
2019. Scientific reports, 9 (1), 9480. doi:10.1038/s41598-019-45734-7

Dislocation multiplication by cross-slip and glissile reaction in a dislocation based continuum formulation of crystal plasticity
Sudmanns, M.; Stricker, M.; Weygand, D.; Hochrainer, T.; Schulz, K.
2019. Journal of the mechanics and physics of solids, 132, Art. Nr.: 103695. doi:10.1016/j.jmps.2019.103695

Correction to: Fatigue assessment of the welded joints containing process relevant imperfections
Javaheri, E.; Hemmesi, K.; Tempel, P.; Fenzl, R.; Farajian, M.
2019. Welding in the world, 63 (6), 1903. doi:10.1007/s40194-019-00782-5

Droplets on chemically patterned surface: A local free-energy minima analysis
Wu, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Physical review / E, 100 (4), Art.Nr. 041102. doi:10.1103/PhysRevE.100.041102

Correlations of non-affine displacements in metallic glasses through the yield transition
Jana, R.; Pastewka, L.
2019. Journal of Physics: Materials, 2 (4), 045006. doi:10.1088/2515-7639/ab36ed

Tailoring the characteristic length scale of 3D chiral mechanical metamaterials
Ziemke, P.; Frenzel, T.; Wegener, M.; Gumbsch, P.
2019. Extreme mechanics letters, 32, Art:nr. 100553. doi:10.1016/j.eml.2019.100553

Application of Gaussian process autoregressive models for capturing the time evolution of microstructure statistics from phase-field simulations for sintering of polycrystalline ceramics
Yabansu, Y. C.; Rehn, V.; Hötzer, J.; Nestler, B.; Kalidindi, S. R.
2019. Modelling and simulation in materials science and engineering, 27 (8), Art.-Nr. 084006. doi:10.1088/1361-651X/ab413e

Heavy flavour identification at CMS
Tiwari, P. C.
2019. Proceedings of The 39th International Conference on High Energy Physics — PoS(ICHEP2018), 39th International Conference on High Energy Physics (2018) Seoul, Südkorea, 04.07.2018–11.07.2018, 898, Scuola Internazionale Superiore di Studi Avanzati (SISSA). doi:10.22323/1.340.0898

Non-Arrhenius grain growth in strontium titanate: Quantification of bimodal grain growth
Rheinheimer, W.; Schoof, E.; Selzer, M.; Nestler, B.; Hoffmann, M. J.
2019. Acta materialia, 174, 105–115. doi:10.1016/j.actamat.2019.05.040

Progress Report on Phase Separation in Polymer Solutions
Wang, F.; Altschuh, P.; Ratke, L.; Zhang, H.; Selzer, M.; Nestler, B.
2019. Advanced materials, 31 (26), Art.Nr. 1806733. doi:10.1002/adma.201806733

Investigation of Equilibrium Droplet Shapes on Chemically Striped Patterned Surfaces Using Phase-Field Method
Wu, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Langmuir, 35 (25), 8500–8516. doi:10.1021/acs.langmuir.9b01362

Solids Under Extreme Shear: Friction-Mediated Subsurface Structural Transformations
Greiner, C.; Gagel, J.; Gumbsch, P.
2019. Advanced materials, 31 (26), Art.Nr.: 1806705. doi:10.1002/adma.201806705

New Twists of 3D Chiral Metamaterials
Fernandez-Corbaton, I.; Rockstuhl, C.; Ziemke, P.; Gumbsch, P.; Albiez, A.; Schwaiger, R.; Frenzel, T.; Kadic, M.; Wegener, M.
2019. Advanced materials, 31 (26), Art.Nr. 1807742. doi:10.1002/adma.201807742

Message from the Editorial Chairman
Dienwiebel, M.
2019. Wear, (Part A), 426–427. doi:10.1016/j.wear.2019.04.010

Fatigue assessment of the welded joints containing process relevant imperfections
Javaheri, E.; Hemmesi, K.; Tempel, P.; Farajian, M.
2019. Welding in the world, 63 (2), 249–261. doi:10.1007/s40194-018-00676-y

On the multiphase-field modeling of martensitic phase transformation in dual-phase steel using J2-viscoplasticity
Schoof, E.; Herrmann, C.; Streichhan, N.; Selzer, M.; Schneider, D.; Nestler, B.
2019. Modelling and simulation in materials science and engineering, 27 (2), 025010. doi:10.1088/1361-651X/aaf980

Glass formation by severe plastic deformation of crystalline Cu|Zr nano-layers
Li, S.; Pastewka, L.; Gumbsch, P.
2019. Acta materialia, 165, 577–586. doi:10.1016/j.actamat.2018.11.045

A gradient plasticity creep model accounting for slip transfer/activation at interfaces evaluated for the intermetallic NiAl-9Mo
Albiez, J.; Erdle, H.; Weygand, D.; Böhlke, T.
2019. International journal of plasticity, 113, 291–311. doi:10.1016/j.ijplas.2018.10.006

DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber, C.; Wong, S. L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.; Friák, M.; Fujita, N.; Grilli, N.; Janssens, K. G. F.; Jia, N.; Kok, P. J. J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.
2019. Computational materials science, 158, 420–478. doi:10.1016/j.commatsci.2018.04.030

Carbon Nanofibers: Locally Controlled Growth of Individual Lambda-Shaped Carbon Nanofibers
Lutz, C.; Bog, U.; Loritz, T.; Syurik, J.; Malik, S.; Kumar, C. N. S.; Kübel, C.; Bruns, M.; Greiner, C.; Hirtz, M.; Hölscher, H.
2019. Small, 15 (7), 1970036. doi:10.1002/smll.201970036

Research. Experience. Education : 9th Conference on Learning Factories 2019 (CLF 2019), Braunschweig, Germany
Herrmann, C.; Thiede, S. (Eds.)
2019. Elsevier

Phase-field study of microstructure evolution in directionally solidified NiAl-34Cr during dynamic velocity changes
Kellner, M.; Steinmetz, P.; Hötzer, J.; Nestler, B.; Dargahi Noubary, K.; Kunz, W.
2019. Solidification processing 2017 : proceedings of the 6th Decennial International Conference on Solidification Processing : 25-28 July 2017, Beaumont Estate, Old Windsor, UK / SP 17 ; edited by Z. Fan, 372–375, BCAST

On the Volume-Diffusion Governed Termination-Migration Assisted Globularization in Two-Phase Solid-State Systems: Insights from Phase-Field Simulations
Amos, P. G. K.; Schoof, E.; Schneider, D.; Nestler, B.
2019. Proceedings of the 1st International Conference on Numerical Modelling in Engineering – Volume 2: Numerical Modelling in Mechanical and Materials Engineering, NME 2018, 28-29 August 2018, Ghent University, Belgium. Ed.: M. Abdel Wahab, 47–63, Springer. doi:10.1007/978-981-13-2273-0_5

Phase-Field Study of Electromigration-Induced Shape Evolution of a Transgranular Finger-Like Slit
Santoki, J.; Mukherjee, A.; Schneider, D.; Selzer, M.; Nestler, B.
2019. Journal of electronic materials, 48 (1), 182–193. doi:10.1007/s11664-018-6619-5

Code generation for massively parallel phase-field simulations
Bauer, M.; Hötzer, J.; Ernst, D.; Hammer, J.; Seiz, M.; Hierl, H.; Hönig, J.; Köstler, H.; Wellein, G.; Nestler, B.; Rüde, U.
2019. SC ’19: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis, Art.-Nr.: a59, Association for Computing Machinery (ACM). doi:10.1145/3295500.3356186

Probabilistic fracture mechanics framework including crack nucleation of rotor forging flaws
Radaelli, F.; Kadau, K.; Amann, C.; Gumbsch, P.
2019. ASME Turbo Expo 2019 : Turbomachinery Technical Conference and Exposition, Phoenix, AZ, June 17-21, 2019, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2019-90418

On the Characterization and Modeling of Interfaces in Fiber Reinforced Polymer Structures. PhD dissertation
Schober, M.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000100455

A bottom-up continuum approach of crystal plasticity for the analysis of fcc microwires under torsion
Zoller, K.; Schulz, K.
2019. Proceedings in applied mathematics and mechanics, 19 (1), Art.Nr. e201900032. doi:10.1002/pamm.201900032

Entwicklung einer Kontinuumsbeschreibung für die Versetzungsmobilität in Versetzungsnetzwerken. PhD dissertation
Sudmanns, M.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000100071

Role of conductivity on the electromigration-induced morphological evolution of inclusions in {110}-oriented single crystal metallic thin films
Santoki, J.; Mukherjee, A.; Schneider, D.; Nestler, B.
2019. Journal of applied physics, 126 (16), Article No.165305. doi:10.1063/1.5119714

Understanding the influence of neighbours on the spheroidization of finite 3-dimensional rods in a lamellar arrangement: Insights from phase-field simulations
Mittnacht, T.; Amos, P. G. K.; Schneider, D.; Nestler, B.
2019. Proceedings of the 1st International Conference on Numerical Modelling in Engineering : NME 2018, 28-29 August 2018, Ghent, Belgium. Ed.: M. Abdel Wahab, 290–299, Springer. doi:10.1007/978-981-13-2273-0_23

Structure evolution in tribological interfaces studied by multilayer model alloys. PhD dissertation
Cihan, E.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000099513

Post-buckling and dynamic response of angled struts in elastic lattices
Wehmeyer, S.; Zok, F. W.; Eberl, C.; Gumbsch, P.; Cohen, N.; McMeeking, R. M.; Begley, M. R.
2019. Journal of the mechanics and physics of solids, 133, 103693. doi:10.1016/j.jmps.2019.103693

Phase-field investigation on the growth orientation angle of aluminum carbide with a needle-like structure at the surface of graphite particles
Cai, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Modelling and simulation in materials science and engineering, 27 (6), Art.-Nr.: 065010. doi:10.1088/1361-651X/ab2351

Comparison of K-doped and pure cold-rolled tungsten sheets: As-rolled condition and recrystallization behaviour after isochronal annealing at different temperatures
Lied, P.; Bonnekoh, C.; Pantleon, W.; Stricker, M.; Hoffmann, A.; Reiser, J.
2019. International journal of refractory metals & hard materials, 85, 105047. doi:10.1016/j.ijrmhm.2019.105047

Dislocation multiplication by cross-slip and glissile reaction in a dislocation based continuum formulation of crystal plasticity
Sudmanns, M.; Stricker, M.; Weygand, D.; Hochrainer, T.; Schulz, K.
2019. Journal of the mechanics and physics of solids, 132, 103695

Reaction and characterisation of a two-stage thermoset using molecular dynamics
Schwab, F. K.; Denniston, C.
2019. Polymer chemistry, 10 (32), 4413–4427. doi:10.1039/c9py00521h

Data-driven crack assessment based on surface measurements
Schulz, K.; Kreis, S.; Trittenbach, H.; Böhm, K.
2019. Engineering fracture mechanics, 218, Article no: 106552. doi:10.1016/j.engfracmech.2019.106552

Curing Simulations of a Fibre-Reinforced Thermoset on a Micro- and Nano-Scale. PhD dissertation
Schwab, F. K.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096963

Surface flaws control strain localization in the deformation of Cu|Au nanolaminate pillars
Gola, A.; Zhang, G.-P.; Pastewka, L.; Schwaiger, R.
2019. MRS communications, 9 (3), 1067–1071. doi:10.1557/mrc.2019.93

Theoretical and numerical investigations of rod growth of an Ni–Zr eutectic alloy
Enugala, S. N.; Kellner, M.; Kobold, R.; Hötzer, J.; Kolbe, M.; Nestler, B.; Herlach, D.
2019. Journal of materials science, 54 (19), 12605–12622. doi:10.1007/s10853-019-03802-3

Die tribologischen Eigenschaften Silicium-basierter Keramiken in Isooctan unter Berücksichtigung der Umgebungsatmosphäre. PhD dissertation
Schreiber, P. J.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096643

Electric field-induced directed assembly of diblock copolymers and grain boundary grooving in metal interconnects. PhD dissertation
Mukherjee, A.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096625

Mesoscale Simulation of Dislocation Microstructures at Internal Interfaces
Schulz, K.; Sudmanns, M.
2019. High Performance Computing in Science and Engineering’18 : Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2018. Ed.: W.E. Nagel, 115–129, Springer. doi:10.1007/978-3-030-13325-2_7

A mesoscale continuum approach of dislocation dynamics and the approximation by a Runge-Kutta discontinuous Galerkin method
Schulz, K.; Wagner, L.; Wieners, C.
2019. International journal of plasticity, 120, 248–261. doi:10.1016/j.ijplas.2019.05.003

Investigation of the microstructure adjustment by velocity variations during the directional solidification of Al-Ag-Cu with the phase-field method
Hötzer, J.; Kellner, M.; Kunz, W.; Nestler, B.
2019. Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) 17–21 June 2019, Salzburg, Austria, Article No.012007, Institute of Physics Publishing Ltd (IOP Publishing Ltd). doi:10.1088/1757-899X/529/1/012007

Impact of in situ nanomechanics on physical metallurgy
Kacher, J.; Kirchlechner, C.; Michler, J.; Polatidis, E.; Schwaiger, R.; Van Swygenhoven, H.; Taheri, M.; Legros, M.
2019. MRS bulletin, 44 (6), 465–470. doi:10.1557/mrs.2019.124

