Publikationsliste
New developments of hydrogen impurity online-monitoring in liquid lithium of IFMIF-DONES
Holstein, N.; Krauss, W.; Konys, J.; Saverio Nitti, F.
2024. Nuclear Materials and Energy, 40, Art.-Nr.: 101697. doi:10.1016/j.nme.2024.101697
Holstein, N.; Krauss, W.; Konys, J.; Saverio Nitti, F.
2024. Nuclear Materials and Energy, 40, Art.-Nr.: 101697. doi:10.1016/j.nme.2024.101697
Corrosion behavior and mechanical properties of V–4Cr–4Ti alloy exposed at 500 and 700 °C to static Pb with ∼10^{–9} mass% dissolved oxygen for 1000 h
Tsisar, V.; Nagasaka, T.; Yeliseyeva, O.; Lim, J.; Konys, J.; Muroga, T.; Schroer, C.
2024. Journal of Nuclear Materials, 595, Article no: 155052. doi:10.1016/j.jnucmat.2024.155052
Tsisar, V.; Nagasaka, T.; Yeliseyeva, O.; Lim, J.; Konys, J.; Muroga, T.; Schroer, C.
2024. Journal of Nuclear Materials, 595, Article no: 155052. doi:10.1016/j.jnucmat.2024.155052
High-Temperature Corrosion Behavior of Fe-18Ni-12Cr-2.9Al and Fe-18Ni-12Cr-2.3Al-Nb-C Austenitic Steels Depending on Dissolved Oxygen Concentration in Static Liquid Pb at 700 °C
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.; Schroer, C.
2024. High Temperature Corrosion of Materials, 101 (3), 589–602. doi:10.1007/s11085-024-10233-2
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.; Schroer, C.
2024. High Temperature Corrosion of Materials, 101 (3), 589–602. doi:10.1007/s11085-024-10233-2
Optimisation of ECX permeation barriers towards thicker alumina
Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
2024. Nuclear Materials and Energy, 38, Art.-Nr.: 101581. doi:10.1016/j.nme.2024.101581
Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
2024. Nuclear Materials and Energy, 38, Art.-Nr.: 101581. doi:10.1016/j.nme.2024.101581
Compatibility of EUROFER97 and lead–lithium eutectic
Khanchych, K.; Schroer, C.
2023. Nuclear Materials and Energy, 37, Art.-Nr.: 101527. doi:10.1016/j.nme.2023.101527
Khanchych, K.; Schroer, C.
2023. Nuclear Materials and Energy, 37, Art.-Nr.: 101527. doi:10.1016/j.nme.2023.101527
Optimisation of ECX permeation barriers towards thicker alumina
Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
2023, Oktober 24. 21st International Conference on Fusion Reactor Materials (ICFRM 2023), Granada, Spanien, 22.–27. Oktober 2023
Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
2023, Oktober 24. 21st International Conference on Fusion Reactor Materials (ICFRM 2023), Granada, Spanien, 22.–27. Oktober 2023
Oxidation kinetics at 450–550 °C for Steel T91 in flowing lead–bismuth eutectic (2 m/s, 10
Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.
2023, August 29. Annual Congress of the European Federation of Corrosion (EUROCORR 2023), Brüssel, Belgien, 27.–31. August 2023
Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.
2023, August 29. Annual Congress of the European Federation of Corrosion (EUROCORR 2023), Brüssel, Belgien, 27.–31. August 2023
Liquid metals in concentrating solar power and requirements on structural materials
Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
2023, Juni 13. Helmholtz Energy Conference (2023), Koblenz, Deutschland, 12.–13. Juni 2023
Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
2023, Juni 13. Helmholtz Energy Conference (2023), Koblenz, Deutschland, 12.–13. Juni 2023
Comparison of Corrosion Behavior of T91, 9Cr and 9CrAl ODS Steels in Liquid Pb
Chen, L.; Xu, S.; Schroer, C.; Jia, H.; Ruan, Z.; Qin, B.; Zhou, Z.; Long, B.
2023. Materials, 16 (6), Art.-Nr.: 2295. doi:10.3390/ma16062295
Chen, L.; Xu, S.; Schroer, C.; Jia, H.; Ruan, Z.; Qin, B.; Zhou, Z.; Long, B.
2023. Materials, 16 (6), Art.-Nr.: 2295. doi:10.3390/ma16062295
Development and Basic Qualification Steps towards an Electrochemically Based H-Sensor for Lithium System Applications
Holstein, N.; Krauss, W.; Nitti, F. S.
2023. Journal of Nuclear Engineering, 4 (1), 1–10. doi:10.3390/jne4010001
Holstein, N.; Krauss, W.; Nitti, F. S.
2023. Journal of Nuclear Engineering, 4 (1), 1–10. doi:10.3390/jne4010001
Electrochemical hydrogen detection in DONES loop materials
Holstein, N.; Krauss, W.; Nitti, F. S.
2022. Nuclear Materials and Energy, 31, Art.-Nr. 101192. doi:10.1016/j.nme.2022.101192
Holstein, N.; Krauss, W.; Nitti, F. S.
2022. Nuclear Materials and Energy, 31, Art.-Nr. 101192. doi:10.1016/j.nme.2022.101192
Creep of 316L austenitic steel at 450–550 °C in static lead-bismuth eutectic covered by argon-hydrogen gas
Yurechko, M.; Skrypnik, A.; Wedemeyer, O.; Konys, J.; Schroer, C.
