Publications 2024

Novel, high throughput interface fracture testing method for thermal spray coatings: The modified cantilever bend technique
Mishra, A. K.; Abbas, S.; Srinivasan, D.; Sampath, S.; Jaya, B. N.
2024. Journal of the European Ceramic Society, 44 (12), 7285–7295. doi:10.1016/j.jeurceramsoc.2024.04.074

Data set: Evaluating neon ions as an alternative to gallium in micro cantilevers fracture testing
Okotete, E.; Mück, S.; Lee, S.; Kirchlechner, C.
2024, December 13. doi:10.5281/zenodo.14436867

Harvesting room-temperature plasticity in ceramics by mechanically seeded dislocations
Fang, X.; Lu, W.; Zhang, J.; Minnert, C.; Hou, J.; Bruns, S.; Kunz, U.; Nakamura, A.; Durst, K.; Rödel, J.
2024. Materials Today. doi:10.1016/j.mattod.2024.11.014

Dealing with Missing Angular Sections in NanoCT Reconstructions of Low Contrast Polymeric Samples Employing a Mechanical In Situ Loading Stage
Debastiani, R.; Kurpiers, C. M.; Lemma, E. D.; Breitung, B.; Bastmeyer, M.; Schwaiger, R.; Gumbsch, P.
2024. Microscopy Research and Technique. doi:10.1002/jemt.24746

Short-term tensile creep behavior of CoCrNi-based multi-principal element alloys
Lu, K.; Aktaa, J.
2024. Intermetallics, 175, 108500. doi:10.1016/j.intermet.2024.108500

Creep-fatigue assessment of EUROFER taking into account the impact of cyclic softening on its creep behavior
Aktaa, J.; Walter, M.; Angella, G.
2024, July 29. 16th International Conference on Creep and Fracture of Engineering Materials and Structures (2024), Bengaluru, India, July 28–August 2, 2024

Entwicklung eines Metall-Keramik-Verbundes für thermo-mechanisch hochbelastbare Sichtfenster. PhD dissertation
Spatafora, L.
2024, November 18. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000176190

Uncovering ionic transport paths within hierarchically structured battery electrodes
Johanna Naumann; Müller, M.; Bohn, N.; Binder, J. R.; Kamlah, M.; Gan, Y.
2024, October 30. doi:10.5281/zenodo.14013402

Dislocation‐induced local symmetry reduction in single‐crystal KNbO₃ observed by Raman spectroscopy
Drechsler, F.; Himcinschi, C.; Preuß, O.; Fang, X.; Kortus, J.
2024. Journal of the American Ceramic Society, Art.-Nr. e20221. doi:10.1111/jace.20221

Partikelbasierte Methoden für die Berechnung von effektiven Transporteigenschaften und Mechanik in granularen Mehrphasen-Elektroden. PhD dissertation
Wahn, A.
2024, November 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175740

Solvent Vapor Annealing and Plasma Treatment Stabilize Silver Nanowire Layers
Grammes, T.; Maurer, J.; González-García, L.; Kraus, T.
2024. Particle & Particle Systems Characterization, Art.-Nr.: 2400091. doi:10.1002/ppsc.202400091

Ultrahigh‐Pressure Structural Modification in BiCuSeO Ceramics: Dense Dislocations and Exceptional Thermoelectric Performance
Yin, Z.; Zhang, H.; Wang, Y.; Wu, Y.; Xing, Y.; Wang, X.; Fang, X.; Yu, Y.; Guo, X.
2024. Advanced Energy Materials. doi:10.1002/aenm.202403174

Solid solution strengthening in single-phase Mo alloys. PhD dissertation
Winkens, G.
2024, October 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175389

Pyramidal dislocation driven martensitic nucleation: A step toward consilience of deformation scenario in fcc materials (II)
Lee, T.-H.; Ha, H.-Y.; Kim, S. H.; Park, H.; Park, S.-J.; Lee, C.-H.; Lee, S.; Kirchlechner, C.
2024. Acta Materialia, 281, Art.-Nr.: 120385. doi:10.1016/j.actamat.2024.120385