Insights into tribology from in situ nanoscale experiments
Jacobs, T. D. B.; Greiner, C.; Wahl, K. J.; Carpick, R. W.
2019. MRS bulletin, 44 (6), 478–486. doi:10.1557/mrs.2019.122

Phase-field study of grain growth in porous polycrystals
Rehn, V.; Hötzer, J.; Rheinheimer, W.; Seiz, M.; Serr, C.; Nestler, B.
2019. Acta materialia, 174, 439–449. doi:10.1016/j.actamat.2019.05.059

Scratching Cu|Au nanolaminates
Gola, A.; Pastewka, L.
2019. Lubricants, 7 (5), Art. Nr.: 44. doi:10.3390/lubricants7050044

Multiphase-Field Modeling and Simulation of Martensitic Phase Transformation in Heterogeneous Materials
Schoof, E.; Herrmann, C.; Schneider, D.; Hötzer, J.; Nestler, B.
2019. High Performance Computing in Science and Engineering ’18. Ed.: W. Nagel, 475–488, Springer International Publishing. doi:10.1007/978-3-030-13325-2_30

Understanding the volume-diffusion governed shape-instabilities in metallic systems. PhD dissertation
Kubendran Amos, P. G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000095355

Phase-field study on the growth of magnesium silicide occasioned by reactive diffusion on the surface of Si-foams
Wang, F.; Altschuh, P.; Matz, A. M.; Heimann, J.; Matz, B. S.; Nestler, B.; Jost, N.
2019. Acta materialia, 170, 138–154. doi:10.1016/j.actamat.2019.03.008

Analysis of dislocation microstructure characteristics of surface grains under cyclic loading by discrete dislocation dynamics
El Achkar, T.; Weygand, D.
2019. Modelling and simulation in materials science and engineering, 27 (5), Art.-Nr.: 055004. doi:10.1088/1361-651X/ab1b7c

Auswirkungen von Dehnrate und lokaler Temperaturentwicklung auf das Crashverhalten langfaser-verstärkter Thermoplaste. PhD dissertation
Lienhard, J.
2019. Fraunhofer Verlag

Mikrostrukturentwicklung unter reversierender Reibbelastung bei variierender elastischer und plastischer Dehnung. PhD dissertation
Becker, S.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093966

Modern Times need Enlightened Innovation and Sophisticated Materials
Kneer, A.; Wirtz, M.; Yurtsever-Kneer, S.; Barbe, S.; August, A.
2019. Galvanotechnik, 2019 (4), 712–719

Extension of Jackson-Hunt analysis for curved solid-liquid interfaces
Nani, E. S.; Nestler, B.
2019. Journal of crystal growth, 512, 230–240. doi:10.1016/j.jcrysgro.2019.01.025

Physikalisch basierte mehrskalige Simulation der additiv gefertigten Nickel-Legierung Inconel 718. PhD dissertation
Maiwald-Immer, T.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091992

Atomistic insights into lubricated tungsten/diamond sliding contacts
Romero, P. A.; Mayrhofer, L.; Stoyanov, P.; Merz, R.; Kopnarski, M.; Dienwiebel, M.; Moseler, M.
2019. Frontiers in mechanical engineering. doi:10.3389/fmech.2019.00006

Tribological behavior of nanosecond-laser surface textured Ti6Al4V
Kümmel, D.; Hamann-Schroer, M.; Hetzner, H.; Schneider, J.
2019. Wear, 422-423, 261–268. doi:10.1016/j.wear.2019.01.079

Liquid superlubricity obtained for self-mated silicon carbide in nonaqueous low-viscosity fluid
Schreiber, P. J.; Schneider, J.
2019. Tribology international, 134, 7–14. doi:10.1016/j.triboint.2019.01.031

Deformation of metallic multilayers: an atomistic study of the relationship between structure and deformation mechanisms. PhD dissertation
Gola, A.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091026

Evolution of the True Contact Area of Laser Textured Tungsten Under Dry Sliding Conditions
Lechthaler, B.; Ochs, G.; Mücklich, F.; Dienwiebel, M.
2019. Frontiers in mechanical engineering, 5, Article no 3. doi:10.3389/fmech.2019.00003

A scalable and extensible checkpointing scheme for massively parallel simulations
Kohl, N.; Hötzer, J.; Schornbaum, F.; Bauer, M.; Godenschwager, C.; Köstler, H.; Nestler, B.; Rüde, U.
2019. The international journal of high performance computing applications, 33 (4), 571–589. doi:10.1177/1094342018767736

Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition
Kubendran Amos, P. G.; Schoof, E.; Streichan, N.; Schneider, D.; Nestler, B.
2019. Computational materials science, 159, 281–296. doi:10.1016/j.commatsci.2018.12.023

A bionic approach for heat generation and latent heat storage inspired by the polar bear
August, A.; Kneer, A.; Reiter, A.; Wirtz, M.; Sarsour, J.; Stegmaier, T.; Barbe, S.; Gresser, G. T.; Nestler, B.
2019. Energy, 168, 1017–1030. doi:10.1016/j.energy.2018.11.143

Concurrent grain growth and coarsening of two-phase microstructures; large scale phase-field study
Perumal, R.; Selzer, M.; Nestler, B.
2019. Computational materials science, 159, 160–176. doi:10.1016/j.commatsci.2018.12.017

Untersuchung von charakteristischen Versetzungsstrukturen und Versetzungstransportprozessen in Reibkontakten mit Versetzungsdynamik-Simulationen. PhD dissertation
Gagel, J.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000088231

A mechanism-based homogenization of a dislocation source model for bending
Schmitt, S.; Stricker, M.; Gumbsch, P.; Schulz, K.
2019. Acta materialia, 164, 663–672. doi:10.1016/j.actamat.2018.11.013

Charakterisierung und Modellierung von instabilen Metamaterialien. PhD dissertation
Findeisen, C.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000087932

Phase-field simulation of solid state sintering
Hötzer, J.; Seiz, M.; Kellner, M.; Rheinheimer, W.; Nestler, B.
2019. Acta materialia, 164, 184–195. doi:10.1016/j.actamat.2018.10.021

The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature
Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Leiste, H.; Hartmaier, A.; Weygand, D.; Hoffmann, A.; Reiser, J.
2019. International journal of refractory metals & hard materials, 78, 146–163. doi:10.1016/j.ijrmhm.2018.09.010

Multiphase-field model of small strain elasto-plasticity according to the mechanical jump conditions
Herrmann, C.; Schoof, E.; Schneider, D.; Schwab, F.; Reiter, A.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 62 (6), 1399–1412. doi:10.1007/s00466-018-1570-0

Multiobjective Reinforcement Learning for Reconfigurable Adaptive Optimal Control of Manufacturing Processes
Dornheim, J.; Link, N.
2018. 2018 13th International Symposium on Electronics and Telecommunications (ISETC), Article no: 8583854, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISETC.2018.8583854

Chemo-elastic phase-field simulation of the cooperative growth of mutually-accommodating Widmanstätten plates
Kubendran Amos, P. G.; Schoof, E.; Schneider, D.; Nestler, B.
2018. Journal of alloys and compounds, 767, 1141–1154. doi:10.1016/j.jallcom.2018.07.138

Discrete Dislocation Dynamics simulations of dislocation transport during sliding
Gagel, J.; Weygand, D.; Gumbsch, P.
2018. Acta materialia, 156, 215–227. doi:10.1016/j.actamat.2018.06.002

The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
2018. Scripta materialia, 153, 63–67. doi:10.1016/j.scriptamat.2018.04.048

An elasto-chemical phase-field model for isotropic solids
Tschukin, O.; Schneider, D.; Nestler, B.
2018. European journal of mechanics / A, 73, 181–191. doi:10.1016/j.euromechsol.2018.06.014

Evaporation rate analysis of capillaries with polygonal cross-section
Schweigler, K. M.; Seifritz, S.; Selzer, M.; Nestler, B.
2018. International journal of heat and mass transfer, 121, 943–951. doi:10.1016/j.ijheatmasstransfer.2017.12.090

Numerical and experimental investigation of texture shape and position in the macroscopic contact
Codrignani, A.; Frohnapfel, B.; Magagnato, F.; Schreiber, P.; Schneider, J.; Gumbsch, P.
2018. Tribology international, 122, 46–57. doi:10.1016/j.triboint.2018.02.001

Study of pattern selection in 3D phase-field simulations during the directional solidification of ternary eutectic Al-Ag-Cu
Steinmetz, P.; Hötzer, J.; Kellner, M.; Genau, A.; Nestler, B.
2018. Computational materials science, 148, 131–140. doi:10.1016/j.commatsci.2018.02.040

Nanocomposites: Glassomer-Processing Fused Silica Glass Like a Polymer (Adv. Mater. 22/2018) [Nur Titelseite]
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), Art.Nr. 1870151. doi:10.1002/adma.201870151

Glassomer-Processing Fused Silica Glass Like a Polymer
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), 1707100. doi:10.1002/adma.201707100

The parallel multi-physics phase-field framework PACE3D
Hötzer, J.; Reiter, A.; Hierl, H.; Steinmetz, P.; Selzer, M.; Nestler, B.
2018. Journal of computational science, 26, 1–12. doi:10.1016/j.jocs.2018.02.011

Phase-field study of the transient phenomena induced by ’abnormally’ large grains during 2-dimensional isotropic grain growth
Perumal, R.; Kubendran Amos, P. G.; Selzer, M.; Nestler, B.
2018. Computational materials science, 147, 227–237. doi:10.1016/j.commatsci.2018.02.028

Phase-field study of dynamic velocity variations during directional solidification of eutectic NiAl-34Cr
Kellner, M.; Kunz, W.; Steinmetz, P.; Hötzer, J.; Nestler, B.
2018. Computational materials science, 145, 291–305. doi:10.1016/j.commatsci.2017.12.053

Crystal-melt interface mobility in bcc Fe: Linking molecular dynamics to phase-field and phase-field crystal modeling
Guerdane, M.; Berghoff, M.
2018. Physical review / B, 97 (14), 144105. doi:10.1103/PhysRevB.97.144105

Experimental Investigations on Pressure Loss and Heat Transfer of Two-Phase Carbon Dioxide Flow in a Horizontal Circular Pipe of 0.4 mm Diameter
Kneer, A.; Wirtz, M.; Laufer, T.; Nestler, B.; Barbe, S.
2018. International journal of heat and mass transfer, 119, 828–840. doi:10.1016/j.ijheatmasstransfer.2017.11.146

Phase-field analysis of volume-diffusion controlled shape-instabilities in metallic systems-II: Finite 3-dimensional rods
Kubendran Amos, P. G.; Mushongera, L. T.; Mittnacht, T.; Nestler, B.
2018. Computational materials science, 144, 374–385. doi:10.1016/j.commatsci.2017.12.046

Phase-field analysis of volume-diffusion controlled shape-instabilities in metallic systems-I: 2-Dimensional plate-like structures
Kubendran Amos, P. G.; Mushongera, L. T.; Nestler, B.
2018. Computational materials science, 144, 363–373. doi:10.1016/j.commatsci.2017.12.045

Multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure
Schoof, E.; Schneider, D.; Streichhan, N.; Mittnacht, T.; Selzer, M.; Nestler, B.
2018. International journal of solids and structures, 134, 181–194. doi:10.1016/j.ijsolstr.2017.10.032

Phase-field modeling of reactive wetting and growth of the intermetallic Al2 Au phase in the Al-Au system
Wang, F.; Reiter, A.; Kellner, M.; Brillo, J.; Selzer, M.; Nestler, B.
2018. Acta materialia, 146, 106–118. doi:10.1016/j.actamat.2017.12.015

Correction to: Small strain multiphase-field model accounting for configurational forces and mechanical jump conditions
Schneider, D.; Schoof, E.; Tschukin, O.; Reiter, A.; Herrmann, C.; Schwab, F.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 61 (3), 297. doi:10.1007/s00466-017-1485-1

Small strain multiphase-field model accounting for configurational forces and mechanical jump conditions
Schneider, D.; Schoof, E.; Tschukin, O.; Reiter, A.; Herrmann, C.; Schwab, F.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 61 (3), 277–295. doi:10.1007/s00466-017-1458-4

Contact mechanics of graphene-covered metal surfaces
Klemenz, A.; Gola, A.; Moseler, M.; Pastewka, L.
2018. Applied physics letters, 112 (6), Art. Nr.: 061601. doi:10.1063/1.5006770

Quantitative Comparison of Ternary Eutectic Phase-Field Simulations with Analytical 3D Jackson–Hunt Approaches
Steinmetz, P.; Kellner, M.; Hötzer, J.; Nestler, B.
2018. Metallurgical and materials transactions / B, 49 (1), 213–224. doi:10.1007/s11663-017-1142-2

Experimental and Simulative Modeling of Drilling Processes for the Compensation of Thermal Effects
Bollig, P.; Michna, J.; Faltin, C.; Schneider, J.; Zanger, F.; Schießl, R.; Maas, U.; Schulze, V.
2018. Thermal Effects in Complex Machining Processes. Hrsg.: D. Biermann, F. Hollmann, 145–180, Springer International Publishing. doi:10.1007/978-3-319-57120-1_9

The Impact of Pores on Microstructure Evolution: A Phase-Field Study of Pore-Grain Boundary Interaction
Rehn, V.; Hötzer, J.; Kellner, M.; Seiz, M.; Serr, C.; Rheinheimer, W.; Hoffmann, M. J.; Nestler, B.
2018. High Performance Computing in Science and Engineering ’ 17: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2017. Ed.: W. Nagel, 485–502, Springer International Publishing. doi:10.1007/978-3-319-68394-2_29