2022. Journal of nuclear materials, 558, Art.-Nr. 153344. doi:10.1016/j.jnucmat.2021.153344
Yurechko, M.; Skrypnik, A.; Wedemeyer, O.; Konys, J.; Schroer, C.
2022. Journal of nuclear materials, 558, Art.-Nr. 153344. doi:10.1016/j.jnucmat.2021.153344
Development of anti-permeation and corrosion barrier coatings for the WCLL breeding blanket of the European DEMO
Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordac, M.; Hernandez, T.; Kunzova, K.; Lorenz, J.; Martelli, D.; Padino, B.; Moroño, A.; Tarantino, M.; Schroer, C.; Spagnuolo, G. A.; Vala, L.; Vanazzi, M.; Venturini, A.
2021. Fusion engineering and design, 170, Art.-Nr. 112453. doi:10.1016/j.fusengdes.2021.112453
Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordac, M.; Hernandez, T.; Kunzova, K.; Lorenz, J.; Martelli, D.; Padino, B.; Moroño, A.; Tarantino, M.; Schroer, C.; Spagnuolo, G. A.; Vala, L.; Vanazzi, M.; Venturini, A.
2021. Fusion engineering and design, 170, Art.-Nr. 112453. doi:10.1016/j.fusengdes.2021.112453
Characterization of aluminum-based coatings after short term exposure during irradiation campaign in the LVR-15 fission reactor
Petráš, R.; Kunzová, K.; Fedoriková, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Paladino, B.; Schroer, C.; Lorenz, J.; Utili, M.; Vála, L.
2021. Fusion Engineering and Design, 170, Art.-Nr.: 112521. doi:10.1016/j.fusengdes.2021.112521
Petráš, R.; Kunzová, K.; Fedoriková, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Paladino, B.; Schroer, C.; Lorenz, J.; Utili, M.; Vála, L.
2021. Fusion Engineering and Design, 170, Art.-Nr.: 112521. doi:10.1016/j.fusengdes.2021.112521
Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C
Chen, L.; Tsisar, V.; Wang, M.; Schroer, C.; Zhou, Z.
2021. Corrosion science, 189, Article no: 109591. doi:10.1016/j.corsci.2021.109591
Chen, L.; Tsisar, V.; Wang, M.; Schroer, C.; Zhou, Z.
2021. Corrosion science, 189, Article no: 109591. doi:10.1016/j.corsci.2021.109591
Electrochemical Deposition of Activating Interlayers for Joining of Tungsten and Steel by Brazing with Copper
Lorenz, J.; Krauss, W.
2021, Juni. Thermec’2021 : International Conference on Processing and Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications (2021), Online, 1.–5. Juni 2021
Lorenz, J.; Krauss, W.
2021, Juni. Thermec’2021 : International Conference on Processing and Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications (2021), Online, 1.–5. Juni 2021
Fundamental Interactions of Steels and Nickel-based Alloys with Lead-based Liquid Alloys or Liquid Tin
Schroer, C.
2021, März 15. 150th TMS Annual Meeting and Exhibition, Symposium on Corrosion in Heavy Liquid Metals for Energy Systems (TMS 2021), Online, 15.–18. März 2021
Schroer, C.
2021, März 15. 150th TMS Annual Meeting and Exhibition, Symposium on Corrosion in Heavy Liquid Metals for Energy Systems (TMS 2021), Online, 15.–18. März 2021
Fundamental Interactions of Steels and Nickel‐based Alloys with Lead‐based Liquid Alloys or Liquid Tin
Schroer, C.
2021. TMS 2021, 150th Annual Meeting & Exhibition, 15th - 18th March, 2021, Supplemental Proceedings. Ed.: The Minerals, Metals & Materials Society, 642–656, Springer US. doi:10.1007/978-3-030-65261-6_58
Schroer, C.
2021. TMS 2021, 150th Annual Meeting & Exhibition, 15th - 18th March, 2021, Supplemental Proceedings. Ed.: The Minerals, Metals & Materials Society, 642–656, Springer US. doi:10.1007/978-3-030-65261-6_58
Effect of oxygen concentration in static Pb–Bi eutectic on corrosion mode of aluminum-alloyed austenitic steels at 550°C for 1000 h
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
2021. Materials science forum, (1024), 79–85. doi:10.4028/www.scientific.net/MSF.1024.79
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
2021. Materials science forum, (1024), 79–85. doi:10.4028/www.scientific.net/MSF.1024.79
Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10
Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
2020. Corrosion science, 174, 108852. doi:10.1016/j.corsci.2020.108852
Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
2020. Corrosion science, 174, 108852. doi:10.1016/j.corsci.2020.108852
Post-irradiation evaluation of Al-based coatings after irradiation in the LVR-15 fission reactor
Kunzová, K.; Rozsypalová, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Schroer, C.; Utili, M.; Vála, L.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Kunzová, K.; Rozsypalová, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Schroer, C.; Utili, M.; Vála, L.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Development of anti-permeation and corrosion barriers for WCLL Breeding Blanket
Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordač, M.; Hernández, T.; Lorenz, J.; Martelli, D.; Paladino, B.; Moroño, A.; Schroer, C.; Spagnuolo, G. A.; Tarantino, M.; Vála, L.; Vanazzi, M.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordač, M.; Hernández, T.; Lorenz, J.; Martelli, D.; Paladino, B.; Moroño, A.; Schroer, C.; Spagnuolo, G. A.; Tarantino, M.; Vála, L.; Vanazzi, M.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Detection of hydrogen as impurity in liquid lithium: electrochemical hydrogen-sensor for IFMIF-DONES
Holstein, N.; Krauss, W.; Nitti, F. S.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Holstein, N.; Krauss, W.; Nitti, F. S.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, 20.–25. September 2020
Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10
Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
2020. Annual Congress of the European Federation of Corrosion (EUROCORR 2020), Online, 7.–11. September 2020
Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
2020. Annual Congress of the European Federation of Corrosion (EUROCORR 2020), Online, 7.–11. September 2020
Research Progress on Compatibility of Liquid Metal and Iron-based Alloy in Lead Cooled Energy Systems
Chen, L.; Zhou, Z.; Schroer, C.
