Forschung

Dr. Pantcho Stoyanov

Post-Doc
Raum: J.-von-Fraunhofer-Str.7, 76327 Pfinztal
Tel.: +49 721 4640-748
pantcho stoyanov ∂does-not-exist.kit edu

Veröffentlichungen
Titel	Autor	Quelle
Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten	P. Stoyanov, P. A. Romero, R. Merz, M. Kopnarski, M. Stricker, P. Stemmer, M. Dienwiebel, M. Moseler	Acta Materialia, 67 (2014), 395-408
Friction and wear mechanisms of tungsten-carbon systems: A comparison of dry and lubricated conditions	P. Stoyanov, P. Stemmer, T. Järvi, R. Merz, P. Romero, M. Scherge, M. Kopnarski, M. Moseler, A. Fischer, M. Dienwiebel	ACS Applied Materials & Interfaces, Band 5, 6123-6135 (2013)
The running-in mechanisms of binary brass studied by in-situ topography measurements	T. Feser, P. Stoyanov, F. Mohr, M. Dienwiebel	Wear, 303 (2013), 465-472
Experimental and numerical atomistic investigation of the third body formation process in dry tungsten/tungsten-carbide tribo couples	P. Stoyanov, P. Romero, M. Scherge, M. Moseler, M. Dienwiebel, A. Fischer	Tribology Letters (2012)
Scaling effects between micro- and macro-tribology for a Ti/MoS2 coating	P. Stoyanov, H. W. Strauss, R. R. Chromik	Wear, Band 274-275, Seiten 149-161 (2012)
Microtribological performance of Au/MoS2 nanocomposite and Au/MoS2 bilayer coatings	P. Stoyanov, S. Gupta, R. R. Chromik, J. R. Lince	Tribology International, Band 52, Seiten 144-152 (2012)
Influence of humidity on the tribological performance of unmodified soybean and sunflower oils	M. T. Siniawski, N. Saniei, P. Stoyanov	Lubrication Science, Band 23, Seiten 301-311 (2011)
The effects of heat damage of aluminum 6061-T6 AM-2 Mats and High Power Run-Up Anchor	M. Prietto, M. Tsang, S. Hernandez, J. Roepke, D. Piatkowski, E. Lee, P. Stoyanov, J. Ogren, O.S. Es-Said	Engineering Failure Analysis, Band 18, Seiten 124-137 (2011)
Analysis of Heat Effects on Marine Corps AM2 Mat Mechanical Properties	V. Vega, U. Nguyen Huynh, J. Holmes, J. DeChellis, P. Stoyanov, D. Piatkowski, E. W. Lee, J. Ogren, N. Drusina, O. S. Es-Said	Journal of Materials Engineering and Performance, Band 20, Seiten 257-264 (2011)
Micro-scale sliding contacts on Au and Au-MoS2 coatings	P. Stoyanov, R. R. Chromik, S. Gupta, J. R. Lince	Surface and Coatings Technology, Band 205, Seiten 1449-1454 (2010)
Microtribological Performance of Au/MoS2 and Ti/MoS2 Coatings with Varying Contact Pressure	P. Stoyanov, R. R. Chromik, D. Goldbaum, J. R. Lince, X. Zhang	Tribology Letters, Band 40 Seiten 199-211 (2010)
Mechanical properties and microstructure characterization of coated AM2 Al 6061-T6 mats exposed to simulated thermal blast	C. Wilhelm, G. LaCaille, N. Wright, N. Ward, C. Shu, R. Painter, C. Vinquist, P. Stoyanov, E.W. Lee, D. Piatkowski, J. McLennan, J. Ogren, C. Kumor, O.S. Es-Said	Engineering Failure Analysis, Band 16, Seiten 1-10 (2009)
Evaluation of the Effects of Powder Coating Cure Temperatures on the Mechanical Properties of Aluminum Alloy Substrates	C. Maldonado, D. Diaz, J. Ranallo, R. Painter, W. Dahir, D. Hassouna, B. Gayer, E. Toss, I. Martinez, P. Stoyanov	Journal of Materials Engineering and Performance, Band 18, Seiten 70-78 (2009)
Micro-tribological performance of MoS2 lubricants with varying Au content	P. Stoyanov, J. Z. Fishman, J. R. Lince, R. R. Chromik	Surface and Coatings Technology Band 203, Seiten 761-765 (2008)
Microstructure Analysis of Aluminum Alloy and Copper Alloy Circular Shells After Multiaxial Plastic Buckling	N. Drusina, R. Mahapatra, A. Abdul-Latif, R. Baleh, C. Wilhelm, P. Stoyanov, O.S. Es-Said	Journal of Materials Engineering and Performance, Band 17, Seiten 755-766 (2008)
Evaluation of Advanced Adhesives for Aerospace Structures	P. Stoyanov, N. Rodriguez, T. Dickinson, D. Huy Nguyen, E. Park, J. Foyos, V. Hernandez, J. Ogren, M. Berg O.S. Es-Said	Journal of Materials Engineering and Performance, Band 17, Seiten 460-464 (2008)
On the bimodal grain growth in zirconium grade 702 alloy	N. Rodriguez, T. Dickinson, D. Huy Nguyen, E. Park, J. Foyos, R. Sutherlin, S. Sparkowich, F. Hogue, P. Stoyanov, J. Ogren, E. Plotkin, O.S. Es-Said	Engineering Failure Analysis, Band 15, Seiten 440-444 (2008)
Quenching methods for Ti-325 alloy	B. Sarrail, C. Schrupp, S. Babakhanyan, K. Muscare, J. Foyos, J. Ogren, P. Stoyanov, S. Sparkowich, R. Sutherlin, R. Clark, O.S. Es-Said	Engineering Failure Analysis, Band 14 Seiten 1401-1405 (2007)
On the correlation between fracture toughness and precipitation hardening heat treatments in 15-5PH Stainless Steel	M. Abdelshehid, K. Mahmodieh, K. Mori, L. Chen, P. Stoyanov, D. Davlantes, J. Foyos, J. Ogren, R. Clark Jr., O.S. Es-Said	Engineering Failure Analysis, Band 14, Seiten 626-631 (2007)
Effect of cold work on the tensile properties of 6061, 2024, and 7075 Al alloys	D. Ortiz, M. Abdelshehid, R. Dalton, J. Soltero, R. Clark, M. Hahn, E. Lee, W. Lightell, B. Pregger, P. Stoyanov, J. Ogren	Journal of Materials Engineering and Performance, Band 16, Seiten 515-520 (2007)

Technical Article
Titel	Autor	Quelle
Microtribology of Solid Lubricant Coatings for MEMS	P. Stoyanov, R. Chromik	Hysitron Corporation: Nanomechanical Testing Applications, Band nanoScratch & ScanningWear (April 2011)