Publications

Chemo-elasto-electro free energy of non-uniform system in the diffuse interface context
Cai, Y.; Wang, F.; Zhang, H.; Nestler, B.
2024. Journal of Physics: Condensed Matter, 36, Article no: 495702. doi:10.1088/1361-648X/ad7660

Hot corrosion behavior of Mo–Si–Ti alloys
Beck, K.; König, T.; Senvardarli, E.; Hinrichs, F.; Heilmaier, M.; Galetz, M. C.
2024. Materials and Corrosion, 75 (12), 1610–1619. doi:10.1002/maco.202414491

Overcoming Fundamental Barriers for Novel Refractory High Temperature Candidate Alloys
Kauffmann, A.; Obert, S.; Schliephake, D.; Hinrichs, F.; Winkens, G.; Falcão, G.; Eusterholz, M.; Tirunilai, A. S.; Gombola, C.; Thota, H.; Cong, X.; Beichert, B.; Kramer, L. K.; Gorr, B.; Christ, H.-J.; Eggeler, Y.; Galetz, M. C.; Inui, H.; Heilmaier, M.
2024, November 28. Seminar des Lehrstuhls für Allgemeine Werkstoffeigenschaften, Friedrich-Alexander-Universität Erlangen Erlangen-Nürnberg (2024), Erlangen, Germany, November 28, 2024

Data from "Overcoming barriers for high temperature alloys: oxidation and ductility"
Hinrichs, F.; Winkens, G.; Kramer, L. K.; Falcão, G.; Schliephake, D.; Eusterholz, M. K.; Galetz, M. C.; Inui, H.; Kauffmann, A.; Heilmaier, M.
2024, October 30. doi:10.35097/y6memvsjw6bkm7x2

Unveiling the Intricacies of Ductile-Phase Toughened Intermetallics: An In-depth Exploration of the "Mo-Si-Ti Ternary System" and its Mechanical Behavior
Raja Jothi, V.; Schliephake, D.; Kaufmann, A.; Choudhury, A.; Suwas, S.; Heilmaier, M.
2024, September 26. Materials Science and Engineering Congress (MSE 2024), Darmstadt, Germany, September 24–26, 2024

Development of ductile and oxidation resistant Cr-Mo-Si alloys
Falcão, G.; Hinrichs, F.; Schliephake, D.; Winkens, G.; Galetz, M. C.; Kauffmann, A.; Pundt, A.; Heilmaier, M.
2024, September 26. Materials Science and Engineering Congress (MSE 2024), Darmstadt, Germany, September 24–26, 2024

Misoriented lamellar microstructures in Mo‐Si‐Ti alloy due to asymmetrical nucleation distance and interfacial energies: A phase‐field analysis
Cai, Y.; Wang, F.; Nestler, B.
2024. Advanced Engineering Materials, 26 (17), 2302082. doi:10.1002/adem.202302082

The Creep‐induced Micro‐ and Nanostructural Evolution of a Eutectic Mo‐Si‐Ti Alloy at 1200 °C
Schliephake, D.; Thota, H.; Kauffmann, A.; Wu, H.; Pundt, A.; Heilmaier, M.; Eggeler, Y. M.
2024. Advanced Engineering Materials, 26 (17), 2301909. doi:10.1002/adem.202301909

Oxidation Resistance and Microstructural Analysis of Polymer‐Derived (HfₓTa₁₋ₓ )C/SiC Ceramic Nanocomposites
Petry, N.-C.; Thor, N.; Bernauer, J.; Ulrich, A. S.; Ionescu, E.; Riedel, R.; Pundt, A.; Galetz, M. C.; Lepple, M.
2024. Advanced Engineering Materials, 26 (17), Article no: 230202. doi:10.1002/adem.202302023

Microstructure Characterization and Mechanical Properties of Polymer‐Derived (HfₓTa₁₋ₓ)C/SiC Ceramic Prepared upon Field‐Assisted Sintering Technique (FAST/SPS)
Thor, N.; Winkens, G.; Bernauer, J.; Petry, N.-C.; Beck, K.; Wang, J.; Schwaiger, R.; Riedel, R.; Kolb, U.; Lepple, M.; Pundt, A.
2024. Advanced Engineering Materials, 26 (17), 2301841. doi:10.1002/adem.202301841

Unveiling the Intricacies of a Ductile‐Phase Toughened Intermetallic: An In‐depth Exploration of a Eutectic Mo‐Si‐Ti Alloy and its Mechanical Behavior
Vikram, R. J.; Aramanda, S. K.; Schliephake, D.; Kauffmann, A.; Choudhury, A.; Heilmaier, M.; Suwas, S.
2024. Advanced Engineering Materials, 26 (17), Art.-Nr.: 2301843. doi:10.1002/adem.202301843

Polymer‐Derived Ceramic Coatings with Excellent Thermal Cycling Stability
Bernauer, J.; Kredel, S. A.; Ionescu, E.; Riedel, R.
2024. Advanced Engineering Materials, 26 (17). doi:10.1002/adem.202301820