2020. Cailiao Daobao/Materials Reports, 34 (5), 5096–5101. doi:10.11896/cldb.19010064
Chen, L.; Zhou, Z.; Schroer, C.
2020. Cailiao Daobao/Materials Reports, 34 (5), 5096–5101. doi:10.11896/cldb.19010064
Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel
Chen, L.; Wang, M.; Tsisar, V.; Schroer, C.; Zhou, Z.
2020. Materials Research Express, 7 (2), Article No.026533. doi:10.1088/2053-1591/ab71d1
Chen, L.; Wang, M.; Tsisar, V.; Schroer, C.; Zhou, Z.
2020. Materials Research Express, 7 (2), Article No.026533. doi:10.1088/2053-1591/ab71d1
Corrosion Interaction of 9%Cr Ferritic/Martensitic Steels at 450 and 550 °C With Flowing Pb–Bi Eutectic Containing 10⁻⁷ Mass % Dissolved Oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2019. Journal of nuclear engineering and radiation science, 5 (3), Article No.031201. doi:10.1115/1.4041432
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2019. Journal of nuclear engineering and radiation science, 5 (3), Article No.031201. doi:10.1115/1.4041432
Development of an electrochemical sensor for hydrogen detection in liquid lithium for IFMIF-DONES
Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
2019. Fusion engineering and design, 146B, 1441–1445. doi:10.1016/j.fusengdes.2019.02.100
Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
2019. Fusion engineering and design, 146B, 1441–1445. doi:10.1016/j.fusengdes.2019.02.100
Precipitation phenomena during corrosion testing in forced-convection Pb-15.7Li loop PICOLO
Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
2019. Fusion engineering and design, 146B, 1782–1785. doi:10.1016/j.fusengdes.2019.03.034
Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
2019. Fusion engineering and design, 146B, 1782–1785. doi:10.1016/j.fusengdes.2019.03.034
Safety-related studies on heavy-liquid metal technology for advanced reactors in Europe
Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
2019. CD-Rom Proceedings AMNT 2019 - 50. Jahrestagung Kerntechnik / 50th Annual Meeting on Nuclear Technology (AMNT 2019), Berlin, CD-ROM, INFORUM Verlags- und Verwaltungsgesellschaft mbH
Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
2019. CD-Rom Proceedings AMNT 2019 - 50. Jahrestagung Kerntechnik / 50th Annual Meeting on Nuclear Technology (AMNT 2019), Berlin, CD-ROM, INFORUM Verlags- und Verwaltungsgesellschaft mbH
Safety-related studies on heavy-liquid metal technology for advanced reactors in Europe
Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
2019. 50. Jahrestagung Kerntechnik (2019), Berlin, Deutschland, 7.–8. Mai 2019
Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
2019. 50. Jahrestagung Kerntechnik (2019), Berlin, Deutschland, 7.–8. Mai 2019
Electrochemical techniques as innovative tools for fabricating divertor and blanket components in fusion technology
Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
2019. Fusion engineering and design, 146A, 460–464. doi:10.1016/j.fusengdes.2018.12.091
Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
2019. Fusion engineering and design, 146A, 460–464. doi:10.1016/j.fusengdes.2018.12.091
Corrosion in Iron and Steel T91 Caused by Flowing Lead–Bismuth Eutectic at 400 °C and 10⁻⁷ Mass% Dissolved Oxygen
Schroer, C.; Tsisar, V.; Durand, A.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2019. Journal of nuclear engineering and radiation science, 5 (1), 011006/1–12. doi:10.1115/1.4040937
Schroer, C.; Tsisar, V.; Durand, A.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2019. Journal of nuclear engineering and radiation science, 5 (1), 011006/1–12. doi:10.1115/1.4040937
Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration
Yurechko, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.; Konys, J.
2018. Journal of nuclear materials, 512, 423–439. doi:10.1016/j.jnucmat.2018.09.056
Yurechko, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.; Konys, J.
2018. Journal of nuclear materials, 512, 423–439. doi:10.1016/j.jnucmat.2018.09.056
Effect of Structural State and Surface Finishing on Corrosion Behavior of 1.4970 Austenitic Steel at 400 and 500 °C in Flowing Pb-Bi Eutectic With Dissolved Oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. Journal of nuclear engineering and radiation science, 4 (4), 041001. doi:10.1115/1.4040422
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. Journal of nuclear engineering and radiation science, 4 (4), 041001. doi:10.1115/1.4040422
Long-term corrosion behavior of Al-based coatings in flowing Pb–15.7Li, produced by electrochemical ECX process
Wulf, S.-E.; Krauss, W.; Konys, J.
2018. Nuclear materials and energy, 16, 158–162. doi:10.1016/j.nme.2018.06.019
Wulf, S.-E.; Krauss, W.; Konys, J.