Groundwater remediation – numerical models and experiments
Nestler, B.; Kellner, M.; Hötzer, J.; Kunz, W.
2018. Forschung aktuell, 59–63

Surface texturing of TiAl6V4 using cutting tools in reverse
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia manufacturing, 18, 97–103. doi:10.1016/j.promfg.2018.11.013

Influence of cutting edge asymmetry on grain refinement of Ti6Al4V
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia CIRP, 71, 232–237. doi:10.1016/j.procir.2018.05.065

Bestimmung der plastischen Anisotropie von Blechwerkstoffen durch ortsaufgelöste Simulationen auf Gefügeebene. PhD dissertation
Pagenkopf, J.
2018. Fraunhofer Verlag

Towards Simulation-Data Science : A Case Study on Material Failures
Trittenbach, H.; Gauch, M.; Böhm, K.; Schulz, K.
2018. IEEE 5th International Conference on Data Science and Advanced Analytics (DSAA), Turin, Italy, 1-3 Oct. 2018, 450–459, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DSAA.2018.00058

Shear melting of silicon and diamond and the disappearance of the polyamorphic transition under shear
Moras, G.; Klemenz, A.; Reichenbach, T.; Gola, A.; Uetsuka, H.; Moseler, M.; Pastewka, L.
2018. Physical review materials, 2 (8), Art. Nr.: 083601. doi:10.1103/PhysRevMaterials.2.083601

Three-Dimensional Phase-Field Investigation of Pore Space Cementation and Permeability in Quartz Sandstone
Prajapati, N.; Selzer, M.; Nestler, B.; Busch, B.; Hilgers, C.; Ankit, K.
2018. Journal of geophysical research / Solid earth, 123 (8), 6378–6396. doi:10.1029/2018JB015618

Phasenfeldmodellierung und Simulation des Benetzungsverhaltens von Flüssigkeiten auf festen Oberflächen. PhD dissertation
Ben Said, M.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000088551

Simulation of the Effect of Ultrasound on the Dislocation Structure of Deformed Polycrystals
Murzaev, R. T.; Bachurin, D. V.; Nazarov, A. A.
2018. The physics of metals and metallography, 119 (10), 993–1003. doi:10.1134/S0031918X18100101

Discrete dislocation dynamics study of dislocation microstructure during cyclic loading
El-Achkar, T.; Weygand, D.
2018. Fatigue of Materials at Very High Numbers of Loading Cycles. Ed.: H.-J. Christ, 395–416, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-24531-3_18

Modellierung des mechanischen Verhaltens von Stanznietklebverbindungen mit Berücksichtigung der Prozesssimulation. PhD dissertation
Bier, M.
2018. Fraunhofer Verlag

On the transferability of probabilistic fracture mechanics results for scaled 50 Hz and 60 Hz heavy duty gas turbine rotor disks
Amann, C.; Kadau, K.; Gumbsch, P.
2018. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018; Oslo; Norway; 11 June 2018 through 15 June 2018, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2018-75561

Mechanisms of pearlite spheroidization: Insights from 3D phase-field simulations
Amos, P. G. K.; Bhattacharya, A.; Nestler, B.; Ankit, K.
2018. Acta materialia, 161, 400–411. doi:10.1016/j.actamat.2018.09.043

Friction reduction through biologically inspired scale-like laser surface textures
Schneider, J.; Djamiykov, V.; Greiner, C.
2018. Beilstein journal of nanotechnology, 9, 2561–2572. doi:10.3762/bjnano.9.238

Amorphous nickel nanophases inducing ferromagnetism in equiatomic Ni–Ti alloy
Chellali, M. R.; Nandam, S. H.; Li, S.; Fawey, M. H.; Moreno-Pineda, E.; Velasco, L.; Boll, T.; Pastewka, L.; Kruk, R.; Gumbsch, P.; Hahn, H.
2018. Acta materialia, 161, 47–53. doi:10.1016/j.actamat.2018.09.019

Characterization of the microscopic tribological properties of sandfish (Scincus scincus) scales by atomic force microscopy
Wu, W.; Lutz, C.; Mersch, S.; Thelen, R.; Greiner, C.; Gomard, G.; Hölscher, H.
2018. Beilstein journal of nanotechnology, 9, 2618–2627. doi:10.3762/bjnano.9.243

Untersuchung von charakteristischen Versetzungsstrukturen und Versetzungstransportprozessen in Reibkontakten mit Versetzungsdynamik-Simulationen. PhD dissertation
Gagel, J.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000086317

In Situ Digital Holography for 3D Topography Analysis of Tribological Experiments
Martin Dienwiebel; Pantcho Stoyanov
2018. Advanced Analytical Methods in Tribology, 289–305, Springer

Advanced Analytical Methods in Tribology
Dienwiebel, M.; De Barros Bouchet, M.-I. (Eds.)
2018. Springer. doi:10.1007/978-3-319-99897-8

Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
2018. Acta materialia, 161, 138–149. doi:10.1016/j.actamat.2018.09.016

Phase-field study of surface irregularities of a cathode particle during intercalation
Santoki, J.; Schneider, D.; Selzer, M.; Wang, F.; Kamlah, M.; Nestler, B.
2018. Modelling and simulation in materials science and engineering, 26 (6), 065013. doi:10.1088/1361-651X/aad20a

Analyzing the cooperative growth of intermetallic phases with a curved solidification front
Nani, E.; Nestler, B.; Ankit, K.
2018. Acta materialia, 159, 135–149. doi:10.1016/j.actamat.2018.08.017

On the globularization of the shapes associated with alpha-precipitate of two phase titanium alloys: Insights from phase-field simulations
Kubendran Amos, P. G.; Schoof, E.; Schneider, D.; Nestler, B.
2018. Acta materialia, 159, 51–64. doi:10.1016/j.actamat.2018.08.009

Microstructure evolution under tribological loading and its elementary mechanisms. PhD dissertation
Liu, Z.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000085322

Characterization of a macro porous polymer membrane at micron-scale by Confocal-Laser-Scanning Microscopy and 3D image analysis
Ley, A.; Altschuh, P.; Thom, V.; Selzer, M.; Nestler, B.; Vana, P.
2018. Journal of membrane science, 564, 543–551. doi:10.1016/j.memsci.2018.07.062

Graph-based investigation of three-dimensional microstructure rearrangement during ternary eutectic directional solidification of Al-Ag-Cu
Steinmetz, P.; Hötzer, J.; Dennstedt, A.; Serr, C.; Nestler, B.; Genau, A.
2018. Journal of crystal growth, 498, 230–243. doi:10.1016/j.jcrysgro.2018.06.028

Dislocation multiplication in stage II deformation of fcc multi-slip single crystals
Stricker, M.; Sudmanns, M.; Schulz, K.; Hochrainer, T.; Weygand, D.
2018. Journal of the mechanics and physics of solids, 119, 319–333. doi:10.1016/j.jmps.2018.07.003

Tribology of Wire Arc Spray Coatings under the Influence of Regenerative Fuels
Böttcher, R.; Winkler, H.-J.; Dienwiebel, M.; Scherge, M.
2018. Lubricants, 6 (3), 60. doi:10.3390/lubricants6030060

Tribological Effects in and by Metal Cutting
Segebade, E.; Schneider, J.; Schulze, V.
2018. 8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation, ICTMP 2018; Elsinore; Denmark; 24 June 2018 through 26 June 2018. Ed.: N. Bay, 3–24, Trans Tech Publications. doi:10.4028/www.scientific.net/KEM.767.3

Effective Thermal Conductivity of Composite Materials Based on Open Cell Foams
August, A.; Reiter, A.; Kneer, A.; Selzer, M.; Nestler, B.
2018. Heat and Mass Transfer Research Journal, 2 (1), 33–45

Computergestütztes Design gradierter Metallschäume
August, A.; Kneer, A.; Nestler, B.
2018. Forschung aktuell, 2018 (März), 56–58

Modeling fracture cementation processes in calcite limestone: a phase-field study
Prajapati, N.; Selzer, M.; Nestler, B.; Busch, B.; Hilgers, C.
2018. Geothermal Energy, 6 (1), 7. doi:10.1186/s40517-018-0093-4

Stages in the tribologically-induced oxidation of high-purity copper
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
2018. Scripta materialia, 153, 114–117. doi:10.1016/j.scriptamat.2018.05.008

Plastic flow and dislocation strengthening in a dislocation density based formulation of plasticity
Sudmanns, M.; Gumbsch, P.; Schulz, K.
2018. Computational materials science, 151, 317–327. doi:10.1016/j.commatsci.2018.04.065

Entwicklung einer versetzungsbasierten Kontinuumstheorie mittels mechanismusbasierter Homogenisierung. PhD dissertation
Schmitt, S. S.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083074

Perspectives on material modelling: Porous and particle-based microstructures
Nestler, B.; August, A.; Selzer, M.; Hötzer, J.; Kellner, M.; Prajapati, N.; Rehn, V.; Seiz, M.
2018. Ceramic applications, 6 (1), 73–77

Friction and Wear Reduction in Copper with a Gradient Nano-grained Surface Layer
Chen, X.; Han, Z.; Lu, K.
2018. ACS applied materials & interfaces, 10 (16), 13829–13838. doi:10.1021/acsami.8b01205

Phase-field simulations of pearlitic divergence in Fe-C-Mn steels
Mushongera, L. T.; Amos, P. G. K.; Nestler, B.; Ankit, K.
2018. Acta materialia, 150, 78–87. doi:10.1016/j.actamat.2018.02.059

Electromigration-Induced Surface Drift and Slit Propagation in Polycrystalline Interconnects : Insights from Phase-Field Simulations
Mukherjee, A.; Ankit, K.; Selzer, M.; Nestler, B.
2018. Physical review applied, 9 (4), Art.Nr. 044004. doi:10.1103/PhysRevApplied.9.044004

Atomic-scale simulation of structure and mechanical properties of CuAg|Ni multilayer systems
Gola, A.; Gumbsch, P.; Pastewka, L.
2018. Acta materialia, 150, 236–247. doi:10.1016/j.actamat.2018.02.046

Massively Parallel Stencil Code Solver with Autonomous Adaptive Block Distribution
Berghoff, M.; Kondov, I.; Hötzer, J.
2018. IEEE transactions on parallel and distributed systems, 29 (10), 2282–2296. doi:10.1109/TPDS.2018.2819672

Molecular probes reveal deviations from Amontons’ law in multi-asperity frictional contacts
Weber, B.; Suhina, T.; Junge, T.; Pastewka, L.; Brouwer, A. M.; Bonn, D.
2018. Nature Communications, 9 (1), Art.Nr. 888. doi:10.1038/s41467-018-02981-y

Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern. PhD dissertation
Hartweg, M.
2018. Fraunhofer Verlag

Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbean-spruchung bei hohen Temperaturen. PhD dissertation
Hübsch, O.
2018. Fraunhofer Verlag

Discrete-Continuum Transition: A Discussion of the Continuum Limit
Schulz, K.; Schmitt, S.
2018. Technische Mechanik, 38 (1), 126–134. doi:10.24352/UB.OVGU-2018-012

Anatomizing deformation mechanisms in nanocrystalline Pd90Au10
Grewer, M.; Braun, C.; Deckarm, M. J.; Lohmiller, J.; Gruber, P. A.; Honkimäki, V.; Birringer, R.
2017. Mechanics of materials, 114, 254–267. doi:10.1016/j.mechmat.2017.08.010

A fully-printed, BST MIM varactor for low ISM-band matching networks up to 1000 W
Kienemund, D.; Fink, T.; Abrecht, M.; Bigler, W.; Binder, J. R.; Jakoby, R.; Maune, H.
2017. 2017 47th European Microwave Conference (EuMC), Nuremberg, 10–12 October 2017, 1001–1004, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EuMC.2017.8231015

Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses
Hemmesi, K.; Farajian, M.; Fatemi, A.
2017. International journal of fatigue, 101 (Part 2), 271–281. doi:10.1016/j.ijfatigue.2017.01.023

Phase-field simulation of the microstructure evolution in the eutectic NiAl-34Cr system
Kellner, M.; Sprenger, I.; Steinmetz, P.; Hötzer, J.; Nestler, B.; Heilmaier, M.
2017. Computational materials science, 128, 379–387. doi:10.1016/j.commatsci.2016.11.049

A mechanism-based homogenization strategy for the determination of flow stress and strain hardening
Schulz, K.; Sudmanns, M.
2017. Proceedings in applied mathematics and mechanics, 17 (1), 107–110. doi:10.1002/pamm.201710031

Discussion of crack initiation in metal matrix composites
Sudmanns, M.; Schulz, K.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 296–299, Institute for Structural Mechanics

Data-driven crack assessment
Schulz, K.; Verrier, V.; Kreis, S.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 292–295, Institute for Structural Mechanics

Morphological Characterization of the Self-Assembly of Virus Movement Proteins into Nanotubes in the Absence of Virus Particles
Schwan, S.; Ludtka, C.; Friedmann, A.; Cismak, A.; Berthold, L.; Goehre, F.; Kiesow, A.; Heilmann, A.
2017. Advanced biosystems, 1 (12), 1700113. doi:10.1002/adbi.201700113