Exceptional hardness and thermal properties of SiC/(Hf,Ta)C(N)/ (B)C ceramic composites derived from single‐source precursor
Bernauer, J.; Petry, N.-C.; Thor, N.; Kredel, S. A.; Teja Teppala, D.; Galetz, M.; Lepple, M.; Pundt, A.; Ionescu, E.; Riedel, R.
2024. Advanced Engineering Materials, 26 (17). doi:10.1002/adem.202301864

Overcoming Barriers for High Temperature Alloys: Oxidation and Ductility
Heilmaier, M.; Hinrichs, F.; Winkens, G.; Kramer, L. K.; Schliephake, D.; Falcão, G.; Christian Galetz, M.; Inui, H.; Kauffmann, A.
2024, August 21. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024

A Novel Pesting Resistant Cr-Si-Mo Alloy
Hinrichs, F.; Kauffmann, A.; Schliephake, D.; Beck, K.; Christian Galetz, M.; Long, Z.; Thota, H.; Pundt, A.; Heilmaier, M.
2024, August 20. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024

Gefüge und Oxidationsbeständigkeit einphasiger und mehrphasiger Cr-Mo-Si-Legierungen. PhD dissertation
Hinrichs, F.
2024, August 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172819

Development of ductile and oxidation resistant Cr-Mo-Si solid solution alloys
Falcão, G.; Hinrichs, F.; Schliephake, D.; Galetz, M. C.; Pundt, A.; Kauffmann, A.; Heilmaier, M.
2024, March 11. International Conference on Resource Chemistry (ICRC 2024), Alzenau in Unterfranken, Germany, March 11–13, 2024

Influence of interfaces on the plastic deformation of Mo-Si-Ti alloy
Ramdoss, S. R.; Kauffmann, A.; Winkens, G.; Schliephake, D.; Galgon, F.; Zenk, C.; Heilmaier, M.; Schwaiger, R.
2024, March 11. International Conference on Resource Chemistry (ICRC 2024), Alzenau in Unterfranken, Germany, March 11–13, 2024

Thermal Conductivity Analysis of Polymer‐Derived Nanocomposite via Image‐Based Structure Reconstruction, Computational Homogenization, and Machine Learning
Fathidoost, M.; Yang, Y.; Thor, N.; Bernauer, J.; Pundt, A.; Riedel, R.; Xu, B.-X.
2024. Advanced Engineering Materials. doi:10.1002/adem.202302021

Heterogeneous oxidation behavior and kinetic mechanisms of SiBCN ceramic with structure of MA-SiBCN coated by PDCs-SiBCN
Niu, Z.- bo; Li, D.; Jia, D.; Yang, Z.; Lin, K.; Colombo, P.; Riedel, R.; Zhou, Y.
2024. Journal of the European Ceramic Society, 44 (3), 1520–1533. doi:10.1016/j.jeurceramsoc.2023.10.040

Overcoming the Fundamental Barriers for Novel Refractory High Temperature Alloys: Oxidation and Ductility
Hinrichs, F.; Winkens, G.; Kramer, L. K.; Schliephake, D.; Falcão, G.; Galetz, M. C.; Inui, H.; Kauffmann, A.; Heilmaier, M.
2024, February 9. BCC Superalloy Network Opening Workshop (BCC-Snow 2024), Reutte, Austria, February 8–9, 2024

Oxidation behavior of amorphous and nanocrystalline SiBCN ceramics – Kinetic consideration and microstructure
Niu, Z.; Li, D.; Jia, D.; Yang, Z.; Lin, K.; Riedel, R.; Colombo, P.; Zhou, Y.
2024. Advanced Powder Materials, 3 (1), Article no: 100163. doi:10.1016/j.apmate.2023.100163

Heterogeneous oxidation of different atomic clusters in amorphous SiBCN ceramic associated with phase separation
Niu, Z.- bo; Li, D.; Jia, D.; Yang, Z.; Lin, K.; Colombo, P.; Riedel, R.; Zhou, Y.
2024. Corrosion Science, 227, Article no: 111723. doi:10.1016/j.corsci.2023.111723

Comparative study on the microstructure evolution and crystallization behavior of precursor-derived and mechanical alloying derived SiBCN
Niu, Z.- bo; Li, D.; Jia, D.; Yang, Z.; Lin, K.; Wang, D.; He, Y.; Zhou, G.; Colombo, P.; Riedel, R.; Zhou, Y.
2024. Journal of the European Ceramic Society, 44 (2), 668–678. doi:10.1016/j.jeurceramsoc.2023.09.046

Raw Data to "Overcoming barriers for high temperature alloys: oxidation and ductility"
Hinrichs, F.; Winkens, G.; Kramer, L. K.; Schliephake, D.; Falcão, G.; Galetz, M. C.; Inui, H.; Kauffmann, A.; Heilmaier, M.
2024, January 11. doi:10.35097/1866

Hot Corrosion behaviour of Mo-based Alloys
Korell, L.; Beck, K.; Hinrichs, F.; Falcão, G.; Köni, T.; Oskay, C.; Heilmaier, M.; Galetz, M. C.
2024. Annual Congress of the European Federation of Corrosion (EUROCORR 2024), Paris, France, September 1–5, 2024

Thermodynamic assesment of Cr-Mo-Si system
Chitra, A. R.; Gorr, B.
2024. 51st International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2024), Mannheim, Germany, May 26–31, 2024