2018. Nuclear materials and energy, 16, 158–162. doi:10.1016/j.nme.2018.06.019
Aspects of corrosion of iron- and nickel-based materials by liquid tin: Oxygen dissolved in the melt and saturation with the parent element
Emmerich, T.; Durand, A.; Tsisar, V.; Schroer, C.
2018. Materials and corrosion, 69 (7), 832–849. doi:10.1002/maco.201709896
Emmerich, T.; Durand, A.; Tsisar, V.; Schroer, C.
2018. Materials and corrosion, 69 (7), 832–849. doi:10.1002/maco.201709896
Development of an electrochemical sensor for hydrogen detection in liquid lithium for IFMIF-DONES
Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Precipitation phenomena during corrosion testing in forced-convection Pb-15.7Li loop PICOLO
Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Electrochemical techniques as innovative tools for fabricating divertor and blanket components in fusion technology
Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018
Liquid Metals – a Promising Heat Transfer Media for CSP – Overview on KIT Research
Weisenburger, A.; Hering, W.; Onea, A.; Pacio, J.; Schroer, C.; Wetzel, T.; Stieglitz, R.; Müller, G.
2018. SolarPACES (2018), Casablanca, Marokko, 2.–5. Oktober 2018
Weisenburger, A.; Hering, W.; Onea, A.; Pacio, J.; Schroer, C.; Wetzel, T.; Stieglitz, R.; Müller, G.
2018. SolarPACES (2018), Casablanca, Marokko, 2.–5. Oktober 2018
Experimental activity in Karlsruhe Institute of Technology towards corrosion performance of steels in Pb-Bi eutectic
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. Materials Irradiation Research Meeting in the 30th Fiscal Year: Nuclear materials and their lifetime evaluation (2018), Kyōto, Japan, 27.–28. November 2018
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. Materials Irradiation Research Meeting in the 30th Fiscal Year: Nuclear materials and their lifetime evaluation (2018), Kyōto, Japan, 27.–28. November 2018
Corrosion in aluminium-alloyed austenitic steel caused by static lead-bismuth eutectic: Effect of dissolved oxygen concentration after exposure for 1000 h at 550⁰C
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
2018. GEMMA AFA Workshop (2018), Karlsruhe, Deutschland, 28. November 2018
Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
2018. GEMMA AFA Workshop (2018), Karlsruhe, Deutschland, 28. November 2018
Corrosion caused by liquid lead or lead alloys - overview
Schroer, C.
2018. GEMMA AFA Workshop (2018), Karlsruhe, Deutschland, 28. November 2018
Schroer, C.
2018. GEMMA AFA Workshop (2018), Karlsruhe, Deutschland, 28. November 2018
Effect of oxygen concentration in static Pb at 700⁰C and Pb-Bi eutectic at 550⁰C on corrosion behavior of aluminium-alloyed austenitic steels
Tsisar, V.; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. 14th International Workshop on Spallation Materials Technology (IWSMT 2018), Fukushima, Japan, 11.–16. November 2018
Tsisar, V.; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. 14th International Workshop on Spallation Materials Technology (IWSMT 2018), Fukushima, Japan, 11.–16. November 2018
Effect of oxygen concentration in static Pb-Bi eutectic on corrosion behavior of aluminum-alloyed austenitic steels at 550⁰C for 1000 h
Tsisar Valentyn; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, Vereinigtes Königreich, 22.–28. Juli 2018
Tsisar Valentyn; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, Vereinigtes Königreich, 22.–28. Juli 2018
Practical experience gained from operating the lead-bismuth loop corrida
Schroer, C.; Wedemeyer, O.; Tsisar Valentyn; Skrypnik, A.; Konys, J.
2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, Vereinigtes Königreich, 22.–28. Juli 2018
Schroer, C.; Wedemeyer, O.; Tsisar Valentyn; Skrypnik, A.; Konys, J.
2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, Vereinigtes Königreich, 22.–28. Juli 2018
Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers by ECX process
Wulf, S.-E.; Krauss, W.; Konys, J.
2017. Fusion engineering and design, 124, 1091–1095. doi:10.1016/j.fusengdes.2017.03.115
Wulf, S.-E.; Krauss, W.; Konys, J.
2017. Fusion engineering and design, 124, 1091–1095. doi:10.1016/j.fusengdes.2017.03.115
Long-term corrosion behavior of Al-based coatings in flowing Pb–15.7Li, produced by electrochemical ECX process
Wulf, S.-E.; Krauss, W.; Konys, J.
2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, 5.–17. November 2017
Wulf, S.-E.; Krauss, W.; Konys, J.