Analyse geometrieabhängiger Verdunstungsraten in ungesättigter, konvektionsfreier Atmosphäre. PhD dissertation
Schweigler, K. M.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000077924

The Running-in Tribological Behavior of Pb-Free Brass and Its Effect on Microstructural Evolution
Liu, L.; Zhang, Z.; Dienwiebel, M.
2017. Tribology letters, 65 (4), Art.Nr.: 160. doi:10.1007/s11249-017-0943-4

Transparent, abrasion-insensitive superhydrophobic coatings for real-world applications
Helmer, D.; Keller, N.; Kotz, F.; Stolz, F.; Greiner, C.; Nargang, T. M.; Sachsenheimer, K.; Rapp, B. E.
2017. Scientific reports, 7, Art.Nr. 15078. doi:10.1038/s41598-017-15287-8

Concepts of modeling surface energy anisotropy in phase-field approaches
Tschukin, O.; Silberzahn, A.; Selzer, M.; Amos, P. G. K.; Schneider, D.; Nestler, B.
2017. Geothermal Energy, 5 (1), Art.Nr. 19. doi:10.1186/s40517-017-0077-9

Laser textured surfaces for mixed lubrication: Influence of aspect ratio, textured area and dimple arrangement
Schneider, J.; Braun, D. A.; Greiner, C.
2017. Lubricants, 5 (3), Art. Nr.: 32. doi:10.3390/lubricants5030032

Phase-field study on the formation of first-neighbour topological clusters during the isotropic grain growth
Perumal, R.; Kubendran Amos, P. G.; Selzer, M.; Nestler, B.
2017. Computational materials science, 140, 209–223. doi:10.1016/j.commatsci.2017.08.043

Meeting the Contact-Mechanics Challenge
Müser, M. H.; Dapp, W. B.; Bugnicourt, R.; Sainsot, P.; Lesaffre, N.; Lubrecht, T. A.; Persson, B. N. J.; Harris, K.; Bennett, A.; Schulze, K.; Rohde, S.; Ifju, P.; Sawyer, W. G.; Angelini, T.; Ashtari Esfahani, H.; Kadkhodaei, M.; Akbarzadeh, S.; Wu, J.-J.; Vorlaufer, G.; Vernes, A.; Solhjoo, S.; Vakis, A. I.; Jackson, R. L.; Xu, Y.; Streator, J.; Rostami, A.; Dini, D.; Medina, S.; Carbone, G.; Bottiglione, F.; Afferrante, L.; Monti, J.; Pastewka, L.; Robbins, M. O.; Greenwood, J. A.
2017. Tribology letters, 65 (4), Art. Nr.: 118. doi:10.1007/s11249-017-0900-2

Computational modeling of calcite cementation in saline limestone aquifers : a phase-field study
Prajapati, N.; Selzer, M.; Nestler, B.
2017. Geothermal Energy, 5 (1), Art. Nr.: 15. doi:10.1186/s40517-017-0072-1

Phasenfeldsimulationen zur Mikrostrukturentwicklung während des Sinterprozesses
Hölzer, J.; Kellner, M.; Rehn, V.; Seiz, M.; Nestler, B.
2017. Forschung aktuell, 8–12

Numerical and experimental investigations on the growth of the intermetallic Mg₂Si phase in Mg infiltrated Si-foams
Wang, F.; Matz, A. M.; Tschukin, O.; Heimann, J.; Mocker, B. S.; Nestler, B.; Jost, N.
2017. Advanced engineering materials, 19 (10), Art.Nr. 1700063. doi:10.1002/adem.201700063

Influence of growth velocity variations on the pattern formation during the directional solidification of ternary eutectic Al-Ag-Cu
Hötzer, J.; Steinmetz, P.; Dennstedt, A.; Genau, A.; Kellner, M.; Sargin, I.; Nestler, B.
2017. Acta materialia, 136, 335–346. doi:10.1016/j.actamat.2017.07.007

Phase-field study on the effects of process and material parameters on the tilt angle during directional solidification of ternary eutectics
Dargahi Noubary, K.; Kellner, M.; Steinmetz, P.; Hötzer, J.; Nestler, B.
2017. Computational materials science, 138, 403–411. doi:10.1016/j.commatsci.2017.07.006

Simulation der martensitischen Transformation in polykristallinen Gefügen mit der Phasenfeldmethode
Schoof, E.; Streichhan, N.; Schneider, D.; Selzer, M.; Nestler, B.
2017. Forschung aktuell, 13–16

Magische Schäume
August, A.; Matz, A. M.; Mocker, B. S.; Heimann, J.; Nestler, B.; Jost, N.; Krug, P.
2017. Horizonte, 49, 3–5

Phase-Field Modelling of Welding and of Elasticity-Dependent Phase Transformations. PhD dissertation
Tschukin, O.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000072502

Dislocation-density based description of the deformation of a composite material
Schulz, K.; Sudmanns, M.; Gumbsch, P.
2017. Modelling and simulation in materials science and engineering, 25 (6), 064003. doi:10.1088/1361-651X/aa7a88

Interfacial free energy anisotropy driven faceting of precipitates
Roy, A.; Nani, E. S.; Lahiri, A.; Gururajan, M. P.
2017. The philosophical magazine, 1–31. doi:10.1080/14786435.2017.1348633

Massiv-parallele und großskalige Phasenfeldsimulationen zur Untersuchung der Mikrostrukturentwicklung. PhD dissertation
Hötzer, J.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000071870

Influence of grain boundary structure and topology on the plastic deformation of nanocrystalline aluminum as studied by atomistic simulations
Prakash, A.; Weygand, D.; Bitzek, E.
2017. International journal of plasticity, 97, 107–125. doi:10.1016/j.ijplas.2017.05.011

Data science approaches for microstructure quantification and feature identification in porous membranes
Altschuh, P.; Yabansu, Y. C.; Hötzer, J.; Selzer, M.; Nestler, B.; Kalidindi, S. R.
2017. Journal of membrane science, 540, 88–97. doi:10.1016/j.memsci.2017.06.020

Probabilistic Fracture Mechanics of Forged Rotor Disks. PhD dissertation
Amann, C.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000071647

Simulation der bei der gerichteten Erstarrung ternärer Eutektika entstehenden Mikrostruktur mit der Phasenfeldmethode. PhD dissertation
Steinmetz, P.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000071640

The atomic simulation environment - A Python library for working with atoms
Hjorth Larsen, A.; JØrgen Mortensen, J.; Blomqvist, J.; Castelli, I. E.; Christensen, R.; Dułak, M.; Friis, J.; Groves, M. N.; Hammer, B.; Hargus, C.; Hermes, E. D.; Jennings, P. C.; Bjerre Jensen, P.; Kermode, J.; Kitchin, J. R.; Leonhard Kolsbjerg, E.; Kubal, J.; Kaasbjerg, K.; Lysgaard, S.; Bergmann Maronsson, J.; Maxson, T.; Olsen, T.; Pastewka, L.; Peterson, A.; Rostgaard, C.; SchiØtz, J.; Schütt, O.; Strange, M.; Thygesen, K. S.; Vegge, T.; Vilhelmsen, L.; Walter, M.; Zeng, Z.; Jacobsen, K. W.
2017. Journal of physics / Condensed matter, 29 (27), Art. Nr.: 273002. doi:10.1088/1361-648X/aa680e

Effect of capillarity on the breakup of liquid jets, interfacial wave and motion of droplets in immiscible liquids. PhD dissertation
Wang, F.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000071294

Analysis of the running-in of thermal spray coatings by time-dependent stribeck maps
Linsler, D.; Kümmel, D.; Nold, E.; Dienwiebel, M.
2017. Wear, 376-377 (Part B), 1467–1474. doi:10.1016/j.wear.2017.02.026

Präparation weichmagnetischer Kompositwerkstoffe für strukturelle und mikromechanische Untersuchungen [Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations]
Schwark, T.; Müller, M.; Mine, Y.; Kreuter, T.; Kraft, O.; Schwaiger, R.
2017. Practical Metallography : Praktische Metallographie, 54 (6), 366–387. doi:10.3139/147.110424

Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis
Hemmesi, K.; Farajian, M.; Boin, M.
2017. Materials and design, 126, 339–350. doi:10.1016/j.matdes.2017.03.088

Damage inititation and evolution in silicon nitride under cyclic and rolling contact. PhD dissertation
Raga, R.
2017. Fraunhofer Verlag

Untersuchung tribologischer Systeme mit Y-TZP-Keramiken. PhD dissertation
Schröder, C.
2017. Fraunhofer Verlag

Massiv-parallele und großskalige Phasenfeldsimulationen zur Untersuchung der Mikrostrukturentwicklung. PhD dissertation
Hötzer, J.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000069984

The interface in molybdenum-copper-composites used for thermal management applications
Seiss, M.; Mrotzek, T.; Jäntsch, U.; Klimenkov, M.; Reiser, J.; Knabl, W.
2017. 33rd Annual Semiconductor Thermal Measurement and Management Symposium, SEMI-THERM 2017, Double Tree Hotel San Jose, United States, 13. - 17. März 2017, 246–251, IEEE Computer Society. doi:10.1109/SEMI-THERM.2017.7896937

Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings
Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.
2017. Surface and coatings technology, 321, 366–377. doi:10.1016/j.surfcoat.2017.04.050

Mikrowellenplasmagestützte Prozessentwicklung zur Herstellung von Funktionsgradientenhartmetallen für die CVD-Diamantbeschichtung. PhD dissertation
Mee, M.
2017. Shaker Verlag

On the stress calculation within phase-field approaches : a model for finite deformations
Schneider, D.; Schwab, F.; Schoof, E.; Reiter, A.; Herrmann, C.; Selzer, M.; Böhlke, T.; Nestler, B.
2017. Computational mechanics, 60 (2), 203–217. doi:10.1007/s00466-017-1401-8

Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen. PhD dissertation
Stricker, M.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000068883

Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen: Experimente, Modellbildung und Simulation. PhD dissertation
Maas, P.
2017. Fraunhofer Verlag

Characteristics of mechanical metamaterials based on buckling elements
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.
2017. Journal of the mechanics and physics of solids, 102, 151–164. doi:10.1016/j.jmps.2017.02.011

Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen. PhD dissertation
Stricker, M.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000067987

Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen. PhD dissertation
Polfer, P.
2017. Fraunhofer Verlag

Development of Bond-Order Potentials for BCC Transition Metals
Vitek, V.; Lin, Y. S.; Mrovec, M.
2017. 8th International Conference on Materials Structure and Micromechanics of Fracture, MSMF8, Brno, Czech Republic, 27. - 29. July 2016, 3–10, TTP. doi:10.4028/www.scientific.net/SSP.258.3

Main-Group Halide Semiconductors Derived from Perovskite: Distinguishing Chemical, Structural, and Electronic Aspects
Fabini, D. H.; Labram, J. G.; Lehner, A. J.; Bechtel, J. S.; Evans, H. A.; Van der Ven, A.; Wudl, F.; Chabinyc, M. L.; Seshadri, R.
2017. Inorganic chemistry, 56 (1), 11–25. doi:10.1021/acs.inorgchem.6b01539

Self-diffusion in intermetallic AlAu4: Molecular dynamics study down to temperatures relevant to wire bonding
Guerdane, M.
2017. Computational materials science, 129, 13–23. doi:10.1016/j.commatsci.2016.11.012

Integrated Research as Key to the Development of a Sustainable Geothermal Energy Technology
Meller, C.; Bremer, J.; Ankit, K.; Baur, S.; Bergfeldt, T.; Blum, P.; Canic, T.; Eiche, E.; Gaucher, E.; Hagenmeyer, V.; Heberling, F.; Held, S.; Herfurth, S.; Isele, J.; Kling, T.; Kuhn, D.; Mayer, D.; Müller, B.; Nestler, B.; Neumann, T.; Nitschke, F.; Nothstein, A.; Nusiaputra, Y.; Orywall, P.; Peters, M.; Sahara, D.; Schäfer, T.; Schill, E.; Schilling, F.; Schröder, E.; Selzer, M.; Stoll, M.; Wiemer, H.-J.; Wolf, S.; Zimmermann, M.; Kohl, T.
2017. Energy technology, 5 (7), 965–1006. doi:10.1002/ente.201600579

Phase-field simulations of multi-component solidification and coarsening based on thermodynamic datasets. PhD dissertation
Schulz, S.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000063920

Extraction of reduced-order process-structure linkages from phase-field simulations
Yabansu, Y. C.; Steinmetz, P.; Hötzer, J.; Kalidindi, S. R.; Nestler, B.
2017. Acta materialia, 124, 182–194. doi:10.1016/j.actamat.2016.10.071

Irreversibility of dislocation motion under cyclic loading due to strain gradients
Stricker, M.; Weygand, D.; Gumbsch, P.
2017. Scripta materialia, 129, 69–73. doi:10.1016/j.scriptamat.2016.10.029

Materials response to glancing incidence femtosecond laser ablation
Echlin, M. P.; Titus, M. S.; Straw, M.; Gumbsch, P.; Pollock, T. M.
2017. Acta materialia, 124, 37–46. doi:10.1016/j.actamat.2016.10.055

Phase-field simulations of curvature-induced cascading of Widmanstätten-ferrite plates
Bhattacharya, A.; Ankit, K.; Nestler, B.
2017. Acta materialia, 123, 317–328. doi:10.1016/j.actamat.2016.10.035