Microstructural Influencing Factors on Susceptibility of High-Strength Steels against Hydrogen Embrittlement
Nurak, I.; Brilz, M.
2024. 87. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM 2024), Berlin, Germany, March 17–22, 2024

Small scale deformation of a eutectic Mo-Si-Ti alloy
Ramdoss, S. R.; Kauffmann, A.; Winkens, G.; Schliephake, D.; Galgon, F.; Zenk, C.; Schwaiger, R.; Heilmaier, M.
2024. Materials Science and Engineering Congress (MSE 2024), Darmstadt, Germany, September 24–26, 2024

Modelling atomic and nanoscale structure in the silicon–oxygen system through active machine learning
Erhard, L. C.; Rohrer, J.; Albe, K.; Deringer, V. L.
2024. Nature Communications, 15 (1), Art.-Nr.: 1927. doi:10.1038/s41467-024-45840-9

Mechanical Characterization Potentials of Aluminide Diffusion Coatings on Molybdenum Substrates
Filipovic, J.; Beck, K.; Kontermann, C.; Galetz, M.; Oechsner, M.
2024. Advanced Engineering Materials. doi:10.1002/adem.202302027

The Influence of Mo Content and Annealing on the Oxidation Behavior of Arc‐Melted Cr– x Mo–8Si Alloys
Koliotassis, L.; White, E. M. H.; Galetz, M. C.
2024. Advanced Engineering Materials, Artkl.Nr.: 2301906. doi:10.1002/adem.202301906

High-temperature Stability in Harsh Enviroments
Korell, L.
2024. International Conference on Resource Chemistry (ICRC 2024), Alzenau in Unterfranken, Germany, March 11–13, 2024

Solid solution strengthening in single phase Mo alloys
Winkens, G.; Kauffmann, A.; Schwaiger, R.; Heilmaier, M.
2024. International Conference on Resource Chemistry (ICRC 2024), Alzenau in Unterfranken, Germany, March 11–13, 2024

Thermodynamic assessment of the Mo‐Si system
Czerny, A. K.; Ma, W.; Hausner, C. S.; Franke, P.; Rohde, M.; Seifert, H. J.
2024. Advanced Engineering Materials, Artk.Nr.: 230208. doi:10.1002/adem.202302085

Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M.
2024. Advanced Engineering Materials, 26 (17), 2301797. doi:10.1002/adem.202301797

Tailoring layered Csf/SiBCN composites with pseudoplastic fracture behavior: Strengthening and toughening mechanisms
Dou, W.; Li, D.; Wang, B.; Cai, D.; Yang, Z.; Jia, D.; Riedel, R.; Qin, S.; Zhou, Y.
2024. Journal of the American Ceramic Society, 107 (1), 404–416. doi:10.1111/jace.19414

Aluminide diffusion coatings for improving the pesting behavior of refractory metals
Beck, K.; Ulrich, A. S.; Czerny, A. K.; White, E. M. H.; Heilmaier, M.; Galetz, M. C.
2024. Surface and Coatings Technology, 476, Art.-Nr.: 130205. doi:10.1016/j.surfcoat.2023.130205

Overcoming barriers for high temperature alloys: oxidation and ductility
Hinrichs, F.; Winkens, G.; Kramer, L. K.; Schliephake, D.; Falcão, G.; Galetz, M. C.; Inui, H.; Kauffmann, A.; Heilmaier, M.
2023. doi:10.5445/IR/1000166092

Microstructure control of porous Si3N4 whisker scaffolds by in-situ carbothermal reduction and nitridation reaction
Li, M.; Mo, R.; Zhou, J.; Zhang, C.; Cui, X.; Ye, F.; Cheng, L.; Riedel, R.
2023. Journal of the European Ceramic Society, 43 (16), 7354–7362. doi:10.1016/j.jeurceramsoc.2023.07.066

Model code to "Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys"
Winkens, G.
2023, November 2. doi:10.35097/1786

Phase-field investigation on the microstructural evolution of eutectic transformation and four-phase reaction in Mo-Si-Ti system
Cai, Y.; Wang, F.; Czerny, A.; Seifert, H. J.; Nestler, B.
2023. Acta Materialia, 258, Art.-Nr.: 119178. doi:10.1016/j.actamat.2023.119178

Oxidation behaviour of uncoated and PDC-SiAlOC glass-coated TiAl at 750 °C in dry and humid air
Bik, M.; Galetz, M.; Mengis, L.; White, E.; Wieczorek, W.; Łyszczarz, K.; Mroczka, K.; Marchewka, J.; Sitarz, M.
2023. Applied Surface Science, 632, Article no: 57601. doi:10.1016/j.apsusc.2023.157601

Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium
Petry, N.-C.; Bik, M.; Wilk, Ł.; Swadźba, R.; Ulrich, A. S.; Sitarz, M.; Lepple, M.; Galetz, M. C.
2023. Surface and Coatings Technology, 474, Article no: 130049. doi:10.1016/j.surfcoat.2023.130049

Solid solution strengthening in Mo-Nb modelled using the Suzuki approach
Winkens, G.
2023, August 3. doi:10.35097/1658