2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, 5.–17. November 2017
Effect of Structural State of Austenitic 15-15 Ti Steel on Initiation and Propagation of Solution-Based Corrosion Attack in Flowing Liquid Pb-Bi Eutectic at 400 and 500 °C
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. 25th International Conference on Nuclear Engineering, Volume 2 : Plant Systems, Structures, Components and Materials, Shanghai, China, 2nd - 6th July 2017, Art.Nr. V002T03A056, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE2566634
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. 25th International Conference on Nuclear Engineering, Volume 2 : Plant Systems, Structures, Components and Materials, Shanghai, China, 2nd - 6th July 2017, Art.Nr. V002T03A056, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE2566634
Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 °C to flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. Journal of nuclear materials, 494, 422–438. doi:10.1016/j.jnucmat.2017.07.031
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. Journal of nuclear materials, 494, 422–438. doi:10.1016/j.jnucmat.2017.07.031
Corrosion issues in steels contacting Pb-Bi eutectic at high temperatures. Overview of KIT activity
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. European Commission funded International Workshop ’Materials Resistant to Extreme Conditions for Future Energy Systems’, Kyiv, UA, June 12-14, 2017
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. European Commission funded International Workshop ’Materials Resistant to Extreme Conditions for Future Energy Systems’, Kyiv, UA, June 12-14, 2017
The role of dissolved oxygen in corrosion caused by liquid metals
Schroer, C.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Schroer, C.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Creep behavior of austenitic steel 316L in low oxygen-containing Pb-Bi eutectic at 450-550⁰C
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Effect of structural state of austenitic steel 15-15 Ti on initiation and propagation of solution-based corrosion attack in flowing liquid Pb-Bi eutectic at 400 and 500⁰C
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, 2.–6. Juli 2017
Mechanical characterization of electrochemically based W - Cu joints for low-temperature heat sink application
Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
2017. Fusion engineering and design, 124, 220–225. doi:10.1016/j.fusengdes.2017.05.119
Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
2017. Fusion engineering and design, 124, 220–225. doi:10.1016/j.fusengdes.2017.05.119
Liquid Metals as Efficient High-Temperature Heat-Transport Fluids
Heinzel, A.; Hering, W.; Konys, J.; Marocco, L.; Litfin, K.; Müller, G.; Pacio, J.; Schroer, C.; Stieglitz, R.; Stoppel, L.; Weisenburger, A.; Wetzel, T.
2017. Energy technology, 5 (7), 1026–1036. doi:10.1002/ente.201600721
Heinzel, A.; Hering, W.; Konys, J.; Marocco, L.; Litfin, K.; Müller, G.; Pacio, J.; Schroer, C.; Stieglitz, R.; Stoppel, L.; Weisenburger, A.; Wetzel, T.
2017. Energy technology, 5 (7), 1026–1036. doi:10.1002/ente.201600721
Corrosion in austenitic steels and nickel-based alloys caused by liquid tin at high temperature
Emmerich, T.; Schroer, C.
2017. Corrosion science, 120, 171–183. doi:10.1016/j.corsci.2017.02.025
Emmerich, T.; Schroer, C.
2017. Corrosion science, 120, 171–183. doi:10.1016/j.corsci.2017.02.025
Stability and clusterization of hydrogen-vacancy complexes in B2-FeAl: insight from hydrogen embrittlement
Zhang, G.; Huang, G.; Hu, M.; Yang, F.; Liu, L.; Konys, J.; Tang, T.
2017. RSC Advances, 7 (18), 11094–11100. doi:10.1039/c6ra27936h
Zhang, G.; Huang, G.; Hu, M.; Yang, F.; Liu, L.; Konys, J.; Tang, T.
2017. RSC Advances, 7 (18), 11094–11100. doi:10.1039/c6ra27936h
Evaluation of liquid tin corrosion on austenitic steels as well as nickel-based alloys and first test on possible protective surface layers at high temperature
Emmerich, T.; Schroer, C.
2017. 7th Annual Congress on Materials Research and Technology, Berlin, February 20-21, 2017
Emmerich, T.; Schroer, C.
2017. 7th Annual Congress on Materials Research and Technology, Berlin, February 20-21, 2017
Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers by ECX process
Wulf, S.-E.; Krauss, W.; Konys, J.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016
Wulf, S.-E.; Krauss, W.; Konys, J.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016
Mechanical characterization of electrochemically based W – Cu joints for low-temperature heat sink application
Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016
Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016
Corrosion of 9% Cr ferritic/martensitic steels in flowing Pb-Bi eutectic with 10-7 mass % dissolved oxygen at 450 and 550 °C
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, Volume 1, V001T03A024, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60826
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, Volume 1, V001T03A024, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60826
Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10-7 Mass% solved oxygen
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, V001T03A025, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60845
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, V001T03A025, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60845
Long-term corrosion behavior of ODS-Eurofer in flowing Pb-15.7Li at 550°C
Krauss, W.; Wulf, S.-E.; Konys, J.
2016. Nuclear materials and energy, 9, 512–518. doi:10.1016/j.nme.2016.04.011
Krauss, W.; Wulf, S.-E.; Konys, J.
2016. Nuclear materials and energy, 9, 512–518. doi:10.1016/j.nme.2016.04.011
Effect of post-weld heat treatment on microstructure, hardness and low-temperature impact toughness of electron beam welds of NIFS-HEAT-2 and CEA-J57 heats of V–4Ti–4Cr alloy
Tsisar, V.; Nagasaka, T.; Flem, M. L.; Yeliseyeva, O.; Konys, J.; Muroga, T.
2016. Nuclear materials and energy, 9, 436–440. doi:10.1016/j.nme.2016.04.002
Tsisar, V.; Nagasaka, T.; Flem, M. L.; Yeliseyeva, O.; Konys, J.; Muroga, T.
2016. Nuclear materials and energy, 9, 436–440. doi:10.1016/j.nme.2016.04.002
Creep Behavior Of Ferritic/Martensitic Steel T91 in Oxygen-Containing Pb and LBE at 450–650°C
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–61022, The American Society of Mechanical Engineers (ASME)
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–61022, The American Society of Mechanical Engineers (ASME)
Compatibility of fast reactor structural materials with liquid metal coolants (Part 2)
Konys, J.