Experimental and numerical investigation of drop evaporation depending on the shape of the liquid/gas interface
Schweigler, K. M.; Ben Said, M.; Seifritz, S.; Selzer, M.; Nestler, B.
2017. International journal of heat and mass transfer, 105, 655–663. doi:10.1016/j.ijheatmasstransfer.2016.10.033

Surface rippling during solidification of binary polycrystalline alloy : Insights from 3-D phase-field simulations
Ankit, K.; Xing, H.; Selzer, M.; Nestler, B.; Glicksman, M. E.
2017. Journal of Crystal Growth, 457, 52–59. doi:10.1016/j.jcrysgro.2016.05.033

Validation of the applicability of a creep model for directionally solidified eutectics with a lamellar microstructure
Albiez, J.; Sprenger, I.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Proceedings in applied mathematics and mechanics, 16 (1), 297–298. doi:10.1002/pamm.201610137

Physically motivated model for creep of directionally solidified eutectics evaluated for the intermetallic NiAl-9Mo
Albiez, J.; Sprenger, I.; Seemüller, C.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Acta materialia, 110, 377–385. doi:10.1016/j.actamat.2016.02.024

Application of Large-Scale Phase-Field Simulations in the Context of High-Performance Computing
Hötzer, J.; Jainta, M.; Ben Said, M.; Steinmetz, P.; Berghoff, M.; Nestler, B.
2016. High Performance Computing in Science and Engineering ’15: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2015. Ed.: W. Nagel, 659–674, Springer International Publishing. doi:10.1007/978-3-319-24633-8_42

Generierung von dreidimensionalen Pulverstrukturen
Hölzer, J.; Serr, C.; Nestler, B.
2016. Forschung aktuell, 32–35

Evolution von Mikroporen in Kristallen mit hexagonaler Gitteranisotropie
Schneider, D.; Langerome, B.; Selzer, M.; Reiter, A.; Nestler, B.
2016. Forschung aktuell, 36–38

Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic monte carlo, molecular dynamics, and phase-field simulations
Molnar, D.; Mukherjee, R.; Choudhury, A.; Mora, A.; Binkele, P.; Selzer, M.; Nestler, B.; Schmauder, S.
2016. Multiscale Materials Modeling : Approaches to Full Multiscaling. Ed.: S. Schmauder, 15–36, De Gruyter. doi:10.1515/9783110412451-004

Miniaturisierung? Ja, bitte!
Piotter, V.; Eberl, C.; Kraft, O.
2016. Forschung, 41 (3), 24–27. doi:10.1002/fors.201690036

Geothermal heat in a heat pump use
Pavlova, A.; Hansen, J.; Obermeyer, H.; Pavlova, I.
2016. IOP conference series / Earth and environmental science, 43, Art.Nr. 012025. doi:10.1088/1755-1315/43/1/012025

Zum Einfluss struktureller Eigenschaften auf das tribologische und rheologische Verhalten geschmierter Reibkontakte am Beispiel von ionischen Flüssigkeiten. PhD dissertation
Dold, C.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000067368

Corrigendum to “In situ TEM study of twin boundary migration in sub-micron Be fibers” [Acta Mater. 96 (2015) 57–65]
Mompiou, F.; Legros, M.; Ensslen, C.; Kraft, O.
2016. Acta materialia, 109, 406–407. doi:10.1016/j.actamat.2016.02.055

Phasenfeldmodellierung mechanisch getriebener Grenzflächenbewegungen in mehrphasigen Systemen. PhD dissertation
Schneider, D.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000066948

A mesoscale approach for dislocation density motion using a Runge-Kutta discontinuous Galerkin method
Schulz, K.; Wagner, L.; Wieners, C.
2016. Proceedings in applied mathematics and mechanics, 16 (1), 403–404. doi:10.1002/pamm.201610190

Study of complex microstructure evolution in ternary eutectic alloys with massive parallel large-scale phasefield simulations
Hötzer, J.; Jainta, M.; Bauer, M.; Steinmetz, P.; Kellner, M.; Köstler, H.; Rüde, U.; Nestler, B.
2016. High performance computing in science and engineering, Garching/Munich 2016. Ed.: S. Wagner, 194–195, Bayerische Akademie der Wissenschaften

Tribological Performance of Aligned Silicon Nitride Ceramics under Isooctane-Lubricated Oscillating Sliding Conditions
Schneider, J.; Miranzo, P.; Isabel Osendi, M.; Belmonte, M.
2016. Journal of the American Ceramic Society, 99 (1), 241–248. doi:10.1111/jace.13805

Simulation von Laserschweißprozessen zur Bewertung der wasserstoffbeeinflussten Kaltrissneigung hochfester Stähle. PhD dissertation
Schweizer, F.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000063625

Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen. PhD dissertation
Metzger, M.
2016. Fraunhofer Verlag

Detachment of nanowires driven by capillarity
Wang, F.; Nestler, B.
2016. Scripta materialia, 113, 167–170. doi:10.1016/j.scriptamat.2015.11.002

Analytics for microstructure datasets produced by phase-field simulations
Steinmetz, P.; Yabansu, Y. C.; Hötzer, J.; Jainta, M.; Nestler, B.; Kalidindi, S. R.
2016. Acta materialia, 103, 192–203. doi:10.1016/j.actamat.2015.09.047

Calibration of a multi-phase field model with quantitative angle measurement
Hötzer, J.; Tschukin, O.; Ben Said, M.; Berghoff, M.; Jainta, M.; Barthelemy, G.; Smorchkov, N.; Schneider, D.; Selzer, M.; Nestler, B.
2016. Journal of materials science, 51 (4), 1788–1797. doi:10.1007/s10853-015-9542-7

Microstructures in a ternary eutectic alloy : devising metrics based on neighbourhood relationships
Dennstedt, A.; Choudhury, A.; Ratke, L.; Nestler, B.
2016. IOP conference series / Materials science and engineering, 117, Art.Nr. 012025. doi:10.1088/1757-899X/117/1/012025

Large-scale phase-field simulations of ternary eutectic microstructure evolution
Steinmetz, P.; Hötzer, J.; Kellner, M.; Dennstedt, A.; Nestler, B.
2016. Computational materials science, 117, 205–214. doi:10.1016/j.commatsci.2016.02.001

Phase-field simulations of spiral growth during directional ternary eutectic solidification
Hötzer, J.; Steinmetz, P.; Jainta, M.; Schulz, S.; Kellner, M.; Nestler, B.; Genau, A.; Dennstedt, A.; Bauer, M.; Köstler, H.; Rüde, U.
2016. Acta materialia, 106, 249–259. doi:10.1016/j.actamat.2015.12.052

A general approximation of the exponential Cauchy-Born hypothesis to model arbitrarily shaped shell-like nanostructures within continuum mechanics
Findeisen, C.; Wackerfuß, J.
2016. International journal for numerical methods in engineering, 105 (10), 747–780. doi:10.1002/nme.4992

Influence of substrate interaction and confinement on electric-field-induced transition in symmetric block-copolymer thin films
Mukherjee, A.; Mukherjee, R.; Ankit, K.; Bhattacharya, A.; Nestler, B.
2016. Physical review / E, 93 (3), Art.Nr.: 032504. doi:10.1103/PhysRevE.93.032504

Mesoskopischer Ansatz zur Festigkeitsberechnung von Bremsscheiben. PhD dissertation
Schmid, S.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000062541

The role of dislocation pile-up in flow stress determination and strain hardening
Zhu, Y.; Xiang, Y.; Schulz, K.
2016. Scripta materialia, 116, 53–56. doi:10.1016/j.scriptamat.2016.01.025

Importance of inclusion of the effect of s electrons into bond-order potentials for transition bcc metals with d-band mediated bonding
Lin, Y.-S.; Mrovec, M.; Vitek, V.
2016. Modelling and simulation in materials science and engineering, 24 (8), Art. Nr.: 085001. doi:10.1088/0965-0393/24/8/085001

The evolving quality of frictional contact with graphene
Li, S.; Li, Q.; Carpick, R. W.; Gumbsch, P.; Liu, X. Z.; Ding, X.; Sun, J.; Li, J.
2016. Nature <London> (0028-0836, 1476-4687), 539 (7630), 541–545. doi:10.1038/nature20135

Hydrogenated vacancies lock dislocations in aluminium
Xie, D.; Li, S.; Li, M.; Wang, Z.; Gumbsch, P.; Sun, J.; Ma, E.; Li, J.; Shan, Z.
2016. Nature Communications, 7, 13341. doi:10.1038/ncomms13341

Modellierung des Verformungs- und Versagensverhaltens punktgeschweißter Mischverbindungen zwischen mikrolegierten und pressgehärteten Stählen. PhD dissertation
Burget, S.
2016. Fraunhofer Verlag

Heat propagation in computer designed and real metal foam structures
August, A.; Matz, A. M.; Nestler, B.; Jost, N.
2016. Multidiscipline modeling in materials and structures, 12 (4). doi:10.1108/MMMS-03-2016-0012

Applications of the phase-field method for the solidification of microstructures in multi-component systems
Hötzer, J.; Kellner, M.; Steinmetz, P.; Nestler, B.
2016. Journal of the Indian Institute of Science, 96 (3), 235–256

Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation. PhD dissertation
Baiker, M.
2016. Fraunhofer Verlag

Electric-field-induced lamellar to hexagonally perforated lamellar transition in diblock copolymer thin films: Kinetic pathways
Mukherjee, A.; Ankit, K.; Reiter, A.; Selzer, M.; Nestler, B.
2016. Physical chemistry, chemical physics, 18 (36), 25609–25620. doi:10.1039/c6cp04903f

Ultrasound influence on behavior of disordered dislocation systems in a crystal with non-equilibrium grain boundaries
Bachurin, D. V.; Murzaev, R. T.; Baimova, J. A.; Samigullina, A. A.; Krylova, K. A.
2016. Letters on Materials, 6 (3), 183–188. doi:10.22226/2410-3535-2016-3-183-188

Combining in situ and online approaches to monitor interfacial processes in lubricated sliding contacts
Stoyanov, P.; Shockley, J. M.; Dienwiebel, M.; Chromik, R. R.
2016. MRS communications, 6 (3), 301–308. doi:10.1557/mrc.2016.35

Sequence of Stages in the Microstructure Evolution in Copper under Mild Reciprocating Tribological Loading
Greiner, C.; Liu, Z.; Strassberger, L.; Gumbsch, P.
2016. ACS applied materials & interfaces, 8 (24), 15809–15819. doi:10.1021/acsami.6b04035

Molecular Dynamic Simulation of Collision-Induced Third-Body Formation in Hydrogen-Free Diamond-Like Carbon Asperities
Lautz, J. von; Pastewka, L.; Gumbsch, P.; Moseler, M.
2016. Tribology letters, 63 (2), 1–9. doi:10.1007/s11249-016-0712-9

A reciprocating optical in situ tribometer with high-speed data acquisition
Becker, S.; Popp, U.; Greiner, C.
2016. Review of scientific instruments, 87 (8), 085101. doi:10.1063/1.4959883

Phase-Field Modeling of Grain-Boundary Grooving Under Electromigration
Mukherjee, A.; Ankit, K.; Mukherjee, R.; Nestler, B.
2016. Journal of electronic materials, 45 (12), 6233–6246. doi:10.1007/s11664-016-4848-z

First principles characterisation of brittle transgranular fracture of titanium hydrides
Olsson, P. A. T.; Mrovec, M.; Kroon, M.
2016. Acta materialia, 118, 362–373. doi:10.1016/j.actamat.2016.07.037

Offset-corrected Δ -Kohn-Sham scheme for semiempirical prediction of absolute x-ray photoelectron energies in molecules and solids
Walter, M.; Moseler, M.; Pastewka, L.
2016. Physical review / B, 94 (4), Art.Nr.:041112. doi:10.1103/PhysRevB.94.041112

Flexoelectricity and the polarity of complex ferroelastic twin patterns
Salje, E. K. H.; Li, S.; Stengel, M.; Gumbsch, P.; Ding, X.
2016. Physical review / B, 94 (2), 024114. doi:10.1103/PhysRevB.94.024114

Haften wie ein Gecko
Greiner, C.; Hölscher, H.
2016. Physik in unserer Zeit, 47 (3), 116–122. doi:10.1002/piuz.201601422

3D Synchrotron Imaging of a Directionally Solidified Ternary Eutectic
Dennstedt, A.; Helfen, L.; Steinmetz, P.; Nestler, B.; Ratke, L.
2016. Metallurgical and materials transactions / A, 47 (3), 981–984. doi:10.1007/s11661-015-3294-5

Comparison of analytical methods for the consideration of thermal stresses in the engineering failure assessment
Dittmann, F.; Varfolomeev, I.
2016. 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, 2974–2981, Curran. doi:10.1016/j.prostr.2016.06.372

Structural lubricity under ambient conditions
Cihan, E.; Ipek, S.; Durgun, E.; Baykara, M. Z.
2016. Nature Communications, 7, Art.Nr.: 12055. doi:10.1038/ncomms12055

First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe
Di Stefano, D.; Nazarov, R.; Hickel, T.; Neugebauer, J.; Mrovec, M.; Elsässer, C.
2016. Physical Review B - Condensed Matter and Materials Physics, 93 (18), 184108/1–14. doi:10.1103/PhysRevB.93.184108