Synergistic effects of Pt and Y addition in (Ni, Pt)CrAlY bond coat on oxide spallation resistance and growth of interdiffusion zone between bond coat and Ni-based single crystal superalloy
Bansal, U.; Esakkiraja, N.; Baskaran, T.; Paul, T.; Ravi, R.; Kumar, P.; Jayaram, V.; Paul, A.
2024. Corrosion Science, 240, Art.-Nr.: 112485. doi:10.1016/j.corsci.2024.112485

Strangler root diagnosis with punching test
Mattheck, C.; Bethge, K.
2024. Poster im Internet

Punching atlas - Detailed examination of the local fiber orientation with punching iron
Mattheck, C.; Bethge, K.
2024. Poster im Internet

Mechanisms of Structure Evolution During Metal Deposition in Lithium- and Sodium-Metal Batteries. PhD dissertation
Becherer, J.
2024, October 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000174631

Measuring the twinning stress at the micron scale: A comprehensive comparison of testing geometries
Teixeira, C. A.; Lee, S.; Kirchlechner, C.
2024. Materials Characterization, 217, 114314. doi:10.1016/j.matchar.2024.114314

Drastic softening of Pd nanoparticles induced by hydrogen cycling
Zimmerman, J.; Vrellou, M.; Wagner, S.; Pundt, A.; Kirchlechner, C.; Rabkin, E.
2024. Scripta Materialia, 253, Art.-Nr. 116304. doi:10.1016/j.scriptamat.2024.116304

Intermitted 3D Diffraction Tomography Combined with In situ Laue Diffraction to Characterize Dislocation Structures and Stress Fields in Microbending Cantilevers
Molin, J.-B.; Renversade, L.; Micha, J.-S.; Ulrich, O.; Robach, O.; Gruber, P. A.; Kirchlechner, C.
2024. Advanced Engineering Materials, 26 (19), Art.-Nr. 2400357. doi:10.1002/adem.202400357

Enhancing the photoelectric performance of metal oxide semiconductors by introduction of dislocations
Zhang, H.; Gao, S.; Wang, H.; Zhuo, F.; Muhammad, Q. K.; Fang, X.; Rödel, J.; Frömling, T.; Li, Q.
2024. Journal of Materials Chemistry A, 12 (35), 23910–23919. doi:10.1039/D4TA03786C

Simulation study of energy transfer chain of DEMOnstration Balance of Plant on behalf of operation stability. PhD dissertation
Bologa, M.-V.
2024, August 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000173316

Stanzatlas - Eingehende Untersuchung des lokalen Faserverlaufes mit Locheisen
Mattheck, C.; Bethge, K.
2024. Poster im Internet

Würgewurzeldiagnose mit Stanztest
Mattheck, C.; Bethge, K.
2024. Poster im Internet

Room‐temperature bulk plasticity and tunable dislocation densities in KTaO
Fang, X.; Zhang, J.; Frisch, A.; Preuß, O.; Okafor, C.; Setvin, M.; Lu, W.
2024. doi:10.48550/arXiv.2406.00623

Macroscopic modeling of flexoelectricity-driven remanent polarization in piezoceramics
Sutter, F.; Kamlah, M.
2024. European Journal of Mechanics - A/Solids, 105410. doi:10.1016/j.euromechsol.2024.105410

Room‐temperature bulk plasticity and tunable dislocation densities in KTaO
Fang, X.; Zhang, J.; Frisch, A.; Preuß, O.; Okafor, C.; Setvin, M.; Lu, W.
2024. Journal of the American Ceramic Society, 107 (11), 7054–7061. doi:10.1111/jace.20040

Novel Class of Crystal/Glass Ultrafine Nanolaminates with Large and Tunable Mechanical Properties
Bignoli, F.; Djemia, P.; Terraneo, G.; Abadias, G.; Gammer, C.; Lassnig, A.; Teixeira, C. A.; Lee, S.; Ahmadian, A.; Li Bassi, A.; Faurie, D.; Ghidelli, M.
2024. ACS Applied Materials & Interfaces, 16 (27), 35686–35696. doi:10.1021/acsami.4c02610