2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
Konys, J.
2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
Compatibility of fast reactor structural materials with liquid metal coolants (Part 1)
Konys, J.
2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
Konys, J.
2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
Corrosion behavior of aluminum-based coatings in a liquid metal environment for fusion applications
Konys, J.; Krauss, W.; Wulf, S.-E.
2016. International Symposium on Coatings and Corrosion (ISCC 2016), Kuala Lumpur, MAL, May 16-19, 2016
Konys, J.; Krauss, W.; Wulf, S.-E.
2016. International Symposium on Coatings and Corrosion (ISCC 2016), Kuala Lumpur, MAL, May 16-19, 2016
Compatibility of structural steels with heavy liquid metals (HLMs) for nuclear and fusion applications
Konys, J.
2016. Seminar on Cross-Cutting Issues of Heavy Liquid Metals, Bhabha Atomic Research Center (BARC), Mumbai, IND, February 1, 2016
Konys, J.
2016. Seminar on Cross-Cutting Issues of Heavy Liquid Metals, Bhabha Atomic Research Center (BARC), Mumbai, IND, February 1, 2016
Corrosion behaviorof austenitic steels1.4970 (15-15 Cr Ni), 316L and1.4571 (316-Ti) in flowing low-oxygen LBE with10⁻⁷ mass% of oxygenat 400 to 550°C
Konys, J.; Tsisar Valentyn; Schroer, C.
2016. 17th Asian Pacific Corrosion Control Conference (APCCC 17), Mumbai, IND, January 27-30, 2016
Konys, J.; Tsisar Valentyn; Schroer, C.
2016. 17th Asian Pacific Corrosion Control Conference (APCCC 17), Mumbai, IND, January 27-30, 2016
Advanced Electrochemical Machining (ECM) for tungsten surface micro-structuring in blanket applications
Holstein, N.; Krauss, W.; Konys, J.; Heuer, S.; Weber, T.
2016. Fusion engineering and design, 109-111, Part A, 956–960. doi:10.1016/j.fusengdes.2016.01.045
Holstein, N.; Krauss, W.; Konys, J.; Heuer, S.; Weber, T.
2016. Fusion engineering and design, 109-111, Part A, 956–960. doi:10.1016/j.fusengdes.2016.01.045
Thermomechanical characterization of joints for blanket and divertor application processed by electrochemical plating
Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
2016. Fusion engineering and design, 109, Part B, 1280–1285. doi:10.1016/j.fusengdes.2015.12.043
Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
2016. Fusion engineering and design, 109, Part B, 1280–1285. doi:10.1016/j.fusengdes.2015.12.043
Corrosion resistance of Al-based coatings in flowing Pb-15.7Li produced by aluminum electrodeposition from ionic liquids
Wulf, S. E.; Krauss, W.; Konys, J.
2016. Nuclear materials and energy, 9, 519–523. doi:10.1016/j.nme.2016.03.008
Wulf, S. E.; Krauss, W.; Konys, J.
2016. Nuclear materials and energy, 9, 519–523. doi:10.1016/j.nme.2016.03.008
Analysis of the interaction between liquid tin and austenitic steels, nickel-based alloys as well as protective surface layers at high temperature
Emmerich, T.; Schroer, C.
2016. Junior EUROMAT 2016, Lausanne, CH, July 10-14, 2016
Emmerich, T.; Schroer, C.
2016. Junior EUROMAT 2016, Lausanne, CH, July 10-14, 2016
Corrosion of 9%Cr ferritic / martensitic steels at 450 and 550⁰C in flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60826, The American Society of Mechanical Engineers (ASME)
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60826, The American Society of Mechanical Engineers (ASME)
Corrosion of 9%Cr ferritic / martensitic steels at 450 and 550⁰C in flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016
Creep Behavior Of Ferritic/Martensitic Steel T91 in Oxygen-Containing Pb and LBE at 450–650°C
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10⁻⁷ mass% solved oxygen
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60845, The American Society of Mechanical Engineers (ASME)
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60845, The American Society of Mechanical Engineers (ASME)
Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10⁻⁷ mass% solved oxygen
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
Long-term corrosion of austenitic steels in flowing LBE at 400 ⁰C and 10-7 mass% dissolved oxygen in comparison with 450 and 550 ⁰C
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. Journal of Nuclear Materials, 468, 305–312. doi:10.1016/j.jnucmat.2015.09.027
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. Journal of Nuclear Materials, 468, 305–312. doi:10.1016/j.jnucmat.2015.09.027
Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead-bismuth eutectic at 450 and 550 ⁰C
Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. Journal of Nuclear Materials, 469, 162–176. doi:10.1016/j.jnucmat.2015.11.058
Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2016. Journal of Nuclear Materials, 469, 162–176. doi:10.1016/j.jnucmat.2015.11.058
Corrosion resistance of Al-based coatings in flowing Pb-15.7Li produced by aluminum electrodeposition from ionic liquids
Wulf, S. E.; Krauss, W.; Konys, J.
2015. ICFRM-17, Aachen, 11.-16.10.2015
Wulf, S. E.; Krauss, W.; Konys, J.
2015. ICFRM-17, Aachen, 11.-16.10.2015
Long-term corrosion behavior of ODS-Eurofer in flowing Pb-15.7Li at 550°C
Krauss, W.; Wulf, S.-E.; Konys, J.