Temperature‐dependent mechanical and oxidation behavior of in situ formed ZrN/ZrO 2 ‐containing Si 3 N 4 ‐based composite
Liu, J.; Li, W.; Ricohermoso, E., III; Qiao, Z.; Dai, Q.; Liu, X.; Xie, W.; Ionescu, E.; Weidenkaff, A.; Riedel, R.
2023. Journal of the American Ceramic Society, 106 (8), 4931–4943. doi:10.1111/jace.19146

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers
Li, W.; Widenmeyer, M.; Ding, J.; Jiang, T.; Feldmann, L.; Liu, J.; Molina-Luna, L.; Weidenkaff, A.; Riedel, R.; Yu, Z.
2023. Ceramics International. doi:10.1016/j.ceramint.2023.08.123

Simulation of dendritic–eutectic growth with the phase-field method
Seiz, M.; Kellner, M.; Nestler, B.
2023. Acta Materialia, 254, Art.-Nr.: 118965. doi:10.1016/j.actamat.2023.118965

Composition-dependent structural characteristics and mechanical properties of amorphous SiBCN ceramics by ab-initio calculations
Liu, Y.; Zhou, Y.; Jia, D.; Yang, Z.; Duan, W.; Li, D.; Li, S.; Riedel, R.; Liu, B.
2023. Journal of Advanced Ceramics, 12 (5), 984–1000. doi:10.26599/JAC.2023.9220733

Model code to "The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys"
Winkens, G.
2023, March 28. doi:10.5445/IR/1000157208

Raw Data to "The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys"
Winkens, G.; Kauffmann, A.
2023, March 28. doi:10.5445/IR/1000157205

Flexible powder production for additive manufacturing of refractory metal alloys
Hinrichs, F.; Schliephake, D.; Kauffmann, A.; Seils, S.; Obert, S.; Ratschbacher, K.; Allen, M.; Pundt, A.; Heilmaier, M.
2023, March 23. 4th International Conference on Electron Beam Additive Manufacturing (EBAM 2023), Erlangen, Germany, March 22–24, 2023

Significant improvement of ultra-high temperature oxidation resistance of C/SiC composites upon matrix modification by SiHfBCN ceramics
Xu, X.; Luan, X.; Zhang, J.; Cao, X.; Zhao, D.; Cheng, L.; Riedel, R.
2023. Composites Part B: Engineering, 253, Article no: 110553. doi:10.1016/j.compositesb.2023.110553

Assessing the Structural Integrity of Plasma-Sprayed Multilayer Thermal Barrier Coatings
Adam, M.; Kontermann, C.; Oechsner, M.
2023. Journal of Engineering for Gas Turbines and Power, 145 (3), Art.-Nr.: 031014. doi:10.1115/1.4055668

Data-driven thermal and percolation analyses of 3D composite structures with interface resistance
Fathidoost, M.; Yang, Y.; Oechsner, M.; Xu, B.-X.
2023. Materials & Design, 227, Art.-Nr.: 111746. doi:10.1016/j.matdes.2023.111746

Influence of surface treatment on the metal dusting behavior of alloy 699 XA
White, E.; Schlereth, C.; Lepple, M.; Hattendorf, H.; Nowak, B.; Galetz, M. C.
2023. Materials and Corrosion, 74 (2), 190–196. doi:10.1002/maco.202213380

Mechanical response of pesting-resistant Mo-Si-Ti alloys for high temperature applications
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Winkens, G.; Wu, H.; Thota, H.; Eggeler, Y.; Mücklich, F.; Engstler, M.; Gorr, B.; Heilmaier, M.
2023, January 6. International Conference on Plasticity, Damage, and Fracture (ICPDF 2023), Punta Cana, Dominican Republic, January 3–9, 2023

Thermal conductivity analysis of polymer-derived nano-composite via image-base structure reconstruction, computational homogenization and machine learning
Fathidoost, M.; Yang, Y.
2023. doi:10.5281/zenodo.10213660

Deformation mechanisms in Mo-based alloys evaluated by modelling of solid solution strengthening
Winkens, G.; Kauffmann, A.; Herrmann, J. K.; Czerny, A. K.; Obert, S.; Seils, S.; Boll, T.; Baruffi, C.; Rao, Y.; Curtin, W. A.; Schwaiger, R.; Heilmaier, M.
2023. FEMS Euromat (2023), Frankfurt am Main, Germany, September 3–7, 2023

Influence of copper and aluminum substitution on high‐temperature oxidation of the FeCoCrNiMn “Cantor” alloy
Bürckner, M.-L.; Mengis, L.; White, E. M. H.; Galetz, M. C.
2023. Materials and Corrosion, 74 (1), 79–90. doi:10.1002/maco.202213382

Novel Cr/Si-Slurry Diffusion Coatings for High Temperatures
Kerbstadt, M.; White, E. M. H.; Galetz, M. C.
2023. Materials, 16, Article no: 7480. doi:10.3390/ma16237480

A Review of the Synthesis of Compositionally Complex Ultrahigh-Temperature Ceramics
Teja Teppala, D.; Kredel, S. A.; Ionescu, E.; Matovic, B.
2023. Journal of Innovative Materials in Extreme Conditions, 4 (2), 77–103