Ultrahigh Tensile Strength Nanowires with a Ni/Ni-Au Multilayer Nanocrystalline Structure
An, B.; Jeon, I.; Seo, J.; Ahn, J.; Kraft, O.; Choi, I.; Kim, Y.
2016. Nano letters, 16 (6), 3500–3506. doi:10.1021/acs.nanolett.6b00275

Phase-field modeling of crack propagation in multiphase Systems
Schneider, D.; Schoof, E.; Huang, Y.; Selzer, M.; Nestler, B.
2016. Computer methods in applied mechanics and engineering, 312, 186–195. doi:10.1016/j.cma.2016.04.009

Modeling of crack propagation on a mesoscopic length scale
Nestler, B.; Schneider, D. M.; Schoof, E.; Huang, Y.; Selzer, M.
2016. GAMM-Mitteilungen, 39 (1), 78–91. doi:10.1002/gamm.201610005

Numerical and experimental description of the welding residual stress field in tubular joints for fatigue assessment
Hemmesi, K.; Farajian, M.; Siegele, D.
2016. Welding in the World, 60 (4), 741–748. doi:10.1007/s40194-016-0328-6

Chronology of the microstructure evolution for pearlitic steel under unidirectional tribological loading
Wolff, K.; Liu, Z.; Braun, D.; Schneider, J.; Greiner, C.
2016. Tribology international, 102, 540–545. doi:10.1016/j.triboint.2016.06.016

Bond-order potential for magnetic body-centered-cubic iron and its transferability
Lin, Y.; Mrověc, M.; Vitek, V.
2016. Physical Review B, 93 (21), 214107. doi:10.1103/PhysRevB.93.214107

Phase-field simulations of multi-component solidification and coarsening based on thermodynamic datasets. PhD dissertation
Schulz, S.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000056199

Einlaufverhalten einer untereutektischen AlSi-Legierung unter Berücksichtigung des Randzonengefüges. PhD dissertation
Linsler, D.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000056144

Liquid Glass: A Facile Soft Replication Method for Structuring Glass
Kotz, F.; Plewa, K.; Bauer, W.; Schneider, N.; Keller, N.; Nargang, T.; Helmer, D.; Sachsenheimer, K.; Schäfer, M.; Worgull, M.; Greiner, C.; Richter, C.; Rapp, B.
2016. Advanced materials, 28 (23), 4646–4650. doi:10.1002/adma.201506089

The creep behavior of long fiber reinforced thermoplastics examined by microstructural simulations
Fliegener, S.; Hohe, J.; Gumbsch, P.
2016. Composites science and technology, 131, 1–11. doi:10.1016/j.compscitech.2016.05.006

A multiscale approach for thermomechanical simulations of loading courses in cast iron brake discs
Schmid, S.; Schneider, D. M.; Herrmann, C.; Selzer, M.; Nestler, B.
2016. International Journal for Multiscale Computational Engineering, 14 (1), 25–43. doi:10.1615/IntJMultCompEng.2015014764

Contact area of rough spheres : Large scale simulations and simple scaling laws
Pastewka, L.; Robbins, M. O.
2016. Applied physics letters, 108 (22), Art. Nr. 221601. doi:10.1063/1.4950802

In Situ Formation of Nanohybrid Shish-Kebabs during Electrospinning for the Creation of Hierarchical Shish-Kebab Structures
Arras, M. M. L.; Jana, R.; Mühlstädt, M.; Maenz, S.; Andrews, J.; Su, Z.; Grasl, C.; Jandt, K. D.
2016. Macromolecules, 49 (9), 3550–3558. doi:10.1021/acs.macromol.6b00153

Phase-field study of the pattern formation in Al-Ag-Cu under the influence of the melt concentration
Steinmetz, P.; Kellner, M.; Hötzer, J.; Dennstedt, A.; Nestler, B.
2016. Computational Materials Science, 121, 6–13. doi:10.1016/j.commatsci.2016.04.025

Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers
Frenzel, T.; Findeisen, C.; Kadic, M.; Gumbsch, P.; Wegener, M.
2016. Advanced materials, 28 (28), 5865–5870. doi:10.1002/adma.201600610

Formation of extended prismatic dislocation structures under indentation
Gagel, J.; Weygand, D.; Gumbsch, P.
2016. Acta Materialia, 111 (1), 399–406. doi:10.1016/j.actamat.2016.04.002

Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts
Savio, D.; Pastewka, L.; Gumbsch, P.
2016. Science Advances, 2 (3), e1501585. doi:10.1126/sciadv.1501585

Activation and mechanochemical breaking of C−C bonds initiate wear of diamond (110) surfaces in contact with silica
Peguiron, A.; Moras, G.; Walter, M.; Uetsuka, H.; Pastewka, L.; Moseler, M.
2016. Carbon, 98, 474–483. doi:10.1016/j.carbon.2015.10.098

Elasticity limits structural superlubricity in large contacts
Sharp, T. A.; Pastewka, L.; Robbins, M. O.
2016. Physical Review B - Condensed Matter and Materials Physics, 93 (12), Article Nr. 121402. doi:10.1103/PhysRevB.93.121402

Reibung unter Zugzwang
Pastewka, L.
2016. Physik-Journal, 15 (3), 16–17

Fertigungstechnische und tribologische Wirkmechanismen beim Polymerläppen am Beispiel der Werkstoffpaarung einer Nockenwellenlagerung. PhD dissertation
Weyhmüller, T.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000053542

Phase-field study of pore-grain boundary interaction
Hötzer, J.; Rehn, V.; Rheinheimer, W.; Hoffmann, M. J.; Nestler, B.
2016. Journal of the Ceramic Society of Japan, 124 (4), 329–339. doi:10.2109/jcersj2.15266

Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten. PhD dissertation
Rasp, T.
2016. Fraunhofer Verlag

Phase-field modeling of microstructural pattern formation in alloys and geological veins. PhD dissertation
Ankit, K.
2016. KIT Scientific Publishing. doi:10.5445/KSP/1000052440

A phase-field study on the formation of the intermetallic AlAu phase in the Al-Au system
Wang, F.; Nestler, B.
2015. Acta materialia, 95 (2), 65–73. doi:10.1016/j.actamat.2015.05.002

Considering the Influence of Minimum Quantity Lubrication for Modelling Changes in Temperature, Forces and Phase Transformations during Machining
Bollig, P.; Faltin, C.; Schießl, R.; Schneider, J.; Maas, U.; Schulze, V.
2015. Procedia CIRP, 31, 142–147. doi:10.1016/j.procir.2015.03.025

Considering User’s Impact in Validation Activities - An Approach for the Determination of Requirements
Pinner, T.; Jost, F.; Schmid, D.; Albers, A.
2015. Design for life : the 20th International Conference on Engineering Design (ICED 15) ; 27th - 30th July 2015, Politecnico di Milano, Italy. Bd.: Pt. 1, 5–51, The Design Society

Discussion of the Evolution of Micro Cracks by Characterization and Modelling of Metal Matrix Composites Reinforced by Metallic Glass Particles
Schulz, K.; Lichtenberg, K.; Weidenmann, K. A.
2015. Proceedings to the 20th International Conference on Composite Materials, 19-24 July 2015, Copenhagen, Denmark, 1–12, http://www.iccm-central.org/

Die Elite der Maschinenbauer. Professorin Britta Nestler forscht am KIT
Nestler, B.
2015. Stadtgespräche aus Karlsruhe. Hrsg.: M. Kehle, 119–124, Gmeiner

Charakterisierung mehrkomponentiger Materialstrukturen durch den Einsatz von Höchstleistungsrechnern und Data Mining Konzepte
Steinmetz, P.; Hötzer, J.; Nestler, B.
2015. Ingenieur-Spiegel, (3)

Die Vielfalt der Musterbildung in Metallen - Großskalige Phasenfeldsimulationen zur gerichteten Erstarrung ternärer eutektischer Systeme
Hötzer, J.; Jainta, M.; Steinmetz, P.; Dennstedt, A.; Nestler, B.
2015. Horizonte, 45, 10–13

Elasto-plastic phase-field model accounting for mechanical jump conditions during solid-state phase transformations
Schneider, D.; Tschukin, O.; Choudhury, A.; Selzer, M.; Nestler, B.
2015. Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM), Whistler, Canada, 28th June - 3rd July 2015. Ed.: M. Militzer, 899–900, PTM

Large scale phase-field simulations of directional ternary eutectic solidification
Hötzer, J.; Jainta, M.; Steinmetz, P.; Nestler, B.; Dennstedt, A.; Genau, A.; Bauer, M.; Köstler, H.; Rüde, U.
2015. Acta materialia, 93, 194–204. doi:10.1016/j.actamat.2015.03.051

Underdamped capillary wave caused by solutal Marangoni convection in immiscible liquids
Wang, F.; Ben Said, M.; Selzer, M.; Nestler, B.
2015. Journal of materials science, 51 (4), 1820–1828. doi:10.1007/s10853-015-9600-1

Compound Droplets on Fibers
Weyer, F.; Ben Said, M.; Hötzer, J.; Berghoff, M.; Dreesen, L.; Nestler, B.; Vandewalle, N.
2015. Langmuir, 31 (28), 7799–7805. doi:10.1021/acs.langmuir.5b01391

Phase-Field Model for Mixed-Mode of Growth Applied to Austenite to Ferrite Transformation
Bhattacharya, A.; Upadhyay, C. S.; Sangal, S.
2015. Metallurgical and materials transactions / A, 46 (2), 926–936. doi:10.1007/s11661-014-2665-7

Diffuse interface method for fluid flow and heat transfer in cellular solids
Ettrich, J.; Nestler, B.
2015. Advances in engineering software, 87, 1–12. doi:10.1016/j.advengsoft.2015.04.012

Reduced tight-binding models for elemental Si and N, and ordered binary Si-N systems
Gehrmann, J.; Pettifor, D. G.; Kolmogorov, A. N.; Reese, M.; Mrovec, M.; Elsaesser, C.; Drautz, R.
2015. Physical review / B, 91 (5), Art. Nr.: 054109. doi:10.1103/PhysRevB.91.054109

Small-Scale Multiaxial Setup for Damage Detection Into the Very High Cycle Fatigue Regime
Straub, T.; Berwind, M. F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.
2015. Experimental mechanics, 55 (7), 1285–1299. doi:10.1007/s11340-015-0027-z

First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel
Di Stefano, D.; Mrovec, M.; Elsässer, C.
2015. Acta materialia, 98, 306–312. doi:10.1016/j.actamat.2015.07.031

A method for coupling the phase-field model based on a grand-potential formalism to thermodynamic databases
Choudhury, A.; Kellner, M.; Nestler, B.
2015. Current opinion in solid state & materials science, 19 (5), 287–300. doi:10.1016/j.cossms.2015.03.003

Complex Nanotwin Substructure of an Asymmetric Sigma 9 Tilt Grain Boundary in a Silicon Polycrystal
Stoffers, A.; Ziebarth, B.; Barthel, J.; Cojocaru-Mirédin, O.; Elsässer, C.; Raabe, D.
2015. Physical review letters, 115 (23), Art.Nr.:235502. doi:10.1103/PhysRevLett.115.235502

Theoretical and experimental study of the core structure and mobility of dislocations and their influence on the ferroelectric polarization in perovskite KNbO3
Hirel, P.; Mark, A. F.; Castillo-Rodriguez, M.; Sigle, W.; Mrovec, M.; Elsässer, C.
2015. Physical review / B, 92 (21), Art.Nr.:214101. doi:10.1103/PhysRevB.92.214101

Equivalent plastic strain gradient plasticity with grain boundary hardening and comparison to discrete dislocation dynamics
Bayerschen, E.; Stricker, M.; Wulfinghoff, S.; Weygand, D.; Böhlke, T.
2015. Proceedings of the Royal Society of London / A, 471 (2184), Art.Nr.:20150388. doi:10.1098/rspa.2015.0388

Influence of subsurface plastic deformation on the running-in behavior of a hypoeutectic AlSi alloy
Linsler, D.; Schröckert, F.; Scherge, M.
2015. Tribology International, 100, 224–230. doi:10.1016/j.triboint.2016.01.033

Massively parallel phase-field simulations for ternary eutectic directional solidification
Bauer, M.; Hötzer, J.; Jainta, M.; Steinmetz, P.; Berghoff, M.; Schornbaum, F.; Godenschwager, C.; Köstler, H.; Nestler, B.; Rüde, U.
2015. International Conference for High Performance Computing, Networking, Storage and Analysis, SC 2015; Austin; United States; 15 November 2015 through 20 November 2015, Art.Nr.: 8, Association for Computing Machinery (ACM). doi:10.1145/2807591.2807662

Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient
Greiner, C.; Merz, T.; Braun, D.; Codrignani, A.; Magagnato, F.
2015. Surface topography, 3 (4). doi:10.1088/2051-672X/3/4/044001

Internal stresses in a homogenized representation of dislocation microstructures
Schmitt, S.; Gumbsch, P.; Schulz, K.
2015. Journal of the Mechanics and Physics of Solids, 84, 528–544. doi:10.1016/j.jmps.2015.08.012

Dislocation multiplication mechanisms – Glissile junctions and their role on the plastic deformation at the microscale
Stricker, M.; Weygand, D.
2015. Acta Materialia, 99, 130–139. doi:10.1016/j.actamat.2015.07.073

Stress and strain fluctuations in plastic deformation of crystals with disordered microstructure
Kapetanou, O.; Weygand, D.; Zaiser, M.
2015. Journal of Statistical Mechanics: Theory and Experiment, (8), P08009. doi:10.1088/1742-5468/2015/08/P08009