2015. ICFRM-17, Aachen, 11.-16.10.2015
Krauss, W.; Wulf, S.-E.; Konys, J.
2015. ICFRM-17, Aachen, 11.-16.10.2015
Thermomechanical characterization of joints for blanket and divertor application processed by electrochemical plating
Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
Advanced Electrochemical Machining (ECM) for tungsten surface micro-structuring in blanket applications
Holstein, N.; Krauss, W.; Lorenz, J.; Konys, J.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
Holstein, N.; Krauss, W.; Lorenz, J.; Konys, J.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
Compatibility of structural steels with heavy liquid metals (HLMs): From a cross-cutting view
Konys, J.
2015. MatiSSE Workshop on Cross-Cutting Issues in Structural Materials R&D, Petten, NL, November 25-26, 2015
Konys, J.
2015. MatiSSE Workshop on Cross-Cutting Issues in Structural Materials R&D, Petten, NL, November 25-26, 2015
Materials compatibility in heavy liquid metals for ADS applications
Konys, J.
2015. 1st Topical Meeting on Asian Network for Accelerator-Driven Systems and Nuclear Transmutation Technology, Tokai, J, October 26-27, 2015
Konys, J.
2015. 1st Topical Meeting on Asian Network for Accelerator-Driven Systems and Nuclear Transmutation Technology, Tokai, J, October 26-27, 2015
Needs and gaps in the development of aluminum-based corrosion and T-permeation barriers for DEMO blankets
Wulf, S.-E.; Krauss, W.; Konys, J.
2015. Fusion Engineering and Design, 98-99, 2098–2102. doi:10.1016/j.fusengdes.2015.04.057
Wulf, S.-E.; Krauss, W.; Konys, J.
2015. Fusion Engineering and Design, 98-99, 2098–2102. doi:10.1016/j.fusengdes.2015.04.057
Liquie-metal corrosion of steel in HLM
Schroer, C.
2015. Heavy Liquid Metal Summer School, Mol, B, June 15-19, 2015
Schroer, C.
2015. Heavy Liquid Metal Summer School, Mol, B, June 15-19, 2015
Effect of post-weld heat treatment on microstructure, hardness and impact toughness at 77 K of electron beam welds of NIFS-HEAT-2 and CEA-J57 heats of V-4Ti-4Cr alloy
Tsisar, V.; Nagasaka, T.; Le Flem, M.; Yeliseyeva, O.; Konys, J.; Muroga, T.
2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
Tsisar, V.; Nagasaka, T.; Le Flem, M.; Yeliseyeva, O.; Konys, J.; Muroga, T.
2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
Materials research for energy supply at Karlsruhe Institute of Technology
Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015
Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015
Influence of cold work on solution-based corrosion attack on 1.4970 (15-15Ti) austenitic steel in static liquid lead-bismuth eutectic at 550⁰C and <= 10⁻⁸ mass % dissolved oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
Characterization of silicon-containing ferritic/martensitic steel after exposure to oxygen -containing flowing lead-bismuth eutectic at 450 and 550⁰C
Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
Influence of cold work on solution-based corrosion attack on 1.4970 (15-15Ti) austenitic steel in static liquid lead-bismuth eutectic at 550⁰C and <= 10⁻⁸ mass % dissolved oxygen
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy, ICONE 2015, Makuhari MesseChiba, Japan; 17 May 2015 - 21 May 2015 Proceedings, ICONE23–1045, The American Society of Mechanical Engineers (ASME)
Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
2015. 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy, ICONE 2015, Makuhari MesseChiba, Japan; 17 May 2015 - 21 May 2015 Proceedings, ICONE23–1045, The American Society of Mechanical Engineers (ASME)
Materials research for energy supply at Karlsruhe Institute of Technology
Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015
Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015
Tungsten - an overview of production, basic properties, processing and applications
Armstrong, D.; Hoffmann, A.; Knabl, W.; Schulmeyer, W.; Traxler, H.; Antusch, S.; Commin, L.; Krauss, W.; Nemeth, A.; Reiser, J.
2013. Workshop on Tungsten for Nuclear Applications, Oxford, GB, September 23-25, 2013
Armstrong, D.; Hoffmann, A.; Knabl, W.; Schulmeyer, W.; Traxler, H.; Antusch, S.; Commin, L.; Krauss, W.; Nemeth, A.; Reiser, J.
2013. Workshop on Tungsten for Nuclear Applications, Oxford, GB, September 23-25, 2013
A brief summary of the progress on the EFDA tungsten materials
Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
2013. Journal of Nuclear Materials / Supplement 1, 442 (1-3), S173-S180. doi:10.1016/j.jnucmat.2013.03.062
Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
2013. Journal of Nuclear Materials / Supplement 1, 442 (1-3), S173-S180. doi:10.1016/j.jnucmat.2013.03.062
Recent progress in research on tungsten materials for nuclear fusion applications in Europe
Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
2013. Journal of Nuclear Materials, 432, 482–500. doi:10.1016/j.jnucmat.2012.08.018
Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
2013. Journal of Nuclear Materials, 432, 482–500. doi:10.1016/j.jnucmat.2012.08.018
Assessment of the physics and technology requirements for a fusion DEMO
Wolf, R. C.; Aktaa, J.; Antusch, S.; Biel, W.; Boccaccini, L. V.; Bornschein, B.; Brezinsek, S.; Cismondi, F.; Day, C.; Demange, D.; Fantz, U.; Fietz, W.; Franzen, P.; Gantenbein, G.; Ghidersa, B. E.; Giegerich, T.; Gunter, S.; Hauer, V.; Heller, R.; Hesch, K.; Igitkhanov, Y.; Kallenbach, A.; Kern, S.; Knitter, R.; Konig, R.; Konys, J.; Koslowski, H. R.; Lackner, K.; Landman, I.; Lehnen, M.; Lietzow, R.; Linke, J.; Linsmeier, C.; Meister, H.; Mertens, P.; Mittwollen, M.; Moslang, A.; Neubauer, O.; Noe, M.; Norajitra, P.; Noterdaeme, J. M.; Pautasso, G.; Phillips, V.; Reiter, D.; Rieth, M.; Roth, J.; Tardini, G.; Treutterer, W.; Schauer, F.; Schlachter, S.; Strauß, D.; Unterberg, B.; Weiss, K.; You, J. H.; Zohm, H.