Mo-Si-Ti Ternary Phase Diagram Evaluation
Bondar, A.; Lukas, H. L.; Czerny, A. K.; Romaka, V.
2023. MSI Eureka, 97, 10.18571.2.8. doi:10.7121/msi-eureka-10.18571.2.8

Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance
Beck, K.; Hinrichs, F.; Oskay, C.; Ulrich, A. S.; Heilmaier, M.; Galetz, M. C.
2023. Coatings, 13 (10), 1712. doi:10.3390/coatings13101712

Tailoring magnetic hysteresis of additive manufactured Fe-Ni permalloy via multiphysics-multiscale simulations of process-property relationships
Yang, Y.; Oyedeji, T. D.; Zhou, X.; Albe, K.; Xu, B.-X.
2023. npj Computational Materials, 9 (1), Art.-Nr.: 103. doi:10.1038/s41524-023-01058-9

Polymer-derived ceramic (PDC) thin films to promote protective oxide formation on TiAl
Mengis, L.; Bik, M.; Petry, N.-C.; Watermeyer, P.; Liebscher, C.; White, E. M. H.; Ulrich, S. A.; Sitartz, M.; Galetz, M. C.
2023. High Temperature Corrosion – Gordon Research Conference (2023), New London, NH, USA, July 16–21, 2023

Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo
Kellner, M.; Schulz, C.; Kauffmann, A.; Heilmaier, M.; Nestler, B.
2023. Crystals, 13 (7), Article no: 1046. doi:10.3390/cryst13071046

Oxidation resistance of polymer-derived (Hf,Ta)C/SiC ceramic monoliths
Petry, N.-C.; Bernauer, J.; Thor, N.; Wen, Q.; Ulrich, A. S.; Ionescu, E.; Kleebe, H.-J.; Riedel, R.; Galetz, M. C.; Lepple, M.
2023. 47th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2023), Daytona Beach, FL, USA, January 22–27, 2023

Microstructural evolution of novel Si(M)(BC)N polymer-derived ceramics upon different heat treatments
Thor, N.; Bernauer, J.; Petry, N.-C.; Ionescu, E.; Riedel, R.; Pundt, A.; Kleebe, H.-J.
2023. Microscopy Conference (MC 2023), Darmstadt, Germany, February 26–March 2, 2023

Single-Source-Precursor Derived SiHf(B)N Ceramic Nanocomposites: Synthesis and Mechanical Properties
Riedel, R.
2023. 11th International Symposium on Nitrides (ISNT 2023), St-Malo, France, May 2–5, 2023

Si-B-C-N-Based Ceramics History and Perspectives
Riedel, R.
2023. Seminarvortrag Nagoya Institute of Technology (NITEC) (2023), Nagoya, Japan, February 3, 2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys
Winkens, G.; Kauffmann, A.; Herrmann, J.; Czerny, A. K.; Obert, S.; Seils, S.; Boll, T.; Baruffi, C.; Rao, Y.; Curtin, W. A.; Schwaiger, R.; Heilmaier, M.
2023. Communications Materials, 4 (1), 26. doi:10.1038/s43246-023-00353-8

Microstructural evolution of Si(HfₓTa₁₋ₓ)(C)N polymer-derived ceramics upon high-temperature anneal
Thor, N.; Bernauer, J.; Petry, N.-C.; Ionescu, E.; Riedel, R.; Pundt, A.; Kleebe, H.-J.
2022. Journal of the European Ceramic Society, 43 (4), 1417–1431. doi:10.1016/j.jeurceramsoc.2022.11.060

Pesting Resistance in High Mo Containing Alloys
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Gorr, B.; Heilmaier, M.
2022, November 30. MRS Fall Meeting & Exhibit (2022), Boston, MA, USA, November 27–December 2, 2022

Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy
Schliephake, D.; Lopes, C.; Eggeler, Y. M.; Chen, H.; Freudenberger, J.; Bayoumy, D.; Huang, A. J.; Kauffmann, A.
2022. Journal of Alloys and Compounds, 924, Artkl.Nr.: 166499. doi:10.1016/j.jallcom.2022.166499

Phase continuity, brittle to ductile transition temperature and creep behavior of a eutectic Mo‐20Si‐52.8Ti alloy
Tirunilai, A. S.; Hinrichs, F.; Schliephake, D.; Engstler, M.; Mücklich, F.; Obert, S.; Winkens, G.; Kauffmann, A.; Heilmaier, M.
2022. Advanced Engineering Materials, 24 (11), Art.Nr. 2200918. doi:10.1002/adem.202200918

A novel nitridation- and pesting-resistant Cr-Si-Mo alloy
Hinrichs, F.; Kauffmann, A.; Tirunilai, A. S.; Schliephake, D.; Beichert, B.; Winkens, G.; Beck, K.; Ulrich, A. S.; Galetz, M. C.; Long, Z.; Thota, H.; Eggeler, Y.; Pundt, A.; Heilmaier, M.
2022. Corrosion Science, 207, Art.-Nr.: 110566. doi:10.1016/j.corsci.2022.110566

Refractory metal-based high entropy silicide-borides: The future of materials beyond MoSiB?
Galetz, M. C.; Ulrich, A. S.; Hasemann, G.; Krüger, M.
2022. Intermetallics, 148, Article no: 107620. doi:10.1016/j.intermet.2022.107620