Lithium Ion Conduction in LiTi₂(PO₄)₃ and Related Compounds Based on the NASICON Structure: A First-Principles Study
Lang, B.; Ziebarth, B.; Elsässer, C.
2015. Chemistry of Materials, 27 (14), 5040–5048. doi:10.1021/acs.chemmater.5b01582

Microscale study of frictional properties of graphene in ultra high vacuum
Marchetto, D.; Feser, T.; Dienwiebel, M.
2015. Friction, 3 (2), 161–169. doi:10.1007/s40544-015-0080-8

The structure of tribolayers at the commutator and brush interface: A case study of failed and non-failed DC motors
Fakih, B.; Dienwiebel, M.
2015. Tribology International, 92, 21–28. doi:10.1016/j.triboint.2015.05.008

Interstitial iron impurities at cores of dissociated dislocations in silicon
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B, 92, 195308. doi:10.1103/PhysRevB.92.195308

The interaction of dislocations and hydrogen-vacancy complexes and its importance for deformation-induced proto nano-voids formation in α-Fe
Li, S.; Li, Y.; Lo, Y.-C.; Neeraj, T.; Srinivasan, R.; Ding, X.; Sun, J.; Qi, L.; Gumbsch, P.; Li, J.
2015. International Journal of Plasticity, 74, 175–191. doi:10.1016/j.ijplas.2015.05.017

Influence of dislocation strain fields on the diffusion of interstitial iron impurities in silicon
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B, 92, 115309. doi:10.1103/PhysRevB.92.115309

Dislocation injection in strontium titanate by femtosecond laser pulses
Titus, M. S.; Echlin, M. P.; Gumbsch, P.; Pollock, T. M.
2015. Journal of Applied Physics, 118 (7), 075901. doi:10.1063/1.4928772

Multiscale Simulation of Plasticity in bcc Metals
Weygand, D.; Mrovec, M.; Hochrainer, T.; Gumbsch, P.
2015. Annual Review of Materials Research, 45 (1), 369–390. doi:10.1146/annurev-matsci-070214-020852

Polar twin boundaries and nonconventional ferroelectric switching
Salje, E. K. H.; Li, S.; Zhao, Z.; Gumbsch, P.; Ding, X.
2015. Applied Physics Letters, 106 (21), 212907. doi:10.1063/1.4922036

Verbesserung lokaler Spaltbruchmodelle unter Berücksichtigung mikromechanischer Vorgänge. PhD dissertation
Hardenacke, V.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000051105

Micromechanical finite element modeling of long fiber reinforced thermoplastics. PhD dissertation
Fliegener, S.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000051015

PECVD Prozessüberwachung - Wiederholbare Nutzung technischer Plasmen. PhD dissertation
Grotjahn, T.
2015. Fraunhofer Verlag

Einfluss der tribochemischen Schmierstoffoxidation auf die wasserstoffinduzierte Wälzkontaktermüdung. PhD dissertation
Kürten, D. R.
2015. Fraunhofer Verlag. doi:10.5445/IR/1000050971

Phase field crystal modeling of ternary solidification microstructures
Berghoff, M.; Nestler, B.
2015. Computational condensed matter, 4, 46–58. doi:10.1016/j.cocom.2015.08.002

Experimental and Numerical Investigation on the Phase Separation Affected by Cooling Rates and Marangoni Convection in Cu-Cr Alloys
Wang, F.; Klinski-Wetzel, K. von; Mukherjee, R.; Nestler, B.; Heilmaier, M.
2015. Metallurgical and materials transactions / A, 46 (4), 1756–1766. doi:10.1007/s11661-015-2745-3

On the motion of droplets driven by solutal Marangoni convection in alloy systems with a miscibility gap
Wang, F.; Selzer, M.; Nestler, B.
2015. Physica D: Nonlinear Phenomena, 307, 82–96. doi:10.1016/j.physd.2015.06.001

Low Speed Crack Propagation via Kink Formation and Advance on the Silicon (110) Cleavage Plane
Kermode, J. R.; Gleizer, A.; Kovel, G.; Pastewka, L.; Csányi, G.; Sherman, D.; De Vita, A.
2015. Physical Review Letters, 115 (3), Art.Nr. 135501. doi:10.1103/PhysRevLett.115.135501

Microstructural evolution in bitaxial crack-seal veins: A phase-field study
Ankit, K.; Urai, J. L.; Nestler, B.
2015. Journal of geophysical research / Solid earth, 120 (5), 3096–3118. doi:10.1002/2015JB011934

Phase‐field Modeling of Fracture Cementation Processes in 3‐D
Ankit, K.; Selzer, M.; Hilgers, C.; Nestler, B.
2015. Journal of Petroleum Science Research, 4 (2), 79–96. doi:10.12783/jpsr.2015.0402.04

Deviations from cooperative growth mode during eutectoid transformation: Mechanisms of polycrystalline eutectoid evolution in Fe-C steels
Ankit, K.; Mukherjee, R.; Nestler, B.
2015. Acta Materialia, 97, 316–324. doi:10.1016/j.actamat.2015.06.050

Evolution of mixed cementite morphologies during non-cooperative eutectoid transformation in Fe-C steels
Ankit, K.; Mittnacht, T.; Mukherjee, R.; Nestler, B.
2015. Computational materials science, 108, 342–347. doi:10.1016/j.commatsci.2015.03.002

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets
Lenthe, W. C.; Echlin, M. P.; Trenkle, A.; Syha, M.; Gumbsch, P.; Pollock, T. M.
2015. Journal of Applied Crystallography, 48 (4), 1034–1046. doi:10.1107/S1600576715009231

Dynamische Lastverteilung auf einem HPC Framework mit nachrichtenbasierter Kommunikation
Heisler, C.; Hötzer, J.; Maier, M.; Reiter, A.; Selzer, M.; Nestler, B.
2015. Forschung aktuell, 2015, 16–18

Modellierung und Simulation der Starrkörperbewegung in Rückschlagventilen
Jainta, M.; Reiter, A.; August, A.; Moik, F.; Nestler, B.
2015. Forschung aktuell, 2015, 13–15

Sonnenbäder am Nordpol: Das Eisbär-Prinzip für Gebäude
August, A.; Nestler, B.; Kneer, A.
2015. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (45), 68

Small strain elasto-plastic multiphase-field model
Schneider, D.; Schmid, S.; Selzer, M.; Boehlke, T.; Nestler, B.
2015. Computational Mechanics, 55 (1), 27–35. doi:10.1007/s00466-014-1080-7

Phase-field elasticity model based on mechanical jump conditions
Schneider, D.; Tschukin, O.; Choudhury, A.; Selzer, M.; Böhlke, T.; Nestler, B.
2015. Computational mechanics, 55 (5), 887–901. doi:10.1007/s00466-015-1141-6

Zur Tribologie von strukturierten Skibelägen auf Eis und Schnee. PhD dissertation
Böttcher, R.
2015. Karlsruher Institut für Technologie (KIT)

Entwicklung und Anwendung von Methoden zur Simulation des Trocknens von Suspensionen. PhD dissertation
Breinlinger, T.
2015. Fraunhofer Verlag

Größeneffekte bei strukturierten tribologischen Wirkflächen. PhD dissertation
Braun, D.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000048548

Skalenübergreifende Modellierung und Optimierung vom atomistischen kristallinen Phasenfeldmodell bis zur mesoskopischen Phasenfeldmethode. PhD dissertation
Berghoff, M.
2015. KIT Scientific Publishing. doi:10.5445/KSP/1000048186

Interstitial iron impurities at grain boundaries in silicon: A first-principles study
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B - Condensed Matter and Materials Physics, 91 (3). doi:10.1103/PhysRevB.91.035309

Atomistic aspects of fracture
Bitzek, E.; Kermode, J. R.; Gumbsch, P.
2015. International Journal of Fracture. doi:10.1007/s10704-015-9988-2

Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating
De Barros Bouchet, M. I.; Matta, C.; Vacher, B.; Le-Mogne, T.; Martin, J. M.; Von Lautz, J.; Ma, T.; Pastewka, L.; Otschik, J.; Gumbsch, P.; Moseler, M.
2015. Carbon, 87 (C), 317–329. doi:10.1016/j.carbon.2015.02.041

Atomistically enabled nonsingular anisotropic elastic representation of near-core dislocation stress fields in a-iron
Seif, D.; Po, G.; Mrovec, M.; Lazar, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B - Condensed Matter and Materials Physics, 91 (18), 184102. doi:10.1103/PhysRevB.91.184102

On slip transmission and grain boundary yielding
Stricker, M.; Gagel, J.; Schmitt, S.; Schulz, K.; Weygand, D.; Gumbsch, P.
2015. Meccanica, 51 (2), 271–278. doi:10.1007/s11012-015-0192-2

Prediction of heat conduction in open-cell foams via the diffuse interface representation of the phase-field method
August, A.; Ettrich, J.; Rölle, M.; Schmid, S.; Berghoff, M.; Selzer, M.; Nestler, B.
2015. International Journal of Heat and Mass Transfer, 84, 800–808. doi:10.1016/j.ijheatmasstransfer.2015.01.052

Phase-field simulations of large-scale microstructures by integrated parallel algorithms
Hötzer, J.; Jainta, M.; Vondrous, A.; Ettrich, J.; August, A.; Stubenvoll, D.; Reichardt, M.; Selzer, M.; Nestler, B.
2015. High Performance Computing in Science and Engineering ’14 : Transactions of the High Performance Computing Center, Stuttgart (HLRS), 2014. Hrsg.: W. E. Nagel, 629–644, Springer. doi:10.1007/978-3-319-10810-0_41

Combined crystal plasticity and phase-field method for recrystallization in a process chain of sheet metal production
Vondrous, A.; Bienger, P.; Schreijäg, S.; Selzer, M.; Schneider, D.; Nestler, B.; Helm, D.; Mönig, R.
2015. Computational mechanics, 55 (2), 439–452. doi:10.1007/s00466-014-1115-0

Einlaufverhalten von geschmierten Stahl-Stahl-Paarungen unter Berücksichtigung der Mikrostruktur. PhD dissertation
Brink, A.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000046413

Surface Softening in Metal - Ceramic Sliding Contacts: An Experimental and Numerical Investigation
Stoyanov, P.; Merz, R.; Romero, P.; Wählisch, F. C.; Abad, O. T.; Gralla, R.; Stemmer, P.; Kopnarski, M.; Moseler, M.; Bennewitz, R.; Dienwiebel, M.
2015. ACS nano, 9 (2), 1478–1491. doi:10.1021/nn505968m

Micro- and Nanotribology of Graphene
Dienwiebel, M.; Bennewitz, R.
2015. Fundamentals of Friction and Wear on the Nanoscale, 453–460, Springer-Verlag. doi:10.1007/978-3-319-10560-4_20

Untersuchung des Verschleißverhaltens von keramischen Schneidstoffen im trockenen Gleitreibungskontakt mit Nickelbasislegierungen. PhD dissertation
Renz, A.
2015. Fraunhofer Verlag

Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032

Experimental Analysis of microstructured steel surfaces for wet tribological applications in the low velocity regime
Chlipala, M.; Schneider, J.; Schulze, V.
2014. Conference papers in science, Article ID 387830. doi:10.1155/2015/387830

Internal length scale and grain boundary yield strength in gradient models of polycrystal plasticity: How do they relate to the dislocation microstructure?
Zhang, X.; Aifantis, K. E.; Senger, J.; Weygand, D.; Zaiser, M.
2014. Journal of materials research, 29 (18), 2116–2128. doi:10.1557/jmr.2014.234

Entwicklung eines Latentwärmespeichers für hohe Temperaturen
Oezcan, T.; Koffler, M.; Kauffeld, M.
2014. Forschung aktuell, 8

Ice crystal growth and particle size distribution in ice slurry systems (review)
Koffler, M.; Schaaf, J.; Kauffeld, M.
2014. 11th IIR Gustav Lorentzen Conference on Natural Refrigerants (GL2014). Proceedings. Hangzhou, China, August 31-September 2, 2014

Messverfahren für Adhäsionskräfte von Eiskristallen
Schaaf, J.; Kauffeld, M.
2014. Annual meeting of the Deutscher Kälte- und Klimatechnischer Verein 2013, Deutsche Kälte-Klima-Tagung 2013 Hannover : Hannover, Germany, 20 - 22 November 2013, Deutscher Kälte- und Klimatechnischer Verein e.V. (DKV)

Orientation dependence oft the fracture behavior of single-christal tungsten
Bohnert, C.; Weygand, S. M.; Schmitt, N. J.; Ruth, S.; Kraft, O.
2014. 20th European Conference on Fracture „Fracture at all scales": from the 30th of June to the 4th of July, 2014, Trondheim, Norway

Mechanics and Dislocation Structures at the Micro-Scale: Insights on Dislocation Multiplication Mechanisms from Discrete Dislocation Dynamics Simulations
Weygand, D.
2014. MRS online proceedings library, 1651, mrsf13–1651-kk07. doi:10.1557/opl.2014.362

Packungsalgorithmen zur Generierung granularer Partikelstrukturen für die Simulation von Sinterprozessen
Hötzer, J.; Rölle, M.; Nestler, B.
2014. Forschung aktuell, 2014, 57–60