In Rissen lesen
Mattheck, C.; Bethge, K.
2024. Konstruktionspraxis, 2024 (9), 24–25

Effect of low blockage ratio obstacle on explosion characteristic in methane/air mixture
Li, S.; Gao, K.; Xia, H.; Yang, Y.; Wang, X.
2024. Arabian Journal of Chemistry, 17 (9), Art.-Nr.: 105890. doi:10.1016/j.arabjc.2024.105890

From Powder to Pouch Cell: Setting up a Sodium‐Ion Battery Reference System Based on Na3V2(PO4)3/C and Hard Carbon
Stüble, P.; Müller, C.; Bohn, N.; Müller, M.; Hofmann, A.; Akçay, T.; Klemens, J.; Koeppe, A.; Kolli, S.; Rajagopal, D.; Geßwein, H.; Schabel, W.; Scharfer, P.; Selzer, M.; Binder, J. R.; Smith, A.
2024. Batteries & Supercaps, 7 (12), e202400406. doi:10.1002/batt.202400406

Experimental and Theoretical Developments on Accurately Measuring and Modeling Grain Boundary Diffusion in Solids. PhD dissertation
Short, M.
2024, July 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172084

Design of the WCLL BB in View of the Conceptual Design Phase
Arena, P.; Del Nevo, A.; Aktaa, J.; Bongiovi, G.; Bühler, L.; Catanzaro, I.; Cesaroni, S.; Chelihi, B.; Ciurluini, C.; Collaku, A.; Garnier, C.; Giannetti, F.; Haghdoust, P.; Imbriani, V.; Lucca, F.; Maccari, P.; Maqueda, L.; Melchiorri, L.; Mistrangelo, C.; Moro, F.; Moulignier, T.; Mozzillo, R.; Noce, S.; Pagani, I.; Pontier, J. B.; Pomella Lobo, T.; Ruiz, P.; Savoldi, L.; Siriano, S.; Tassone, A.; Urgorri, F. R.; Viganò, F.; Yanez, A.
2024. 33rd Symposium on Fusion Technology (SOFT 2024), Dublin, Ireland, September 22–27, 2024

Near‐surface plastic deformation in polycrystalline SrTiO via room‐temperature cyclic Brinell indentation
Okafor, C.; Ding, K.; Preuß, O.; Khansur, N.; Rheinheimer, W.; Fang, X.
2024. Journal of the American Ceramic Society, 107 (10), 6715–6728. doi:10.1111/jace.19962

Effect of temperature on mechanical properties of beryllium intermetallic compounds fabricated by plasma sintering
Hwang, T.; Kim, J.-H.; Sugimoto, Y.; Gaisin, R.; Rolli, R.; Vladimirov, P.; Akatsu, Y.; Yokohama, S.; Nakano, S.; Nakamichi, M.
2024. Nuclear Materials and Energy, 40, Art.-Nr.: 101686. doi:10.1016/j.nme.2024.101686

Stable crack growth geometries as a strategy to circumvent FIB artefacts in small scale fracture testing. PhD dissertation
Okotete, E.
2024, June 26. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000171738

Uncovering Ionic Transport Paths within Hierarchically Structured Battery Electrodes
Naumann, J.; Müller, M.; Bohn, N.; Binder, J. R.; Kamlah, M.; Gan, Y.
2024. ACS Applied Energy Materials, 7 (11), 4786–4793. doi:10.1021/acsaem.4c00505

Multiscale computational study to predict the irradiation-induced change in engineering properties of fusion reactor materials
Mohamed, S.; Po, G.; Lewis, R.; Nithiarasu, P.
2024. Nuclear Materials and Energy, 39, Art.-Nr.: 101647. doi:10.1016/j.nme.2024.101647

Laserstrukturierung von Silizium-Graphit-Anoden für Lithium-Ionen-Batterien der nächsten Generation. PhD dissertation
Zheng, Y.
2024, June 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000170881