Oxidation resistance of ZrB₂-based monoliths using polymer-derived Si(Zr,B)CN as sintering aid
Petry, N.-C.; Ulrich, A. S.; Feng, B.; Ionescu, E.; Galetz, M. C.; Lepple, M.
2022. Journal of the American Ceramic Society, 105 (8), 5380–5394. doi:10.1111/jace.18473

Pesting-Resistant Mo-Based Alloys
Obert, S.; Schliephake, D.; Hinrichs, F.; Tirunilai, A. S.; Cong, X.; Gorr, B.; Kauffmann, A.; Heilmaier, M.
2022, July 6. Scientific seminar of the Institut für Komplexe Materialien / Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden (IKM / IFW Dresden 2023), Dresden, Germany, July 6, 2022

Pt accelerated coarsening of A15 precipitates in Cr-Si alloys
Ulrich, A. S.; Knowles, A. J.; Cantatore, V.; Bhowmik, A.; Wharmby, M. T.; Geers, C.; Panas, I.; Galetz, M. C.
2022. Materials & Design, 218, Article no: 110655. doi:10.1016/j.matdes.2022.110655

Influence of Water Vapor and Temperature on the Oxide Scale Growth and Alpha-Case Formation in Ti-6Al-4V Alloy
Öztürk, B.; Mengis, L.; Dickes, D.; Glatzel, U.; Galetz, M. C.
2022. Oxidation of Metals, 97 (3-4), 241–260. doi:10.1007/s11085-021-10088-x

A diffuse-interface model of anisotropic interface thermal conductivity and its application in thermal homogenization of composites
Yang, Y.; Fathidoost, M.; Oyedeji, T. D.; Bondi, P.; Zhou, X.; Egger, H.; Xu, B.-X.
2022. Scripta materialia, 212, Article no: 114537. doi:10.1016/j.scriptamat.2022.114537

Modeling of stoichiometric phases in off-eutectic compositions of directional solidifying NbSi-10Ti for phase-field simulations
Kellner, M.; Enugala, S. N.; Nestler, B.
2022. Computational Materials Science, 203, Art.-Nr.: 111046. doi:10.1016/j.commatsci.2021.111046

Si-based polymer-derived ceramics for energy conversion and storage
Wen, Q.; Qu, F.; Yu, Z.; Graczyk-Zajac, M.; Xiong, X.; Riedel, R.
2022. Journal of Advanced Ceramics, 11 (2), 197–246. doi:10.1007/s40145-021-0562-2

Protective Alumina Scale Growth at 900 °C for a Ni- and Cr-Free Co-Base Model Alloy with γ/γ’-Microstructure: Synergistic Effects by Combining Shot-Peening and Halogenation
Hagen, S. P.; Beck, K.; Kubacka, D.; Zschau, H.-E.; Galetz, M. C.; Spiecker, E.; Virtanen, S.
2022. Oxidation of Metals, 97 (1-2), 209–226. doi:10.1007/s11085-021-10087-y

A machine-learned interatomic potential for silica and its relation to empirical models
Erhard, L. C.; Rohrer, J.; Albe, K.; Deringer, V. L.
2022. npj Computational Materials, 8 (1), Article no: 90. doi:10.1038/s41524-022-00768-w

Monolithic ZrB₂‐based UHTC s using polymer‐derived Si(Zr,B)CN as sintering aid
Feng, B.; Fetzer, A.-K.; Ulrich, A. S.; Christian Galetz, M.; Kleebe, H.-J.; Ionescu, E.
2022. Journal of the American Ceramic Society, 105 (1), 99–110. doi:10.1111/jace.18038

Characteristics of Si-B-C-N-based Ceramics
Riedel, R.
2022. 15th International Conference on Modern Materials and Technologies (CIMTEC 2022), Perugia, Italy, June 20–24, 2022

Advanced Polymer-Derived (Ultra)-High-Temperature Resistant Ceramic Nanocomposites for Energy Conversion and Storage
Riedel, R.
2022. CMCEE (2022), Wuhan, China, June 9–11, 2022

Advanced Polymer-Derived (Ultra)-High-Temperature Resistant Ceramic Nanocomposites for Energy Conversion and Storage
Riedel, R.
2022. Korean Ceramic Society Remote Symposium (2022), Online, April 14, 2022

Mechanical and thermokinetic description of innovative coating systems
Filipovic, J.; Adam, M.; Kontermann, C.; Oechsner, M.
2022. International Thermal Spray Conference and Exposition (ITSC 2022), Vienna, Austria, May 4–6, 2022

Mechanical and thermokinetic description of innovative coating systems
Filipovic, J.; Adam, M.; Kontermann, C.; Oechsner, M.
2022. 23rd Symposium Verbundwerkstoffe und Werkstoffverbunde (2022), Online, July 20–22, 2022

Assessing the structural integrity of plasma-sprayed multilayer thermal barrier coatings
Oechsner, M.; Adam, M.; Kontermann, C.
2022. 11th Thermal and Environmental Barrier Coatings VI (2022), Irsee, Germany, June 19–24, 2022