2011. Integration of Fusion Science and Technology for Steady State Operation : 21st Internat.Toki Conf., Toki City, Gifu, J, November 28 - December 1, 2011
Wolf, R. C.; Aktaa, J.; Antusch, S.; Biel, W.; Boccaccini, L. V.; Bornschein, B.; Brezinsek, S.; Cismondi, F.; Day, C.; Demange, D.; Fantz, U.; Fietz, W.; Franzen, P.; Gantenbein, G.; Ghidersa, B. E.; Giegerich, T.; Gunter, S.; Hauer, V.; Heller, R.; Hesch, K.; Igitkhanov, Y.; Kallenbach, A.; Kern, S.; Knitter, R.; Konig, R.; Konys, J.; Koslowski, H. R.; Lackner, K.; Landman, I.; Lehnen, M.; Lietzow, R.; Linke, J.; Linsmeier, C.; Meister, H.; Mertens, P.; Mittwollen, M.; Moslang, A.; Neubauer, O.; Noe, M.; Norajitra, P.; Noterdaeme, J. M.; Pautasso, G.; Phillips, V.; Reiter, D.; Rieth, M.; Roth, J.; Tardini, G.; Treutterer, W.; Schauer, F.; Schlachter, S.; Strauß, D.; Unterberg, B.; Weiss, K.; You, J. H.; Zohm, H.
2011. Integration of Fusion Science and Technology for Steady State Operation : 21st Internat.Toki Conf., Toki City, Gifu, J, November 28 - December 1, 2011
Review of the EFDA programme on tungsten materials technology and science
Rieth, M.; Boutard, J. L.; Dudarev, S. L.; Ahlgren, T.; Antusch, S.; Baluc, N.; Barthe, M. F.; Becquart, C. S.; Ciupinski, L.; Correia, J. B.; Domain, C.; Fikar, J.; Fortuna, E.; Fu, C. C.; Gaganidze, E.; Galan, T. L.; Garcia-Rosales, C.; Gludovatz, B.; Greuner, H.; Heinola, K.; Holstein, N.; Juslin, N.; Koch, F.; Krauss, W.; Kurzydlowski, K. J.; Linke, J.; Linsmeier, C.; Luzginova, N.; Maier, H.; Martinez, M. S.; Missiaen, J. M.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Norajitra, P.; Opschoor, J.; Pintsuk, G.; Pippan, R.; Ritz, G.; Romaner, L.; Rupp, D.; Schäublin, R.; Schlosser, J.; Uytdenhouwen, I.; Laan, J. G. van der; Veleva, L.; Ventelon, L.; Wahlberg, S.; Willaime, F.; Wurster, S.; Yar, M. A.
2011. Journal of Nuclear Materials, 417, 463–467. doi:10.1016/j.jnucmat.2011.01.075
Rieth, M.; Boutard, J. L.; Dudarev, S. L.; Ahlgren, T.; Antusch, S.; Baluc, N.; Barthe, M. F.; Becquart, C. S.; Ciupinski, L.; Correia, J. B.; Domain, C.; Fikar, J.; Fortuna, E.; Fu, C. C.; Gaganidze, E.; Galan, T. L.; Garcia-Rosales, C.; Gludovatz, B.; Greuner, H.; Heinola, K.; Holstein, N.; Juslin, N.; Koch, F.; Krauss, W.; Kurzydlowski, K. J.; Linke, J.; Linsmeier, C.; Luzginova, N.; Maier, H.; Martinez, M. S.; Missiaen, J. M.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Norajitra, P.; Opschoor, J.; Pintsuk, G.; Pippan, R.; Ritz, G.; Romaner, L.; Rupp, D.; Schäublin, R.; Schlosser, J.; Uytdenhouwen, I.; Laan, J. G. van der; Veleva, L.; Ventelon, L.; Wahlberg, S.; Willaime, F.; Wurster, S.; Yar, M. A.
2011. Journal of Nuclear Materials, 417, 463–467. doi:10.1016/j.jnucmat.2011.01.075
Structural and functional materials
Aktaa, J.; Rieth, M.; Knitter, R.; Konys, J.; Landman, I.; You, J. H.; Linsmeier, C.; Linke, J.; Mertens, P.
2011. Follow-up Workshop on R&D Towards DEMO, IPP Garching, May 2-3, 2011
Aktaa, J.; Rieth, M.; Knitter, R.; Konys, J.; Landman, I.; You, J. H.; Linsmeier, C.; Linke, J.; Mertens, P.
2011. Follow-up Workshop on R&D Towards DEMO, IPP Garching, May 2-3, 2011