Ein Phasenfeldmodell zur Simulation des Einflusses von Leitungsmechanismen in einem ferroelektrischen Nanogenerator. PhD dissertation
Wöhler, F. J.
2024, April 11. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000169828

HICU PIE results of neutron-irradiated lithium metatitanate pebbles
Leys, J.; Rolli, R.; Schneider, H.-C.; Knitter, R.
2024. Nuclear Materials and Energy, 38, 101625. doi:10.1016/j.nme.2024.101625

Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M.
2024. Advanced Engineering Materials, 26 (17), 2301797. doi:10.1002/adem.202301797

Influence of transmutation-induced Re/Os content on defect evolution in neutron-irradiated W
Klimenkov, M.; Jäntsch, U.; Rieth, M.; Schneider, H. C.; Terentyev, D.; Renterghem, W. Van
2024. Journal of Nuclear Materials, 592, Art.-Nr.: 154950. doi:10.1016/j.jnucmat.2024.154950

Analysis of an interface crack with multiple electric boundary conditions on its faces in a one-dimensional hexagonal quasicrystal bimaterial
Govorukha, V.; Kamlah, M.
2024. Archive of Applied Mechanics, 94, 589–607. doi:10.1007/s00419-024-02538-0

Field-dependent Abundances of Hydride Molecular Ions in Atom Probe Tomography of III-N Semiconductors
Diagne, A.; Garcia, L. G.; Ndiaye, S.; Gogneau, N.; Vrellou, M.; Houard, J.; Rigutti, L.
2024. Journal of Microscopy, 293 (3), 153–159. doi:10.1111/jmi.13233

Observation of the local electromechanical response in 2–2 ceramic–ceramic lead-free ferroelectric composites via digital image correlation
Martin, A.; Maier, J. G.; Kakimoto, K.- ichi; Kamlah, M.; Webber, K. G.
2024. Journal of Applied Physics, 135 (4), Art.-Nr. 044102. doi:10.1063/5.0184763

Multiscale Investigation of Sodium‐Ion Battery Anodes: Analytical Techniques and Applications
Schäfer, D.; Hankins, K.; Allion, M.; Krewer, U.; Karcher, F.; Derr, L.; Schuster, R.; Maibach, J.; Mück, S.; Kramer, D.; Mönig, R.; Jeschull, F.; Daboss, S.; Philipp, T.; Neusser, G.; Romer, J.; Palanisamy, K.; Kranz, C.; Buchner, F.; Behm, R. J.; Ahmadian, A.; Kübel, C.; Mohammad, I.; Samoson, A.; Witter, R.; Smarsly, B.; Rohnke, M.
2024. Advanced Energy Materials, 14 (15), Art.-Nr.: 2302830. doi:10.1002/aenm.202302830

Impact of particle size distribution on the rest phase behavior of LIB cathodes – Model based analysis
Fath, M.; Heidebrecht, P.; Drechsler, C.; Kamlah, M.
2024. Journal of Power Sources, 596, 234100. doi:10.1016/j.jpowsour.2024.234100

Modeling storage particle delamination and electrolyte cracking in cathodes of solid state batteries
Zhang, T.; Kamlah, M.; McMeeking, R. M.
2024. Journal of the Mechanics and Physics of Solids, 185, 105551. doi:10.1016/j.jmps.2024.105551

Die Falte: Materialspeicher oder selbstoptimierter Zugstrang?
Mattheck, C.; Bethge, K.; Weber, K.
2024. Konstruktionspraxis, 2024 (02), 10 – 11

Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system
Pereira, J. N.; Ott, V.; Afonso, C. R. M.; de Sousa Malafaia, A. M.; Stüber, M.; Greiner, C.; Pinto, H. C.
2024. Surface and Coatings Technology, 477, Art.-Nr.: 130369. doi:10.1016/j.surfcoat.2023.130369