On the structural integrity of multilayer thermal barrier coating systems
Adam, M.; Filipovic, J.; Kontermann, M.; Oechsner, M.
2022. 10th Les Rencontres Internationales de la Projection Thermique Conference (RIPT 2022), Jülich, Germany, June 1–3, 2022

Micromagnetics and Data-driven Multiscale Hysteresis Simulations of Permanent Magnets
Yang, Y.; Kühn, P.; Fathidoost, M.; Xu, B.-X.
2022. 20th International IGTE Symposium 2022 on Computational Methods in Electromagnetics and Multiphysics (IGTE 2022), Graz, Austria, September 18–21, 2022

Property Tailoring using Powder Bed Fusion Studied by Multiphysics and Multiscale Phase-field Modeling
Yang, Y.; Zhou, X.; Xu, B.-X.
2022. Young Ceramists Additive Manufacturing Forum (yCAM 2022), Barcelona, Spain, November 9–11, 2022

A novel pesting and nitridation resistant Mo-Si-Cr alloy
Hinrichs, F.; Kauffmann, A.; Tirunilai, A. S.; Schliephake, D.; Beichert, B.; Winkens, G.; Beck, K.; Ulrich, S. A.; Galetz, M. C.; Long, Z.; Thota, H.; Eggeler, Y.; Pundt, A.; Heilmaier, M.
2022. Materials Science and Engineering Congress (MSE 2022), Darmstadt, Germany, September 27–29, 2022

Improving the Intermediate Temperature Oxidation Resistance of Refractory Metals and Mo-based Systems
Beck, K.; Ulrich, A. S.; Hinrichs, F.; König, T.; Heilmaier, M.; Galetz, M. C.
2022. International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2022), San Diego, CA, USA, May 22–27, 2022

Solid Solution Hardening in bcc Mo-Ti solid solutions produced via arc-melting
Winkens, G.; Obert, S.; Kauffmann, A.; Heilmaier, M.; Schwaiger, R.
2022. 19th International Conference on Strength of Materials (ICSMA 2022), Metz, France, June 26–July 1, 2022

Improving the Corrosion Resistance of Mo-based Systems
Beck, K.; Ulrich, A. S.; Hinrichs, F.; König, T.; Oskay, C.; Heilmaier, M.; Galetz, M. C.
2022. 11th International Conference on Microscopy of Oxidation (2022), Cranfield, United Kingdom, September 12–14, 2022

Phase-field investigation on three- and four-phase microstructural evolution in Mo-Si-Ti system
Cai, Y.; Wang, F.; Czerny, A. K.; Seifert, H. J.; Nestler, B.
2022. Materials Science and Engineering Congress (MSE 2022), Darmstadt, Germany, September 27–29, 2022

Heterogeneous phase equilibria in the Mo-Si-Ti system at 1300 °C
Czerny, A. K.; Rohde, M.; Seifert, H. J.
2022. Materials Science and Engineering Congress (MSE 2022), Darmstadt, Germany, September 27–29, 2022

Heterogeneous phase equilibria in the Mo-Si-Tisystem at 1300 °C
Czerny, A. K.; Rohde, M.; Seifert, H. J.
2022. Thermodynamic of Alloys (2022), Krakow, Poland, September 12–16, 2022

Investigation of the Oxidation Resistance of ZrB2-based Monoliths Using Polymer-Derived Si(Zr,B)CN as Sintering Aid
Petry, N.-C.; Ulrich, A. S.; Feng, B.; Ionescu, E.; Galetz, M. C.; Lepple, M.
2022. Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications (2022), Snowbird, UT, USA, June 5–8, 2022

Investigation of the Oxidation Resistance of SiAlOC Coated Chromium
Petry, N.-C.; Bik, M.; Ulrich, A. S.; Sitarz, M.; Lepple, M.; Galetz, M. C.
2022. 15th International Conference on Modern Materials and Technologies (CIMTEC 2022), Perugia, Italy, June 20–24, 2022

Oxidation resistance and microstructural analysis of polymer-derived Si(Hf,Ta)C ceramic monoliths
Petry, N.-C.; Thor, N.; Bernauer, J.; Wen, Q.; Ionescu, E.; Kleebe, H.-J.; Galetz, M. C.; Lepple, M.
2022. 11th International Conference on Microscopy of Oxidation (2022), Cranfield, United Kingdom, September 12–14, 2022

Role of orientation relationship for the formation of morphology and preferred orientation in NiAl-(Cr,Mo) during directional solidification
Schulz, C.; Kauffmann, A.; Laube, S.; Kellner, M.; Nestler, B.; Heilmaier, M.
2022. Acta Materialia, 231, Art.Nr. 117857. doi:10.1016/j.actamat.2022.117857

Validated dimensionless scaling law for melt pool width in laser powder bed fusion
Yang, Y.; Großmann, A.; Kühn, P.; Mölleney, J.; Kropholler, L.; Mittelstedt, C.; Xu, B.-X.
2022. Journal of materials processing technology, 299, Article no: 117316. doi:10.1016/j.jmatprotec.2021.117316