Molecular Dynamics virtual testing of thermally aged Fe–Cu microstructures obtained from multiscale simulations
Molnar, D.; Binkele, P.; Mora, A.; Mukherjee, R.; Nestler, B.; Schmauder, S.
2014. Computational materials science, 81, 466–470. doi:10.1016/j.commatsci.2013.08.057

Growth rate distributions for regular two-dimensional grains with Read–Shockley grain boundary energy
Vondrous, A.; Reichardt, M.; Nestler, B.
2014. Modelling and simulation in materials science and engineering, 22 (2), 025014. doi:10.1088/0965-0393/22/2/025014

Reliability characterization of a soot particle sensor: Analysis of stress- and electromigration in thin-film platinum
Rusanov, R.; Graf, J.; Rank, H.; Fuchs, T.; Mueller-Fiedler, R.; Kraft, O.
2014. 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2014); Cannes, France, April 1 - 4, 2014, Art.Nr.: 7056639, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DTIP.2014.7056639

Taming the Untamable - The Art and Science of Diamond Polishing
Moseler, M.; Pastewka, L.; Hird, J.
2014. Comprehensive hard materials / ed.in chief: V.K. Sarin. Vol. 3: Super hard materials. Ed.: Ch. E. Nebel, 81–98, Elsevier. doi:10.1016/B978-0-08-096527-7.00042-8

Contact between rough surfaces and a criterion for macroscopic adhesion
Pastewka, L.; Robbins, M. O.
2014. Proceedings of the National Academy of Sciences of the United States of America, 111 (9), 3298–3303. doi:10.1073/pnas.1320846111

Wear, Plasticity, and Rehybridization in Tetrahedral Amorphous Carbon
Kunze, T.; Posselt, M.; Gemming, S.; Seifert, G.; Konicek, A. R.; Carpick, R. W.; Pastewka, L.; Moseler, M.
2014. Tribology Letters, 53 (1), 119–126. doi:10.1007/s11249-013-0250-7

Atomistic simulation of the deformation of nanocrystalline palladium: the effect of voids
Bachurin, D.; Gumbsch, P.
2014. Modelling and Simulation in Materials Science and Engineering, 22 (2), 025011. doi:10.1088/0965-0393/22/2/025011

Non-Destructive Evaluation of 3D Microstructure Evolution during Sintering of Strontium Titanate
Gumbsch, P.; Syha, M.; Lödermann, B.; Trenkle, A.; Graff, A.
2014. International Journal of Advanced Microscopy and Theoretical Calculations. Special issue: Proceedings of the 4th International Symposium on Advanced Microscopy and Theoretical Calculations (AMTC4). Ed.: T. Hirayama, 80–81, Japan Fine Ceramics Center

Contact Splitting and the Effect of Dimple Depth on Static Friction of Textured Surfaces
Greiner, C.; Schäfer, M.; Popp, U.; Gumbsch, P.
2014. ACS Applied Materials & Interfaces, 6 (11), 7986–7990. doi:10.1021/am500879m

Praxisnahe Versagensbeschreibung bei der Umformung von Feinblechen
Merklein, M.; Gröbel, D. G.; Gumbsch, P.; Butz, A.; Helm, D.
2014. EFB-Verlag

3D microstructure modeling of long fiber reinforced thermoplastics
Fliegener, S.; Luke, M.; Gumbsch, P.
2014. Composites Science and Technology, 104, 136–145. doi:10.1016/j.compscitech.2014.09.009

Phase-field modeling of diffusion coupled crack propagation processes
Schneider, D.; Selzer, M.; Bette, J.; Rementeria, I.; Vondrous, A.; Hoffmann, M. J.; Nestler, B.
2014. Advanced Engineering Materials, 16 (2), 142–146. doi:10.1002/adem.201300073

Atomic scale mechanisms of friction reduction and wear protection by graphene
Klemenz, A.; Pastewka, L.; Balakrishna, S. G.; Caron, A.; Bennewitz, R.; Moseler, M.
2014. Nano Letters, 14 (12), 7145–7152. doi:10.1021/nl5037403

Surface passivation and boundary lubrication of self-mated tetrahedral amorphous carbon asperities under extreme tribological conditions
Romero, P. A.; Pastewka, L.; Lautz, J. von; Moseler, M.
2014. Friction, 2 (2), 193–208. doi:10.1007/s40544-014-0057-z

Deviations from cooperative growth mode during eutectoid transformation: Insights from a phase-field approach
Ankit, K.; Mukherjee, R.; Mittnacht, T.; Nestler, B.
2014. Acta Materialia, 81, 204–210. doi:10.1016/j.actamat.2014.08.015

Virtuelle Material- und Prozessentwicklung am Beispiel der Konstrukturausbildung in Schweißnähten
Nestler, B.; Tschukin, O.; Jainta, M.; Daubermann, M.; Selzer, M.; Widak, V.; Hoffmann, J.; Rieth, M.
2014. Forschungsreport für den Maschinenbau in Baden-Württemberg, 2014, 56–58

Three-dimensional phase-field study of crack-seal microstructures - insights from innovative post-processing techniques
Ankit, K.; Selzer, M.; Nestler, B.
2014. Geoscientific model development discussions, 7, 631–658. doi:10.5194/gmdd-7-631-2014

Metallische Schneeflocken
Wesner, E.; August, A.; Nestler, B.
2014. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (43), 29–31

Modelling of transient heat conduction with diffuse interface methods
Ettrich, J.; Choudhury, A.; Tschukin, O.; Schoof, E.; August, A.; Nestler, B.
2014. Modelling and simulation in materials science and engineering, 22 (8), Art.Nr. 085006/1–29. doi:10.1088/0965-0393/22/8/085006

Mechanische und Strömungsmechanische Topologieoptimierung mit der Phasenfeldmethode. PhD dissertation
Selzer, M.
2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000049243

Carbon nanotubes/silicon nitride nanocomposites for gasoline lubricated high pressure pumps
Pfister, C.; Schneider, J.; Miranzo, P.; Osendi, M. I.; Belmonte, M.
2014. Composites / B, 64, 168–174. doi:10.1016/j.compositesb.2014.04.017

Robust and wear resistant in-situ carbon nanotube/Si3N 4 nanocomposites with a high loading of nanotubes
Gonzalez-Julian, J.; Datye, A.; Wu, K.-H.; Schneider, J.; Belmonte, M.
2014. Carbon, 72, 338–347. doi:10.1016/j.carbon.2014.02.014

Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
Braun, D.; Greiner, C.; Schneider, J.; Gumbsch, P.
2014. Tribology International, 77, 142–147. doi:10.1016/j.triboint.2014.04.012

Origin of anomalous slip in tungsten
Marichal, C.; Srivastava, K.; Weygand, D.; Van Petegem, S.; Grolimund, D.; Gumbsch, P.; Van Swygenhoven, H.
2014. Physical Review Letters, 113 (2), 025501. doi:10.1103/PhysRevLett.113.025501

Dislocation junctions as indicators of elementary slip planes in body-centered cubic metals
Srivastava, K.; Weygand, D.; Gumbsch, P.
2014. Journal of Materials Science, 49 (20), 7333–7337. doi:10.1007/s10853-014-8447-1

Lithium diffusion in the spinel phase Li4Ti5O12 and in the rocksalt phase Li7Ti5O12 of lithium titanate from first principles
Ziebarth, B.; Klinsmann, M.; Eckl, T.; Elsässer, C.
2014. Physical Review B, 89 (17), 174301. doi:10.1103/PhysRevB.89.174301

Potential-induced degradation in solar cells: Electronic structure and diffusion mechanism of sodium in stacking faults of silicon
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2014. Journal of applied physics, 116 (9), 093510. doi:10.1063/1.4894007

Dipole formation and yielding in a two-dimensional continuum dislocation model
Dickel, D.; Schulz, K.; Schmitt, S.; Gumbsch, P.
2014. Physical Review B, 90 (9, Art.094118), 1–8. doi:10.1103/PhysRevB.90.094118

Origins of Folding Instabilities on Polycrystalline Metal Surfaces
Beckmann, N.; Romero, P. A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P.
2014. Applied physics reviews, 2 (6), Art.Nr.: 064004. doi:10.1103/PhysRevApplied.2.064004

Numerical study on solutal Marangoni instability in finite systems with a miscibility gap
Wang, F.; Mukherjee, R.; Selzer, M.; Nestler, B.
2014. Physics of fluids, 26 (12), Art.Nr. 1.4902355. doi:10.1063/1.4902355

Electron microscopic evidence for a tribologically induced phase transformation as the origin of wear in diamond
Zhang, X.; Schneider, R.; Müller, E.; Mee, M.; Meier, S.; Gumbsch, P.; Gerthsen, D.
2014. Journal of Applied Physics, 115 (6), 063508. doi:10.1063/1.4865742

Pentamode metamaterials with independently tailored bulk modulus and mass density
Kadic, M.; Bückmann, T.; Schittny, R.; Gumbsch, P.; Wegener, M.
2014. Physical Review Applied, 2 (5), 054007/1–7. doi:10.1103/PhysRevApplied.2.054007

TEM and STEM/EELS Studies of Diamond-Like Carbon (DLC) Films and Diamond Films. PhD dissertation
Zhang, X.
2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000044927

In situ tensile testing of nanoscale Cu/Nb multiliayers
Lohmiller, J.; Polyakov, M. N.; Hodge, A. M.; Doyle, S.; Gruber, P. A.
2014. ANKA User Reports 2012/2013, 90–91, Karlsruher Institut für Technologie (KIT)

Grain growth behavior and efficient large scale simulations of recrystallization with the phase-field method. PhD dissertation
Vondrous, A.
2014. KIT Scientific Publishing. doi:10.5445/KSP/1000043520

KIT Data Manager: The Repository Architecture Enabling Cross-Disciplinary Research
Jejkal, T.; Vondrous, A.; Kopmann, A.; Stotzka, R.; Hartmann, V.
2014. Large-Scale Data Management and Analysis (LSDMA) - Big Data in Science. Hrsg.: Ch. Jung, 9–11, Karlsruher Institut für Technologie (KIT)

Numerische Untersuchung des Wärmeübertragungsverhaltens in unterschiedlichen porösen Medien. PhD dissertation
Kneer, A.
2014. KIT Scientific Publishing. doi:10.5445/KSP/1000042451

Atomistically-informed discrete dislocation dynamics modeling of plastic flow in body-centered cubic metals. PhD dissertation
Srivastava, K.
2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000042367

Microstructure evolution in strontium titanate Investigated by means of grain growth simulations and x-ray diffraction contrast tomography experiments. PhD dissertation
Syha, M.
2014. KIT Scientific Publishing. doi:10.5445/KSP/1000042175

Fluid Flow and Heat Transfer in Cellular Solids. PhD dissertation
Ettrich, J.
2014. KIT Scientific Publishing. doi:10.5445/KSP/1000042041

A Continuum Formulation of Stress Correlations of Dislocations in Two Dimensions
Dickel, D.; Schulz, K.; Schmitt, S.; Gumbsch, P.
2014. Technische Mechanik, 34 (3-4), 205–212

Untersuchungen zum Einlaufverhalten binärer alpha-Messinglegierungen unter Ölschmierung in Abhängigkeit des Zinkgehaltes. PhD dissertation
Feser, T.
2014. KIT Scientific Publishing. doi:10.5445/KSP/1000041146

Reducing the computational effort of optimal process controllers for continuous state spaces by using incremental learning and post-decision state formulations
Senn, M.; Link, N.; Pollak, J.; Lee, J. H.
2014. Journal of Process Control, 24 (3), 133–143. doi:10.1016/j.jprocont.2014.01.002

Analysis of dislocation pile-ups using a dislocation-based continuum theory
Schulz, K.; Dickel, D.; Schmitt, S.; Sandfeld, S.; Weygand, D.; Gumbsch, P.
2014. Modelling and Simulation in Materials Science and Engineering, 22 (2), 025008. doi:10.1088/0965-0393/22/2/025008

Scale-bridging phase-field simulations of microstructure responses on nucleation in metals and colloids
Berghoff, M.; Nestler, B.
2014. European physical journal special topics, 223 (3), 409–419. doi:10.1140/epjst/e2014-02099-8

A Phase-Field Approach for Wetting Phenomena of Multiphase Droplets on Solid Surfaces
Ben Said, M.; Selzer, M.; Nestler, B.; Braun, D.; Greiner, C.; Garcke, H.
2014. Langmuir, 30 (14), 4033–4039. doi:10.1021/la500312q

Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten
Stoyanov, P.; Romero, P. A.; Merz, R.; Kopnarski, M.; Stricker, M.; Stemmer, P.; Dienwiebel, M.; Moseler, M.
2014. Acta Materialia, 67, 395–408. doi:10.1016/j.actamat.2013.12.029

Free energy of melts and intermetallic compounds of binary alloys determined by a molecular dynamics approach
Guerdane, M.
2014. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 89 (2), 023308. doi:10.1103/PhysRevE.89.023308

Continuum dislocation dynamics: Towards a physical theory of crystal plasticity
Hochrainer, T.; Sandfeld, S.; Zaiser, M.; Gumbsch, P.
2014. Journal of the Mechanics and Physics of Solids, 63 (1), 167–178. doi:10.1016/j.jmps.2013.09.012

Parallel computing for phase-field models
Vondrous, A.; Selzer, M.; Hötzer, J.; Nestler, B.
2014. The international journal of high performance computing applications, 28 (1), 61–72. doi:10.1177/1094342013490972