Friction anisotropy and associated surface deformation mechanisms in heterogeneous copper/bronze laminates
Zhang, Q.; Li, Y.; Liang, F.; Zhou, Z.; Li, Y.; Rau, J.; Greiner, C.; Zhao, Y.; Zhu, Y.; Chen, X.
2024. Materials Characterization, 208, 113644. doi:10.1016/j.matchar.2024.113644

Ab-initio simulations of the intrinsic Deformation Mechanisms in Body Centered Cubic Al-Cr-Mo-Nb-Ti and Hf-Nb-Ta-Ti-Zr alloys. PhD dissertation
Deck, K. W.
2024, January 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167382

Understanding the damage initiation and growth mechanisms of two DP800 dual phase grades
Tian, C.; Kusche, C. F.; Medina, A.; Lee, S.; Wollenweber, M. A.; Pippan, R.; Korte-Kerzel, S.; Kirchlechner, C.
2024. Materials & Design, 238, Art.-Nr. 112630. doi:10.1016/j.matdes.2024.112630

Computational modelling of gas–liquid–solid multiphase free surface flow with and without evaporation
Xia, H.; Kamlah, M.
2024. Particuology, 90, 218–235. doi:10.1016/j.partic.2023.12.004

Materiell nichtlineare Kontinuumsmodellierung ferroelektrischer Funktionskeramiken mit piezoelektrischen und flexoelektrischen Eigenschaften. PhD dissertation
Sutter, F.
2024. KIT Scientific Publishing. doi:10.5445/KSP/1000167121

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature
Ren, Y.; Zhou, Q.; Hua, D.; Huang, Z.; Li, Y.; Jia, Q.; Gumbsch, P.; Greiner, C.; Wang, H.; Liu, W.
2024. Science Bulletin, 69 (2), 227–236. doi:10.1016/j.scib.2023.12.003

Untersuchung der Mikrostruktureinflüsse auf die mechanischen Eigenschaften von Nano- und Mikroarchitekturen. PhD dissertation
Kurpiers, C. M.
2024, January 10. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000166935

An improved Coupled Level Set and Volume of Fluid (i-CLSVoF) framework for sessile droplet evaporation
Kamlah, M.; Xia, H.
2024. Journal of Computational Science, 75, Art.Nr.: 102195. doi:10.1016/j.jocs.2023.102195

Enhanced strength-ductility synergy of a partially recrystallized AlCrFeNi multi-principal element alloy
Lu, K.; Shi, H.; Weisenburger, A.; Aktaa, J.
2024. Materials Characterization, 207, Art.-Nr.: 113578. doi:10.1016/j.matchar.2023.113578

Creep in 0.91(Na₁/₂ Bi₁/₂ )TiO₃-0.06BaTiO₃-0.0₃K₀.₅Na₀.₅ NbO₃ lead-free piezoceramic under constant electric field loads
Chen, D.; Ayrikyan, A.; Chu, X.; Kamlah, M.; Webber, K. G.
2024. Journal of Physics D: Applied Physics, 57 (6), 065301. doi:10.1088/1361-6463/ad090e

Raw Data to "Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys"
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M.
2024, February 29. doi:10.35097/1784

Mechanical properties and quality of plasma sprayed, functionally graded tungsten/steel coatings after process upscaling
Grammes, T.; Mishra, A. K.; Battalov, K.; Purwitasari, A.; Emmerich, T.; Aktaa, J.
2024. Materials Chemistry and Physics, 311, Art.-Nr.: 128530. doi:10.1016/j.matchemphys.2023.128530

Mechanical tailoring of dislocations in ceramics at room temperature: A perspective
Fang, X.
2024. Journal of the American Ceramic Society, 107 (3), 1425–1447. doi:10.1111/jace.19362

In Situ Pyrolysis of 3D Printed Building Blocks for Functional Nanoscale Metamaterials
Sun, Q.; Dolle, C.; Kurpiers, C.; Kraft, K.; Islam, M.; Schwaiger, R.; Gumbsch, P.; Eggeler, Y. M. M.
2024. Advanced Functional Materials, 34 (20), Art.-Nr.: 2302358. doi:10.1002/adfm.202302358