3D‐multilayer simulation of microstructure and mechanical properties of porous materials by selective sintering
Zhou, X.; Yang, Y.; Bharech, S.; Lin, B.; Schröder, J.; Xu, B.-X.
2021. GAMM-Mitteilungen, 44 (4, SI), e202100017. doi:10.1002/gamm.202100017

Heterogeneous equilibria in the systems Mo-Si-Ti and Mo-Si-Ti-B
Czerny, A.; Rohde, M.; Hausner, C.; Seifert, H. J.
2021, October 7. Intermetallics (2021), Bad Staffelstein, Germany, October 4–8, 2021

Heterogeneous phase equilibria in the Mo-Si-Ti system
Czerny, A.; Rohde, M.; Hausner, C.; Seifert, H. J.
2021, September 16. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2021), Online, September 13–17, 2021

Behavior of copper‐containing high‐entropy alloys in harsh metal‐dusting environments
Galetz, M. C.; Schlereth, C.; White, E. M. H.
2021. Materials and Corrosion, 72 (7), 1232–1242. doi:10.1002/maco.202012075

Discontinuities in Oxidation Kinetics: A New Model and its Application to Cr–Si-Base Alloys
Ulrich, A. S.; Glatzel, U.; Galetz, M. C.
2021. Oxidation of Metals, 95 (5-6), 445–465. doi:10.1007/s11085-021-10029-8

Tensile Creep Properties of Cr-Si Alloys at 980 °C in Air—Influence of Ge and Mo Addition
Pfizenmaier, P.; Ulrich, A. S.; Galetz, M. C.; Glatzel, U.
2021. Metals, 11 (7), Article no: 1072. doi:10.3390/met11071072

Advanced Polymer-Derived (Ultra)-High-Temperature Resistant Ceramic Nanocomposites for Energy Conversion and Storage
Riedel, R.
2021. Seminar an der Waseda University (2021), Tokyo, Japan, October 8, 2021

Ein mechanismenbasiertes Konzept zur Bewertung der Strukturintegrität keramischer Multilagen-Wärmedämmschichten. PhD dissertation
Adam, M.
2021. Technische Universität Darmstadt (TU Darmstadt). doi:10.26083/tuprints-00020057

Property Tailoring using Powder Bed Fusion Studied by Multiphysics and Multiscale Phase-field Modeling
Yang, Y.; Xu, B.-X.
2021. Seminar Numerische Mathematik und Mechanik, Institut für Mechanik (BauWi), Universität Duisburg-Essen (2021), Essen, Germany, April 1, 2021

Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels
Yang, Y.; Doñate-Buendía, C.; Oyedeji, T. D.; Gökce, B.; Xu, B.-X.
2021. Materials, 14 (13), Article no: 3463. doi:10.3390/ma14133463

Protective Diffusion Coatings on Refractory Metals
Beck, K.; Ulrich, A. S.; Galetz, M. C.
2021. Materials Science and Technology: Technical Meeting and Exhibition (MS&T 2021), Colombus, USA, October 17–21, 2021

Flexible Powder Production for Additive Manufacturing of Refractory Metal-Based Alloys
Hinrichs, F.; Kauffmann, A.; Schliephake, D.; Seils, S.; Obert, S.; Ratschbacher, K.; Allen, M.; Pundt, A.; Heilmaier, M.
2021. Metals, 11 (11), Article no: 1723. doi:10.3390/met11111723

Flexible powder production for additive manufacturing of refractory metal alloys
Hinrichs, F.; Schliephake, D.; Seils, S.; Obert, S.; Kauffmann, A.; Ratschbacher, K.; Allen, M.; Heilmaier, M.
2021. Intermetallics (2021), Bad Staffelstein, Germany, October 4–8, 2021

Protective Chromium Diffusion Coatings on Refractory Metals
Beck, K.; Ulrich, A. S.; Hinrichs, F.; Heilmaier, M.; Galetz, M. C.
2021. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2021), Online, September 13–17, 2021

Investigation of the Oxidation Resistance of ZrB2-based Monoliths Using Polymer-Derived Si(Zr,B)CN as Sintering Aid
Petry, N.-C.; Ulrich, A. S.; Feng, B.; Ionescu, E.; Galetz, M. C.; Lepple, M.
2021. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2021), Online, September 13–17, 2021

Protective Aluminum and Chromium Diffusion Coatings for Refractory Metals at High Temperature Exposure
Ulrich, A. S.; Beck, K.; Galetz, M. C.
2021. Intermetallics (2021), Bad Staffelstein, Germany, October 4–8, 2021

Phase-field investigation on the peritectic transition in Fe-C system
Cai, Y.; Zhang, Z.; Nestler, B.; Fei, W.
2021. Acta Materialia, 219, Art.-Nr.: 117223. doi:10.1016/j.actamat.2021.117223

The Creep and Oxidation Behaviour of Pesting-Resistant -Containing Eutectic-Eutectoid Mo-Si-Ti Alloys
Obert, S.; Kauffmann, A.; Pretzler, R.; Schliephake, D.; Hinrichs, F.; Heilmaier, M.
2021. Metals, 11 (1), Art.-Nr.: 169. doi:10.3390/met11010169

Characteristics of Si-B-C-N-based Ceramics
Riedel, R.
2020. CIMTEC 2020 (2020), Montecatini Terme, Italy, June 15–23, 2020